Jeep xj bull bar Videos

if you wanna flip your video, you can. Select it in photo booth, then hold "command" and hit "F", then your video should be facing the right way

damn tht bull bar sticks out like a sore thumb

you think that your bull bar is out a ittle

I was kinda thinkn the same thing.

reverse the mounts

+Vishal Patel i live in Missouri too. What shop did your front Windows?

+mrklimczyk it was just one i found on ebay. They have bunch on there. Just search and you'll be able to find one you like.

+József Milán Pintér The air flow on the cone was actually much better than the stock box. The pipe wasn't bent too bad, especially after i fixed the braces to secure it in position better. Most (a majority) of bull bars are universal fits. It actually fit a lot better once I welded the brackets onto the frame. This video was taken very early on with the upgrades.

+utz716 We have installed and sell LED headlight replacement kits. In MOST cases CANBUS is not a problem we do cary various cancelers and resistor harnesses that when used in combination with LED headlight kit remedy any code that is thrown. Also in SOME rare cases high beam cannot be retained. For more information please contact us directly @ (516)489-2350 or shoot us an email at [email protected]

+tailfirst One of the owners in the video considers actually to go with full mud tyres in the near future and tries to figure out how to fit 32" on the Trailhawk. Thanks for your comment mate. :)

+Down Thunder 4x4 Community you didnt even begin to push the trail hawk , no joke, its a bad little machine off road.. i have the 4 banger, mine came 4:56:1 it will crawl.. it would take someone with skill to leave me on the trail i traded in my JK Sahara n on the Hawk, no regrets.. great video!

+John Michael Thanks for your comment! I appreciate your support! Thanks for watching! #jeepwave

+John Gaeta Haha no problem! If you were able to get it off I think you should be able to get it back in. What I would recommend is probably to cut the holes in the plastic and put it back in place before you install the Bull bar. So you can just push the bar from under the plastic up through the holes you made. Hope that makes sense. Thanks for watching! Good luck!

+John Gaeta Thanks for your comment! I cut the holes out with a drill and a 1in circle cutting bit. A dremel might be difficult because you would need to cut a circle. The material is only plastic so it is not difficult to make the hole. You don't need to remove the grill to put this piece back in place. Once the front bumper is off it will simply slip right under the grill. I hope this helps! Thanks for watching!

+teo030794 Thanks for the comment! Yes, it really gives the Jeep a nice look! Thanks for watching! #jeepwave

+Jennifer Garcia No problem! Anytime! Check the link in the description for the Razerauto Grill! Thanks for watching! #jeepwave  

Thanks a bunch! I think Ill look into an aftermarket grill(:  Appreciate the videos!

+Jennifer Garcia Hey! Thanks for the comment! My stock grill was white as you can see in previous videos and I chose to upgrade my grill for a more aggressive look. I went with the RazerAuto grill (linked in the description) because it has that angry kinda look that I wanted. This grill comes in several color options (Gloss black, matte black and white) I got the matte black to match my bumpers and fenders. If you don't wana buy a new grill you could easily remove your stock grill and get it painted black. I would recommend you use a high quality automotive paint or take it to a local body shop. If you want a more aggressive look then you can buy an aftermarket grill like mine and it will come in black. Feel free to add me on IG or Twitter (adventuredex) to see more photos of my Jeep. Hope this helps! Thanks for watching!

+John Gaeta Thanks for the comment! Be sure to check the link in the description for the exact product. Currently I have a 20" rough country LED on top and I love it! I would also recommend check out Auxbeam products. They are really good and affordable too! I installed it on the top cuz I thought it looked better but you can install it under the bar for more protection. Hope that helps! Thanks for watching!

+BC Bell Hey bro! No way, I hope you had a great time! That would of been funny if you seen my Jeep drive by! :p Thanks for the continued support! Enjoy the holidays too! Thanks for watching!

+JeepArmy USA Thanks Z! Yeah I have really grown to love it too! Thanks for watching!

+Joe Perez Thanks for the comment bro! It is an awesome mod to the front bumper! Thanks for watching!