Home » Video » ...

2014 hyundai genesis tsb Videos

2014 Hyundai Genesis Coupe Flemington NJ H140305

FastWorks Tuning System: Genesis Coupe 2.0t Traction Control

Just some video of traction control options. We all know the factory traction control on the Genesis Coupe leaves a lot to be desired so the FastWorks editor ...

User Comments

hackish1 commented on 05 Feb 2014

Sorry about the lack of audio. I just bought the latest version of Sony Movie Studio 13 and it ended up nuking all my original files.

Lance Langdon commented on 18 Jan 2015

Its still good. Ever think if a vid for datalogging would clean up the fastworks forum some be pretty useful:)

Genesis coupe clutch noise on shut down

Makes a racket whenever the car is shutdown with the clutch engaged. Turn the car off with the clutch disengaged and it shuts down quietly.

User Comments

Trancor commented on 27 Jul 2012

I was talking with my dad. He has a tiburon and heard that the way his car is designed for the clutch, that there are a bunch of pins that pull out of the mechanism when the clutch peddle is engaged. So when you let up on the clutch peddle, the pins enter again allowing the car to get in gear. So what I'm thinking (just a hypothesis here!) the genesis is designed the same way, that noise is the engaged pins getting hit my the mechanism, so you don't hear the noise when the clutch peddle down.

Trancor commented on 22 Dec 2011

I have the same issue. My dealership says that is just how it is. But I heard its only on the 2.0T, that if you get any of the sport models you get the sport clutch and it doesn't have that problem (I dunno, I have a 2.0T). Also, you probably hear the gears engage when shift? I've heard a heavier stick can help that problem, or a short throw stick. I've grabbed lower on the stick and hear less movement in the gears after shifting.

doritodude1033 commented on 06 Jun 2012

ive read that its normal but it doesnt sound normal. i think its a noise coming from the flywheel to be more specific but ive noticed if i drive it poorly and dont rev match well and just drive it like a nub, the noise when u turn it off is a lot louder and when i drive it perfectly, or well, the noise is hardly there if at all

gencoupe336 commented on 18 Mar 2012

My genesis does the same thing. Its a yellow 3.8 track. I've been to the dealer 3 times and they cant recreate the noise... even though it is chattering like crazy when I drop it off it takes 30 or more minutes to start back up. I have a video up of the noise.

1CrookedH commented on 23 Apr 2010

@yuge07 Thanks for the info. Unfortunately, even though Hyundai has a TSB for trans fluid change, they said mine was fine. It only started doing it a couple weeks ago. Never made the sound until about 5K miles.

Trancor commented on 15 May 2013

But mine did that since the day I bought it. How could the shaft bearing be going bad with 27 miles on the car when I started driving it? But I'd believe the shaft would stop spinning with the clutch down.

yuge07 commented on 24 Apr 2010

@1CrookedH IDK but thats how i got mine fixed, the the noise was exactly like yours. well it doesnt hurt to try right? you might be surprised. btw dont always trust TSB , use it as a reference.

Cervan commented on 09 May 2013

actually its because the input shaft bearing is going bad and when you push the clutch in the transmission input shaft stops spinning.

Farley H commented on 12 Aug 2010

you clutch or flywheel or tranny could be the problem. you should get it checked out at the dealership or go on the genesis forums

yuge07 commented on 23 Apr 2010

its nothing big....i had that noise on my 05 G35 6mt as well just change the transmission oil and clutch oil you will be fine HTH

Matthew Montana commented on 07 Feb 2016

I have the same problem with my 2013 2.0t rspec and dealer are given me shit!! 100% throw out bearing going?

John Williamson commented on 27 Jul 2012

my 3.8 does this as wheel and 2nd gear is really clunky and 5 has locked me out once or twice

ShepherdsWrench commented on 10 May 2011

@juanlozanoism gen coupes have had a lot of issues. nobody is making stuff up.

Danny Denihan Jr commented on 05 Jan 2015

My 2013 does that same shit

ShepherdsWrench commented on 21 Jul 2011

@jxtsful i believe you.

2013 genesis coupe wastegate rattle 2.0t

Bone stock, 2013 genesis coupe 2.0t wastegate rattle. The end is where its most notable. Happens when the car is both warm and cold - it's worse when it's cold.