just bought an '06 CVPI and was wondering how to rewire the spotlight. They
snipped the spotlight wire in half by the handle and when i reconnected it,
it didnt work still. Cant find a wire coming out under the hood near it
either. Am I just not looking hard enough for the hidden wire or could they
have ripped it all out?
Awesome man. Sounds good. I may not be able to reply to it until later
afternoon. I have family coming in from out of town tomorrow.. so after
say.. 11am ET.. I won't be checking my email again until sometime after 6
pm. Just send them to me at: [email protected]
I'll try but before I can.. I need something to reference by. Can you
either make a video and post it to youtube and send me a link? Or can you
take photos and email them to me at: [email protected] so I can see
exactly what you are dealing with?
@Ryan i want turn my spot light but dont know how to hook up my wires, the
wire goes down by the door i dont have a crown vic i have a gmc jimmy..
Please help
that is pretty much a standard electrical connector thing. I don't really
know what its called. I'd say check with Unity or pretty much any hardware
store.
Unscrew the bolt on the handle and remove the handle. Then if there is one
on your model of spotlight, unscrew the bolt on the outside part of the
spotlight. Then pull from the head of the light towards the outside of the
vehicle. Once the light is removed, the bracket will still remain. Unscrew
the plates on the inside and outside of the vehicle with a basic Phillips
head driver and pull out the brackets. It's very simple.
@bluebloodp71 there is a hold down screw/nut on the hand end, loosen that
and carefully slip the handle off, then you have a hold down on the "A"
pillar in the car, remove that and you can carefully slip the spot light
from the light end, do NOT forget your brackets, BUT, adammark2009 is
right, why would you WANT to remove it.
can you post a video on how to mount the spotlight to the vehicle? all you
gotta do is un mount the spotlight and then go through the step by step
process on installing it. Could you please do that?
i disagree its not very simple i have a spot light for my cop car but
cannot dissemble it for the life of me i have had many friends who have
failed as well. can someone help me??
Help!! Just bought a 2009 Tahoe Police package. Neither the spotlight nor
the drivers side low-beam work, coincidence? Or same circuit? Bulbs are
fine. The fuse for low beams lft side is good, swapped the relays as well
and that's not the problem. Any ideas on how to get both working?
Got a 2007 crown vic interceptor. Love the car but I need to take off taht
annoying spotlight. Is there anything specific that you can plug the holes
with after you remove it? I did see where those spotlights are going for
$110 on ebay.