China express durham Videos

+GamingRacerHD I

+Savaad Blake This is on the London To Brighton Line.

ik ;(

+TheGamingTiger You don't realise how much I want to do this as its my home route but it isn't available yet as a route :(

+John Holloway The London To Brighton route is fully electrified so no need for overhead wires but this train does have overhead wires on the route that it does normally runs on which is on the West Coast Mainline Euston - Glasgow

+John Holloway I will keep that in mind with future video's :D, and yea they really need to fix the passengers :D

+Trainspotter Blake =)

?

hehe =)

Ty :D

There are basic controls and expert ones, tbh I don't know the difference :D Its a pretty easy game once you driven a few different trains :D

+Maureen Jerome Yes, he was absolutely trying to rip you off. There is no other way to justify such an exorbitant price. Replacing a contractor is a 15-minute job. Even if he paid $25 for the contractor, marked it up to $50, and then charged you $100 per hour of labour, it wouldn't come anywhere near $275.Unscrupulous air conditioner repairmen don't like to talk about prices because they want to keep customers clueless so they can get away with ripping them off. Kudos to you for doing your due diligence and looking up the price! If more people did this, the scam artists would run out of victims and give up.Don't fall for warranty pitches. The reality is warranties on air conditioner parts are next to worthless. The cost of most parts is pretty insignificant compared to labour costs, and the parts will almost always outlive a repairman's short labour warranty. Getting a free $50 part isn't much help when they try to charge you $200+ in labour.If a repairman will only do work on a so called "flat rate" basis, run away as fast as you can. This kind of pricing scheme means they don't itemize parts and labour costs. They look up a single price from a list (or simply make one up) to obfuscate the fact they are charging more per hour than a neurosurgeon. Flat rate prices are often equivalent to marking up parts 5x and charging $500 per hour in labour. Outrageous!

+Maureen Jerome well i don't really talk about price. however the contactors i use are not $10 i use american made high quality parts that have good a warranty.i never use home depot parts because they aren't up to my standards i have to warranty my work for several years, that's why i have to know that the part i am using will last. every area has a different cost of living and every business has a different overhead so prices will very from place to place and even from co to company.

+yitzchok gottesman your correct

+John McMullan I had the same question. I'm guessing that as long as the 24 volts runs through from one side to the other of the contactor, it will be energized and pull in.

+John McMullan it will still work perfectly because it is a simple electro magnet the as long as you have a common and 24 volt supply it will work good question thanks for watching

+Monster Mark that is for the reversing valve this is a heat pump if you have a strait ac it will only have a common and a 24 volt

+Jeff Byer I am glad it helped you thanks for watching

your correct i should have said wiring diagram it is a 1 pole solid and one pole is broken by the contactor the manufacture calls it a 1.5 pole contactor