Enter your query, example: how not cry when slicing onion or how to enter an Free Italian Sex Webcams?

1968 dodge charger throttle cable Videos

Lokar throttle cable installation, 1967-76 mopar A-body

Easy to install and adjust.

User Comments

https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
its "measure twice cut once"
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
+MAKAVELLI228 thanks
https://lh5.googleusercontent.com/--vvAqsmLSHo/AAAAAAAAAAI/AAAAAAAAHu4/ES1ALfjJVQ4/photo.jpg?sz=64
Nice video! Very informative. I have a '74 Duster that I'm building. This helps me quite a bit. Good job!!
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
+Joey Garcia Thank you. I was initially against using these because I'm a purist, but it's a very nice kit. You'll be happy with it.
https://lh5.googleusercontent.com/-15fyKjsBCbM/AAAAAAAAAAI/AAAAAAAAAAg/WzjkmhRR0fM/photo.jpg?sz=64
Is that bottom cable the kick down linkage? And can you give me the part number for the throttle cable bracket?
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
+Kev4PS3  Yes, that is the kickdown on the bottom, which is it's own kit # KD-2727HT. The cable bracket is actually called the spring return bracket part # SRK-4000 and the throttle cable is just their universal 24" cable that you trim to fit.

1970 Dodge D100 NEW Radiator from Engineered Cooling Products

I forgot to mention this only cost $219. //www.speedcooling.com/Mopar-26/prod_60.html ...

User Comments

https://lh5.googleusercontent.com/-d8KfMyqPAIE/AAAAAAAAAAI/AAAAAAAAADw/44Mnzbh3uD0/photo.jpg?sz=64
hey bro i love your channel its very inspiring for me the 68 charger is the car i want to get when i turn 16, back to my point do you know that you could make money off of youtube look it up it is called adsense
https://lh5.googleusercontent.com/-cKOB0hPQCAw/AAAAAAAAAAI/AAAAAAAAALY/GbdmM33pD4Q/photo.jpg?sz=64
I'm already signed up with them

Open Headers Trans Am Road Test

Jordan got his new throttle cable installed today, so we decided to take the Trans Am for a little spin. In this video, it's only running through open headers and ...

User Comments

https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
What transmission does it have?And what shifter is that?I enjoyed the Videos
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Awsome!Thanks for answering my question so quickly.I have a fourth gen v6 eager to do a carbureted v8 swap.I know there is quite a bit of difference between The generation s I was gonna go fuel injection but the wiring looks like a nightmare
https://lh5.googleusercontent.com/-3PenjpvCPzo/AAAAAAAAAAI/AAAAAAAAAIo/nqg8ObclmG0/photo.jpg?sz=64
+Jason Phillips It's a 700r4 automatic, with a shift kit and upgraded servo. The shifter is a B&M Megashifter. Thanks for watching!
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
How much did all that cost and how much horsepower is that thing making. Im looking to do the same thing to my dads 84 trans am.
https://lh3.googleusercontent.com/-0HPssfjOiL4/AAAAAAAAAAI/AAAAAAAAAU8/0PDZ_knN124/photo.jpg?sz=64
+kohlman weigel That's what I'm wondering!
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
That was freekin great!!!..im glad to see this young dude livin the cool life...and I enjoy all the ramblinaround videos, keep'em coming
https://lh5.googleusercontent.com/-3PenjpvCPzo/AAAAAAAAAAI/AAAAAAAAAIo/nqg8ObclmG0/photo.jpg?sz=64
Thanks for watching, we appreciate it!
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
hey i've got the same exact car as you guys and i dont know much about cars but im trying to understand them a bit more and im looking at swapping the engine out and i've got the money for it to get a high class engine but i have no idea what to get. Any ideas?
https://lh5.googleusercontent.com/-3PenjpvCPzo/AAAAAAAAAAI/AAAAAAAAAIo/nqg8ObclmG0/photo.jpg?sz=64
Depends on what you want, for a street car torque engines are a lot of fun. 383 is always a good bet. 
https://lh4.googleusercontent.com/-xgbitgVwRUI/AAAAAAAAAAI/AAAAAAAAAFM/25pb0FqIhKE/photo.jpg?sz=64
God, that sounds awesome! A true piece of American engeneering. I have no words to express what I feel when I hear that engine! Cheers from Uruguay!
https://lh5.googleusercontent.com/-3PenjpvCPzo/AAAAAAAAAAI/AAAAAAAAAIo/nqg8ObclmG0/photo.jpg?sz=64
Thank you, I'm glad you liked it.  We appreciate you watching! 
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
How old where you when you got the trans am?
https://lh5.googleusercontent.com/-3PenjpvCPzo/AAAAAAAAAAI/AAAAAAAAAIo/nqg8ObclmG0/photo.jpg?sz=64
I had just turned 17 when I got it. 

