Home » Video » ...

Ford galaxy piston rings Videos

Accord Piston Replacement - Timelapse

Used Framelapse and Samsung Video Editor Apps to produce this video using my Galaxy S5.

Piston to valve clearance

600 lift can does not see full lifter travel until piston is more than 2 inches down in the bore. Piston to valve max closeness is not when piston is at top dead center ...

User Comments

carlos angel commented on 05 Nov 2015

I have the same piston on my 331 u think it will clear a 600 lift cam?

2014 06 03 390Engine

This is a 390 from a '73 F-100 pickup. The block was tanked, Magnafluxed (to detect cracks), decked and bored +.040", main and rod bearing +.010". Pistons are ...

User Comments

Laurent Lesage commented on 18 Jun 2014

Hi, I followed your blog Squarebirds, you did a good job, and very informative, I am rebuilding a 360 into a 390! Glad to see the engine is running, and yeah it sounds badass without headers!... Thumbs up

simplyconnected commented on 11 Jun 2014

Check out how smooth this engine is. It has no exhaust manifolds on the stand so it is loud. Even so, there is no lifter noise. Comments?

Removing Rod from Piston

Removing Rod from Piston.

HighTechNews - Folge 57 - Ring , Le Chal , Samsung Galaxy Glass

Facebook : https://www.facebook.com/HighTechNewsGerman Viel Spaß ;) Ring : https://www.kickstarter.com/projects/1761670738/ring-shortcut-everything ...

Tranny Rebuild for Helena's 300C

Examples of 2/4 clutch piston and seals (old & new) along with burnt reverse clutches.

j5 design & fabrication trophy truck run

My pre runner TT's last run on a missing front brake caliper/snapped rotor and motor about trashed. when the motor was pulled all the valve guides were ...

Pantera #1765 initial startup

Initial startup of Ford 351C built by Dave McLain in Cuba, MO. Simple hydraulic cam, 4V quench heads with stainless valves, Ross Racing .020 over flattop ...

Link for boards:

Link for your site:

Current link: