Home » Video » ...

Chrysler minivan dashboard symbols Videos

2010 Chrysler Town and Country Fails to Upshift #2

Date & Time: 2014-09-18 4:53:16PM Video #2 showing that my minivan fails to upshift. Please note that the vehicle is in Drive and there are no warning lights.

2008 Chrysler Town and Country Limited - for sale in Hollywo

CARSTRADA INC 6023 HOLLYWOOD BOULEVARD in Hollywood, FL 33024 Come test drive this 2008 Chrysler Town and Country Limited for sale in ...

99 Town and Country Dash recalibration sequence will not finish

Using the reset trick on this 99 Town & Country doesn't do the trick. The recalibration sequence hangs without finishing. If you have any ideas let me know.

User Comments

ayebretwalda commented on 28 Feb 2011

@dave412r Yes I got a brand new control panel (what you see in the vid - the buttons, dials, etc - attached inside is a control module board) off ebay for around $50 and everything works now. You have to take yours out and note the color of one of the wiring sockets. If I remember correctly it corresponds to VIN and the part number. There's 3 different kinds - black white and green. going off memory - check out the forums at chryslerminivanDOTnet for more info.

ILIGANO commented on 02 Apr 2011

I was getting a noon-er BJ from this black hooker and she bumped her hair weave against the A/C control knob, and now my van is doing the very same thing! Could it bee the afro sheen shorting out the contacts? or do I need to see a dealer?

grkid89 commented on 03 Feb 2014

I see your problem, you need to move both sliders from the "hot" to "cold" and then turn A/C fan to high, and then press the buttons (rear wiper spray and the snowflake one together.) See if that helps.

ayebretwalda commented on 28 Feb 2011

@dave412r looking at the old...only one big socket in the back - mine was a translucent green. The other versions were white and black.