@rninanusa A. Purchase a blank key and have it cut B. Insert original key
#1 into ignition and turn to On C. Wait 5 seconds and turn key to off D.
Immediately insert original key # 2 into ignition and turn to on E. Wait 10
seconds for SKIS indicator in dash starts to flash F. Turn ignition off,
insert new blank key and turn ignition back on G. Once SKIS light stops
flashing and turns off, your new key is programmed
Don't pay the dealership for something you can so simply do yourself :) you can order your replace fob via amazon.com from the shipper discount keyless or via ...
They sell they key without the remote start button I believe it's the "4 button key fob" you should be able to "use" the fob that has the remote start option however you wouldn't have remote start feature unless you pay to have that feature installed into your vehicle.
As far as doing it yourself unfortunately no you would have to buy a 2nd fob and go to a dealership and get it programmed but it's cheaper and will still save a good chunk of money by ordering a replacement key fob off amazon or eBay
You should be able to do that y. It's worth trying worst case it doesn't work but the new key fob from the dealership would be the most expensive part. So worst case ordering one of these fobs off amazon if it doesn't work you would only have to pay for programming which should be ballpark 50- 70ish is what it is where I am located so could be more could be less depending on location
hey man i have a 2012 challenger with no remote start but i have a push to
start..no key entry.can i do it the same way you are doing it if i purchase
a new key fob with remote start?