In questo video vi mostriamo l'unpack e le caratteristiche principali delle memorie RAM Corsair Vengeance Low Profile DDR3 8GB. Nell'articolo sul sito potete ...
Sì, le ho montate in quella scheda madre. Mi sono sembrate ottime, anche in
overclock (senza problemi ad oltre 2000 MHz)... le sto tuttora usando e non
hanno mai dato un problema... e poi hanno un ottimo rapporto qualità-prezzo
:)
Picked up some of this ram for £43. 1866 hz cas 9, running at 1.35-1.5v.
Good ram for using with sandy/ivy cpu which requires 1.5v not 1.65v which
will void your warranty and possibly burn out your cpu sooner. Don't be too
concerned with the low heat spreaders, DDR3 does not really need them, they
are mostly for show/overclocking. And for most people overclocking the ram
isn't really important as it hardly effects pc speed. Hope this helps
anyone looking to get (this) ram
Ram isn't too important for gaming, as long as you have enough of it (id
say 8GB to be safe) I doubt you would notice a difference between say
1066MHz ram and 1600MHz ram when gaming.
No, I'm pretty sure its the same stuff just with a taller heat sink, If the
timings and speed are the same the performance will be near enough
identical anyway.
AMD FX-8350 Overclocking-Test! 4 GHz vs. 4,8 GHz im Cinebench!
In diesem Video vergleiche ich die Rendergeschwindigkeit eines FX-8350 auf zwei verschiedenen Taktraten - gegenübergestellt wird der Standardtakt von 4,0 ...
+luis takayama windows 8.1 runs like shit on my fx8350 windows 8 too windows 7 fullly updated doing it very nice windows 8.1 45 - 210fps minecraftwindows 8 79 - 290fps minecraftWindows 7 155- 1780 fps minecraft
I'd definitively go with the FX-8320. Should easily run at 4.0 GHz+ without any voltage increase. From what I've heard, FX-8350-chips are barely 'better overclockers' than the FX-8320 ones.
Great vid, I really like the mATX setup you've built, I'm might just have
to build one like it myself, haha... The only way you could eek out a bit
more out of that system is if it is a C2 CPU that way it can run DDR3
2133Mhz without any issues, either that or by throwing even more money at
the build and upgrading to both a 3970x and 4x4Gb DDR3 2133 (I wouldn't
suggest 2x8gb modules for some reason they just mess up the OC on the CPU
side...)
Yes, both the GPU was OCed simultanously Yes, 860watt is perfectly enough.
Check my other vid where i show even 800watt is enough for 2xGTX690!!! yes,
i still use the 860watt PSU.
hey i have a couple questions, Firstly are both GPU's at 1100+ mhz? Does
the 860 watt psu support the needs perfectly are you still using the 860
watt psu?
Mehr Informationen hier in der Beschreibung ▽ ▽ More information here in the description ▽ ▻▻ Info ▻▻ ▻Es ist mein erster Edit also bitte nicht so fies sein ...