Episode One Hundred :) Monte SS update

User Comments

https://gp5.googleusercontent.com/-l1sS1KslZPc/AAAAAAAAAAI/AAAAAAAAAAA/5IJmlcM1pxU/s48-c-k-no/photo.jpg?sz=64
You've gone a long way in a short time good job. how's everything going?

69 Road Runner Torqueflite Cheetah Manual Valve Body Testing

OK, so the tranny in my 69 Road Runner was recently overhauled. I haven't had a chance to really drive her due to weather, but Sunday was pretty decent, so I ...

User Comments

https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Hey man great videos as always. Was gonna ask a couple of questions if your ok with answering. I just got my Cheetah Reverse Manual Valve Body in the mail today from Summit Racing. Not sure if I can install it in my 904 Torqueflite this weekend, weather is turning shitty and I don't have a garage lol but I was gonna ask did you drop your tranny when you installed yours? Is it possible to install it without having to drop the transmission and lastly whats up with step 6 when it says you can remove the governor valves? It didn't elaborate. Can you offer any insight? Is it necessary? And if so, is there any way to disable them without having to drop the tranny? Thanks much and keep the videos rolling in, I really enjoy them :)
https://lh4.googleusercontent.com/-1LuiSN4m1fw/AAAAAAAAAAI/AAAAAAAAAIM/chHyEAoUPDo/photo.jpg?sz=64
+Jeremy Knop thanks a lot for the advice. My 70 charger was originally a stick but was changed to a automatic. And since getting a manual transmission cost anywhere from 1200 on up I was thinking could I take my auto trans down take out the parts down to the shell and install this shifter. I say you might as well make the best of it cause I haven't enough money to buy a manual trans. at the moment. Thanks.
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
+Aziz Lamar yeah it goes on an automatic transmission. your gonna want a ratchet shifter most likly, don't need one but it makes it easier. just take the transmission oil pan off, pull the stock valve body out and put the new one in. I actually just jacked my car up about 5", and crawled under andvdid it in about 3 hours. pretty easy install. just browse YouTube for instructional vids, and also get yourself a Haynes manual if you havnt already.
https://lh4.googleusercontent.com/-1LuiSN4m1fw/AAAAAAAAAAI/AAAAAAAAAIM/chHyEAoUPDo/photo.jpg?sz=64
+Aziz Lamar forgot the u sorry
https://lh4.googleusercontent.com/-1LuiSN4m1fw/AAAAAAAAAAI/AAAAAAAAAIM/chHyEAoUPDo/photo.jpg?sz=64
so yo can order this reverse manual valve body from summit? does it suppose to go on a auto trans?
https://lh6.googleusercontent.com/-LoAGwooUdkc/AAAAAAAAAAI/AAAAAAAAABc/nMgXW4s-rsA/photo.jpg?sz=64
Yes, the sign of a beaten man, I know :-(

Throttle Stuck Crash Morro Bay Car Show 2012

Nobody was seriously hurt in this accident.

