How to remove k cup assembly Videos

So what I'm gathering, and what you may not realize you've discovered, is a HELLA design flaw with these pieces of shite. Coffee grounds get jammed up inside. Where they sit, forever, nice and wet and fermenting. And your coffee water goes thru that every time you make a cup. Sounds gross. I got rid of mine when I read that the guy who invented the system back in the 90's hadn't meant for it to go mass market and he feels really guilty about the amount of waste these cups put into landfills, since the plastic used is a non-recyclable, non-biodegradable mix. In 2014, enough of these cups were sold to circle the globe TEN AND HALF times. So when your machine dies? Don't fix it: bury it. //www.theatlantic.com/technology/archive/2015/03/the-abominable-k-cup-coffee-pod-environment-problem/386501/ 

Can you get more than one cup per capsule? Or do you have to pop a new one in for each cup.

Thank you for the demo it was most helpful.

Is there a way that I can just make this cold? Like a setting to not heat it up before it comes out?

So glad I didn't purchase this machine. Kmart had it on sale for $39.99. Something just didn't feel right about it. 

I have had my HBflexBrew, single cup for several months. No matter what pod I use, there is a metallic odor and taste to the coffee. I have cleaned the machine with white vinegar followed by multiple rinses; but, nothing seems to help. Did I buy a lemon? No one else has posed this concern. Thanks.

I have a question. Is this machine supposed to pop a hole in the back of the k-cup? I know it's supposed to puncture a hole at the top of the k-cup but I also see a hole at the back of it too. 

We love our Mr Coffee Keurig until it starts leaking all over the counter. We are now on our 4th Mr. Coffee, all replaced by the company because they were still under warranty. Any ideas why this is happening, can't seem to get an answer from the company

hi michael. great video. i did notice that you over filled the water tank. there is a water fill line on the side. i know no big deal right. i've had mine now about 6 months and its a pretty good machine. i got mine from amazon. when i use my own coffee in the reusable k cup it brews a really weak cup even with a full k cup of coffee so what i do is i take a used k cup and remove the foil and cut off the lip and set my reusable down inside this. the flavored k cups have a tiny hole at the bottom which in turn slow down the water as it passes through thus making a stronger brew. 

Thanks for your review. Does it works with 220v or just 110v? Your post was 3 month ago, is still working good your machine? thanks for your help! best

Waste of time!!!

i start to feel vibrating and noises on a decent, should i service my bearings?

Are you guys connected to global mountain biking network in any way

Love your chanel guys! I'd love to see a video about how to choose a set of wheels, I'm saving up to get a new pair soon, and there's so much choice...

You said you were surprised the factory grease was still in the bearing. Very ballpark what sort of mileage do you expect factory grease to last?

I'm thinking of taking part in a race and looking like a proper retard. Is it possible to ride on my left side, Look Keo pedal, cleats and shoes and on my right side, Shimano pedals, cleats and shoes? I was wondering if they have different places on the shoes in terms of how far back or forwards the cleats need to sit on my foot for different pedal shapes. Also, would I look like a dense cyclist if I had SRAM rival on the front derailleur and left side handlebar "brifter" and Shimano 105 on the rear derailleur and right side handlebar brifter? Also, should I ride with different coloured shoes to top off that retard look? Oh, and should I ride pink bar tape on one side and orange bar tape on the other? :3

What types of grease can you use?

have you put on a little weight there Si?

VIDEO REQUEST: When to replace your rims? what do you say?

Thank you!! That worked for a quick fix. I'll descale with vinegar tomorrow when my husband is gone. He hates the smell! lol

I had been working on my machine for hours trying to figure out why the stitches weren't working and thread was breaking. I did see a little piece of thread finally as this video attests but didn't know how to get it! You made my day! Video was awesome. Thanks!