Home » Video » ...

How to uninstall cmd Videos

Como encontrar vírus no Pendrive e deletá-los pelo CMD. (VLW!!)

User Comments

Otavio Frederico Estarque Da Silva commented on 02 Oct 2013

baixa o programa PW CLEAN Ferramenta para retirar vírus que transforma pastas em atalhos (Desinfecta pen-drive e computador) Disponibilizei uma ferramenta que repara o pen-drive e as pastas e retira o vírus também do computador, impedindo de infectar novamente outros pen-drive A merda do youtube nao deixa postar o link

Adam Basilio commented on 30 Oct 2013

attrib -s -h -r /s /d f:\*.* no caso do f, vc tem que colocar a letra do disco do seu pendrive.. se for f, poe f.. se for e, poe e.. vi isso em um outro tutorial.. sempre funcionou comigo =)

Rodrigo Zamprogno commented on 29 Oct 2013

Amigo, o meu pendrive está infectado mas não aparece o autorun no prompt de comando e nem dentro do pendrive mas encontrei a pasta RECYCLER no disco local do computador. o q eu faço?

Analha Pinheiro commented on 25 May 2015

Fiz isso e não apareceu o vírus, mas quando abro a unidade os atalhos ainda estão lá e a pasta do vírus oculta. Já tentei de várias formas remover esse vírus, mas não consigo

Veronica Ambrosio commented on 05 Nov 2013

Fiz extamente o que vc falou! E retirei o virus, MAIS reneciei o pc, e os arquivos deste pen estavam em atalhos! o virus no meu aqui é o sydefudfls.MOS-DW

Claudinei de carvalho macedo commented on 28 Aug 2013

Amigo, colocou no cmd autorun.ini e não . inf que é o nome do arquivo.

pedro winnycius Caran commented on 05 Mar 2012

Nao conseguia excluir este autorun.inf,agora eu consigui, vLeu aiiiii

atelie vagalume encantado commented on 21 Sep 2013

beleza cara!teu video me ajudou muito consegui me livrar do virus!

Luiz Felipe commented on 20 Aug 2013

Ei cara, aumenta o som ai por favor!

stephanie rodrigues commented on 17 Oct 2015

tira o bode dentro da boca kkkkkkk

marcos siqueira commented on 28 Aug 2015

porra parece que morendo cara

Sergio Brito commented on 19 Mar 2015

Valeu meu amigo, tudo de bom.

Paulo Henrique commented on 17 Jul 2013

Valeu Brother muito obrigado

Ian Araujo commented on 05 Mar 2012

tu e foda de nascenssa??

MasterDani commented on 09 Sep 2013

o Som ta normal aqui

dinda cds souza commented on 13 Aug 2013

muito bom cara[

Fabio Vicente commented on 11 Sep 2013

muito bom cara

pedro winnycius Caran commented on 05 Mar 2012

Valeu cara, eu

Carbonera commented on 27 Jul 2013

nao deu

shortcut virus remover cmd on windows 7

shortcut virus remover cmd on windows 7 hier How To Remove Modern Shortcut Virus in 30 Seconds or Less ... How to kill shortcut virus in my laptop [Solved] ...

como remover virus pelo cmd,

inscrevão se no meu canal paulotutoriais.

User Comments

Tulio Rodrigues Bittar commented on 17 Jan 2015

isso não funciona , é mentira , vai estudar seu merda isso não remove vírus só analisa o HD , vai se fude seu lixo

Raphael Philips commented on 07 Dec 2015

QUE VIDEO BOSTA, VOU LOGAR AS MINHAS OUTRAS CONTAS SÓ PRA TE DAR DESLIKERS

paulo cesar commented on 22 Sep 2015

vc é um merda seu panaca

paulo cesar commented on 22 Sep 2015

kkkkkk

How do I uninstall a Liberty feature with the featureManager command?