User Comments

https://lh4.googleusercontent.com/-rPbx7eJfzNc/AAAAAAAAAAI/AAAAAAAAASQ/eKGcibvtSdI/photo.jpg?sz=64
turn off the ignition slam the ebrake stand on the brakes and pray it stops thats all you can do really but he fuckin dodged cars like it was his fuckin job GG old man
https://lh6.googleusercontent.com/-hW4RGh6ZXIw/AAAAAAAAAAI/AAAAAAAAADs/Lpdst15_Wt4/photo.jpg?sz=64
+KSI SubSonic right? One time the throttle on my engine got stuck open while driving and I couldn't decelerate. And I just quickly thought, "well I'll just kill the engine(go to neutral, turn off ignition). It worked. Stopped the car, looked at the throttle body, noticed a small twig got wedged up in their. Talk about potential freak accident.
https://lh4.googleusercontent.com/-hDuxLi8kAqk/AAAAAAAAAAI/AAAAAAAAAGA/1u5zRH4ErCQ/photo.jpg?sz=64
+Phillip Parks well ye that too
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
+Racingkiller43 Gaming why not just put it in neutral tho??
https://lh4.googleusercontent.com/-hDuxLi8kAqk/AAAAAAAAAAI/AAAAAAAAAGA/1u5zRH4ErCQ/photo.jpg?sz=64
in that situation all I can say to do is what you said but keep it in 1st gear, its better to loose a moter than the car itself
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Haha! That's two old pieces of shit off the road. Here's a tip, pop it into neutral. Fkn rednecks. That's why we have America - as a place to keep the Americans.
https://lh6.googleusercontent.com/-_mSRI4slKN8/AAAAAAAAAAI/AAAAAAAAADM/VPBdivKsWHU/photo.jpg?sz=64
+Nathan Prins Because the engine will rev past the redline most likely and blow itself up, which could cost you thousands. Brake assist uses manifold vacuum for power brakes, but at wide open throttle it's normal for an engine to have virtually zero vacuum at all -- so the brake assist will work as well at WOT as it does with the engine 'off' -- to be clear, that means you will have no power brakes except for 'vacuum reserve assist' and that reserve is there no matter if its off or in neutral. As for the steering column lock with the key, you have like 4 modes: LOCK, ACC, ON, START. When driving you have it 'ON', to turn the engine off all you need to do is move it to ACC and the column will not lock up. It only locks in 'LOCK'. And that's only if this hotrod has a locking column, many do not. Many also do not even have power brakes or power steering to begin with because of the light front end and skinny tires makes it easy to turn and manual brake systems look cleaner under the hood of a show car.
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
+Jgizzy -redacted- You're right, but just to be sure why not jam in into neutral? :)
https://lh6.googleusercontent.com/-_mSRI4slKN8/AAAAAAAAAAI/AAAAAAAAADM/VPBdivKsWHU/photo.jpg?sz=64
+Nathan Prins Makes no difference when the front wheels are locked up and the car is going only 25 mph -- it will skid straight to a stop in no time at all.
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
+MyHotRodTV Ron your steering wheel might lock when turning the key... Not smart
https://lh5.googleusercontent.com/-dfWNNLURTxk/AAAAAAAAAAI/AAAAAAAAArM/KYs9i5Gbskg/photo.jpg?sz=64
turn the key off... but when it happens it scares the crap out of you.
https://lh5.googleusercontent.com/-aMg1rGHY57M/AAAAAAAAAAI/AAAAAAAAAKE/1fqHmoHbolg/photo.jpg?sz=64
+Steve Gould Steve Its a good idea to pop it into neutral because when I was on my KTM 65cc dirt bike My throttle got stuck wide open on a supercross track so I had to actullay keep the clutch in the whole time when it got stuck untill I stopped the bike. It was fun (Not)
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
+Magicman9836 Why's that?
https://lh3.googleusercontent.com/-be6kW-JfijA/AAAAAAAAAAI/AAAAAAAAAJc/jp2E7Xh4oCc/photo.jpg?sz=64
+Steve Gould You're bad at trolling.
https://lh6.googleusercontent.com/-335qVoYEj1A/AAAAAAAAAAI/AAAAAAAAAAs/W3nEe3ogLBI/photo.jpg?sz=64
+garret rees You probably could, but it'd do some damage. But yeah, best idea would be to use the clutch... 
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Sorry wasn't thinking. He said pop it in neutral, in the moment I though he meant shift to neutral without clutch, which you can't do at full throttle (at lest in my miata). But yea, if you used clutch it would work!
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
+garret rees Lmao, if you had a manual transmission you'd know that you definitely can pull the car out of gear at full throttle.  Just press the clutch pedal.  And if it's an automatic, just move it into neutral.  
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Lmao, if you had a manual transmission car you would now that you can't just pull the car out of gear when your are full throttle. It just doesn't work with load on the gears. He should have just held in the clutch!
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
eh just look at "modern feminism" and "pro-choice"....Lena Dunham is a great example. She is a "role model" for feminism and pro choice and raped her little sister from the time she was a baby till Lena was 18 and her sister 11. Putting your hands inside your sisters vagina and making her sit on your face while you masturbate is not representative of any self respecting human being. She goes on to write a book about how fun it was to do these things, makes millions off the book and sponsors 'planned parenthood' ....rape is another animal. but killing fetus's because it doesn't fit your lifestyle isn't a choice, its murder. Sorry for the rant!
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
+Robus1022 Yep.  I find it hilarious when dickheads like Robert slam someone with a particular line of argument then use the SAME thing themselves to try to make THEIR point.  Mental pygmy.  
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
+Steve Gould this is becoming the standard on the internet. double speak.
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
+Robert Ruis "The best thing for him to have done would be to turn off the ignition, rather than have the engine screaming at beyond redline RPM's which can bring an explosion and fire to those standing around as spectators.  Once the engine was turned off, he still would have had enough residual vacuum to safely apply the brakes and come to a stop."  "You have incredible advice that no one has ever thought of until the broken filament in your head illuminated, and provided us all with unparalleled wisdom".
https://lh3.googleusercontent.com/-JXzSgV6LIL8/AAAAAAAAAAI/AAAAAAAAAC8/N2e6Qjck9I0/photo.jpg?sz=64
It is very nice of you to make fun at someone's loss and injuries.  And of course you have incredible advice that no one has ever thought of until the broken filament in your head illuminated, and provided us all with unparalleled wisdom.  The best thing for him to have done would be to turn off the ignition, rather than have the engine screaming at beyond redline RPM's which can bring an explosion and fire to those standing around as spectators.  Once the engine was turned off, he still would have had enough residual vacuum to safely apply the brakes and come to a stop.It is sad that you have such an empty spirit as to make light of what happened.  Especially when the description says that there were minor injuries.

