Learn how to use the SOLIDWORKS assembly and sheet metal features to create pipe connections and structure members copings. Quick Tips video presented ...
Thanks for asking! The circular cut on the run is done in the same manner
as the branch. The attached assembly & parts show both cuts. I chose to use
the end of the branch as the sketching plane to keep features at a minimum.
Unlike the cut in the branch, I undersize the hole in the Run part
slightly. This tends to create better geometry that yields a better
assembly in true production. Regards, Tandy Banks Elite Applications
Engineer
Just me talking about a technique called the flat wrap and its variations. This probably isn't how Peter would explain them and my examples of the onside flat ...
Sorry for the crazy audio at the beginning and the weird crashing noise partway through. Part 2 of a short lecture on flat wraps by Arrakis, recorded in Anvard in ...
PS: I'm emphasizing the elbow and arm mechanics pretty hard because they're
so different from a deep wrap or false-edge wrap, but you NEED to engage
your hips and shoulders in these shots.