Home » Video » ...

Diy lvds to vga Videos

Diy cintiq from hp tc4200

turned an old wacom based convertable laptop screen into a wacom tablet for any computer with a dvi/vga, and usb. //www.pjrc.com/store/teensy.html ...

User Comments

Adam Kearley commented on 11 Oct 2015

Is there any soldering involved in this setup?

RedFathom commented on 11 Oct 2015

+Adam Kearley yes but less if you don't need the buttons to work.

Turning an Old Laptop Screen Into a DIY Video Light

Inspired by recent "Fake window -light" video, made by Matt at DIY-Perks channel, I finally hacked an old netbook screen into a portable light panel. Be sure to ...

User Comments

Rich kim commented on 22 Oct 2015

awesome! can you show how to make it so that you can connect to a usb charger pack (like the yellow one in your video)?

Hugatry's HackVlog commented on 22 Oct 2015

+Rich kim I'd say you should watch DIY Perks' video (link in the description), especially from 3m19s onwards.If I was to make video where I show setting up the connections with a USB-plug, I would say the same things, with just few modifications:- Make sure to check that the backlight circuit uses 5V for both, power and signals, by Googling with screen's model number- No need for the two resistors, connect PWM and LED_EN pins as well as the VLED pin to red wire of USB-cable.-Connect GND to black wire of the USB-cable.Me making a new video about that wouldn't give much new information and I'm short on time at the moment, so unfortunately I won't be making that video, sorry.

Rich kim commented on 22 Oct 2015

+Hugatry's HackVlog could you show a video of setting up the screen with a usb plug?

Hugatry's HackVlog commented on 22 Oct 2015

+Rich kim Thanks!The red PCB and the battery I'm using are essentially same thing as the yellow power bank, but without a plastic case. I connected positive and negative wires from USB-port throught a switch to the backlight circuit's positive and negative pins. I also needed to connect the "enable"-pin of the backlight to 5V (positive wire coming from USB).As my screen's backlight uses 5V, I could power it from any USB-port that provides enough current (600mA in my case).

PS4 Portable Screen [DIY]

I turned LCD screen from my broken laptop into portable PS4 screen.

Old 15,4 LCD Reborn - DIY TV/Monitor

This is a test of DIY Project. M.NT68676.2A LCD control board and Fujitsu Siemens LCD screen! Everything works great!

User Comments

luis Sansores commented on 27 May 2015

Where you bought the Diy? Could you give me a link?

Albertas P. (albyzas) commented on 30 May 2015

Hi, yes. My project is to create a TV set. I have all necessary parts but I am still missing the frame. The frame will be made of laser-cut plywood. I want to model the frame using AutoCAD but it's not so easy :) Greetings from Lithuania!

luis Sansores commented on 29 May 2015

+Albertas P. Thanks !!one more questionAre you watching televison with diy card ?Greetings from Mexico

Albertas P. (albyzas) commented on 27 May 2015

Hi,at eBay search for this item M.NT68676.2A. I bought it at "e-qstore". I was very satisfied.