Mustang 4.6 GT Cold Air Kit, Exhaust Headers, Throttle Body, Pulley Kit (96-04)

96-04 Mustang GT performance parts overview on BBK performance that includes the unique BBK throttle body intake, performance exhaust headers, cold air ...

User Comments

https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Hey bbk, would a pulley fit a 99 Mercury Grand Marquis 4.6 2v. Also I would like to know what Bbk headers and x-pipe size would go best with it. Thanks
https://gp6.googleusercontent.com/-7h9WVdEZv2I/AAAAAAAAAAI/AAAAAAAAAAA/i0lfqEMINvs/s48-c-k-no/photo.jpg?sz=64
@drewboul86- We haven't tested on that platform to verify for sure, but the results would be the same if the parts bolt up.
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
I live in a state where Cats are required due to emissions. Can I use the stock ones with the new exhaust system?
https://i1.ytimg.com/i/QR2pYGI2KVeowYzBJVu2cQ/1.jpg?sz=64
Bbk throttel body is real good i just go my combo instalred yesturday and i luv it nice soumd performance too
https://i1.ytimg.com/i/VUjtjloXsKzga2djcelQ_w/1.jpg?sz=64
@nsinhold so will all these mods wrh on any 4.6 hence a cvpi or grandmarquis any answers will help thanx
https://gp4.googleusercontent.com/-7r_xzznCUq4/AAAAAAAAAAI/AAAAAAAAAAA/rgoFXmDpaLE/s48-c-k-no/photo.jpg?sz=64
Is BBK a decent aftermarket parts company? Or just another Pep Boys Special in a shiny box?
https://gp6.googleusercontent.com/-QzXDEyKZX3s/AAAAAAAAAAI/AAAAAAAAAAA/kkLBkDGi5bI/s48-c-k-no/photo.jpg?sz=64
Just ordered all the parts from this video & more! Can't wait to install them!
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
This video doesn't lie.... that BBK CAI kills it!
https://i1.ytimg.com/i/MlBxOcMOIKISy0Rn5IwNpA/1.jpg?sz=64
bbk has awesome parts... keep makin em guys..
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Who makes the best headers for 1999s?
https://lh5.googleusercontent.com/-T0QzbLRtGFw/AAAAAAAAAAI/AAAAAAAAABk/imy1JPX2awM/photo.jpg?sz=64
I hate you bbk , nothing fits right 
https://gp5.googleusercontent.com/-Kr7fgXomSxc/AAAAAAAAAAI/AAAAAAAAAAA/8S9tGb5fJxU/s48-c-k-no/photo.jpg?sz=64
So what's the final rwhp on it?!
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Numbers?
Sign up for free to join this conversation on fsaved.com.
Already have an account? Sign in to comment