+Cycle Gear Hi, it's not a specific point on the cover, mostly over thr top length of bike. I remove it ans it is moist and wet after a night of rain. i usually have to wipe it down with a chamois.
Yes the rear will work on your Liberty, you just need to confirm the axles.
The front should be a Dana 30a and the rear should be a Chrysler 8.25". For
the rear axle, I cannot 100% confirm the bolt pattern on the diff as
matching the axle in the front of your Liberty as we have not tried to
install a diff cover on a Liberty here. You may need to do a little
research on the front diff, but the rear should be an 8.25" and will work
fine. Let us know if you have any further questions. Thanks!
The G2 Differential Covers include 5/16 x 18 bolts that are specifically
included to address the additional thickness of the cover. This will fit
your Rubicon Unlimited's axle without issue. Please let us know if you have
any other questions. Thanks.