Uninstall Program using Command Prompt (CMD) - বাংলা

Replace Mercruiser Transom Switches WITHOUT removing lower unit

Replace or Repair Mercruiser Transom Switches WITHOUT removing lower unit.

User Comments

swalesutube commented on 27 Oct 2013

A long extension will make it easier. BTW... unfortunately for me... I might as well have removed the lower unit as my shifter cable broke the other day. The outer cable casing broke right after the shifter bellows. I had to drop the lower unit and fix the cable at a campground... at night... So I recommend you look closely at your bellows and shifter cable. If either need fixing then just remove the lower unit and do it all at the same time.

swalesutube commented on 22 Aug 2013

Unfortunately it looks like a no go on the ratchet. Honestly I did not try very hard as I already has the bolt fairly tight. Best option is to use a thin wall 7/16 wrench as long as possible. In my case I only had half of the wrench. Possibly with the open-end I could have switched back and forth between it and the closed end to get the indexing right and tighten the bolt more.

liveinmyamerica commented on 21 Nov 2014

Thanks for the video and information, boat dealers screw the boating public every chance they get. I just changed a trim lift hydraulic line behind my stern drive. The boat shop wanted $250.00 for some kit that would really fix me up, I went to a shop that makes hydraulic hose and they rebuild it for $7.23.

Anson A commented on 15 Oct 2015

I have a broken wire by the trim limit unit. If you wanted to bypass the limit switch temps tilt, could you just jumper the two wires together so that your console limit switch would work, using caution obviously to not raise your leg too high while on plane.

swalesutube commented on 18 Oct 2013

The fix worked. No issues. If I get another 20 years out of these wires I will be happy. BTW the 12 volt to water comment makes little sense... You need these units to properly trim your lower unit. You are reading resistance not putting 12 volt into water.

Fred Debbie Lehman commented on 26 Oct 2013

Thanks for the video and information. I'm going to try the same thing on my twin 2004 Bravo 2's. I'm hoping I only have one bolt to remove instead of the two you had. How long of an extension did you need on the 7/16" wobble head socket? Thanks again!

D Wetick commented on 20 Oct 2013

As an electrical engineer, I can tell you that ALL your boat's wiring is being degraded by putting that12 VDC into the water...DON'T DO IT! Why do you think that wiring is actually desintegrating in your hands! I have pictures to prove it too.

D Wetick commented on 16 Oct 2013

Don't bother trying to fix this device...you are sending 12 VDC into the water and ALL your boat's wiring will eventually suffer degradation...why do you think the wiring you have in your hand looks so bad? I speak from experience!

austinhydroax commented on 27 Sep 2015

Excellent video, my wires are fine but I need to clean out the switches and verify connectors and your video really helped me see what I need to do here. Thanks!

D Wetick commented on 22 Oct 2013

Your fix isn't to last very long...I guarantee it! I had trouble with this device the very first year I bought the boat...and it was a new boat, never in the water.

Robert Gough commented on 23 Aug 2013

OK, I have several 7/16 wrenches since I prefer to tackle my own work before pulling in the pros. Thanks and I'll let you know how I made out on my replacement.

swalesutube commented on 21 Oct 2013

Mercruiser has been using this design for over 50 years... So maybe you should bring up your concerns to their Electrical Engineers.

Burl Nicholson commented on 09 May 2015

Awesome! Thank you for doing this video. I was just about to tackle this job myself wires in the same condition.

Burl Nicholson commented on 09 May 2015

Lamp cord should work fine apparently mercruisers wire is not coastguard approved either lol nice job again sir

Robert Gough commented on 20 Aug 2013

My boat is a 84', same issue with wires.In the end, did the swivel/ratchet wrench work for the top bolt? Thanks

Nate Coston commented on 10 May 2015

thanks for sharing, I have the same problem, hope to have it fixed soon.

Ryan Daniels commented on 13 May 2015

Thank you much! Great video that just saved my bacon.

swalesutube commented on 12 Nov 2015

2yrs and the repair is still working great!

Link for boards:

Link for your site:

Current link: