2008 mazda 3 rear view mirror Videos

I just installed a navigation radio in my 2013 suburban. I want to get the rear view camera to work on my navigation unit. It currently runs to the rear view mirror. Do you know an easy way to do this task? I have heard of splicing into the kick panel?

thank you for posting this video, I was trying the same method as everyone else, by trying to find the spring clip. I did not have a flathead anywhere in the house to even pry it up. Then, I ran across somoone elses video although I can't find it now. There is a small star tip screw on the back side of the button where it attaches. It just unsrews and the button comes off. No prying, no damage and no brute force. I hope this helps, but honestly if it hadn't been for your video, I would have never known that there were some mirrors that did not have the spring clip. Thank you.

hi i have one of these in my old school chevy tahoe and mine the comp works just fine but my temp is now reeding SC as in SHORTED CIRCUIT CAN I FIX THIS OR DO I HAVE TO REPLACE THE POWER MIRORR PLEASE SOMEONE LET ME KNOW

PS....... The Temp Sensor is located in the front driver side next to the bottom running light pointing towards the radiator.

I got one from my local junk yard out of a 2003 Chevy Pu. I have an 2002 Chevy Silverado 2500 HD. I pulled the entire harness and the ambient sensor harness reinstalled it in my truck ( "But did a bench test first to figure out what wire did what" ) works great temp is very accurate. Solid Yellow is Power,,,, Solid Black is ground,,, Black W/ white strip and Green W/ white stripe go to temp sensor,,, Solid Blue air bag on... Solid dark Green air bag off... I'm not using the air bag wires don't need them. Solid Pink not used... Solid Gray not used... Light Green I think works the auto dim But I cant get it to dim??? It worked on the bench test but don't remember how I did it? You don't have to go to the revers wire to make auto dim work you just tie two wires together but cant seen to recreate how I did it on my bench test??? Please make a better video on what color you touched to make auto dim work. Also note what wires you are using and what wire goes to the light green to make auto dim work. Do you touch positive or negative? Thanks,

"this thing goes over here and that thing is now going to go over there"... fantastic - this thing here is the future of our education system... I guess shit like "light refraction" was just too much of a hassle to explain & teach.

hi, it has 2 light sensor one facing front and another facing rear. during night time if the rear sensor sensed the light source is greater than the front it will then auto dim so to answer your 2nd question is "yes".... thanks!