Get flywheel Videos

• 1. Get some smooooth! - Konova Nitsan FLYWHEEL review!
• 2. Husqvarna 395XP Chainsaw Rebuild Part 3 - Trying to Get the Clutch and Flywheel Off
• 3. Chainsaw flywheel removal on a old chainsaw without a flywheel puller..
• 4. Nerf which should I get flywheel comparison 1
• 5. How to Fix a Garbage Disposal: Stuck Flywheel
• 6. WordPress Weekly Episode 118 - Hey Get Flywheel
• 7. Review: Full Metal Nerf Flywheel Cage
• 8. How To Remove Honda XL100 XR100 Flywheel - XL100S Dirtbike
• 9. Get Your Flywheel Moving!

Get some smooooth! - Konova Nitsan FLYWHEEL review!

User Comments

JHubnerProductions commented on 11 Jul 2015

Hi. Just a one question, is it better to buy this flywheel or konova crank and do it diy ? thanks :)

Nitsan Simantov commented on 11 Jul 2015

The ready made flywheel is much better.

Anthony Broun (BrounVisuals) commented on 07 Jun 2015

Thinking about buying the Shark Slider... Is it the 200$ more worth it ? 

Anthony Broun (BrounVisuals) commented on 11 Jun 2015

+Nitsan Simantov Ok cool. Thank you man apreciate a lot Ps. sorry bad English, i´m from Denmark

Nitsan Simantov commented on 11 Jun 2015

+Anthon Brouneus Just a normal strong tripod, plus an arm from Konova for support on one side of the slider. (It goes from the leg of the tripod to the edge of the slider.) In my review you can see that done with a manfrotto arm, but that's more expensive and heavier.

Anthony Broun (BrounVisuals) commented on 11 Jun 2015

What kind of tripod would you need to hold up the extensions then ?

Nitsan Simantov commented on 11 Jun 2015

yes. it's the smoothest slider I've used. it gave me by far the best results.

Kunstlied Mélodie commented on 04 Jun 2015

wow...very well done! just a question: is it more noisy ? i need it to film classical concert....I habe already the k2, but it s not enough smooth....Thank you for your help!

Kunstlied Mélodie commented on 20 Sep 2015

Thx u very much! I buy it, nd no it s Not very noisyyy:)) i record with an extern solution , not with the cam ! Thx for your help !

John McConnell commented on 20 Sep 2015

+Kunstlied Mélodie why not record your audio off camera to be safe?

Nitsan Simantov commented on 11 Jun 2015

it's not very noisy.

IUSECAMERAS commented on 25 May 2015

good stuff dude!

Nitsan Simantov commented on 28 May 2015

thanks!

Tom Bird commented on 21 May 2015

where would I find the belt ?

silvertrigga commented on 07 Sep 2015

+Tom Bird That is what is annoying about Konova... I bought the smart pan and tilt bundle and realized it didn't come with the slider... then I bought the K7 slider and realized it didn't come with the belt... had to buy the crank handle to get the belt which is $200 more dollars. Now it may have been my fault for not reading but Konova should include the belt with either one of those purchases. plus I don't know when it will arrive because if you order from the Konova website you don't get a tracking number.

Nitsan Simantov commented on 21 May 2015

+Tom Bird scroll down the list and find one that includes the belt.

Tom Bird commented on 21 May 2015

ok, it says it doesnt come with the belt though.

Nitsan Simantov commented on 21 May 2015

it's a complete kit that connects to your slider. there's links in the description.

Husqvarna 395XP Chainsaw Rebuild Part 3 - Trying to Get the Clutch and Flywheel Off

User Comments

highcountrytimber commented on 12 Jul 2015

A good impact gun will pop the clutch right off.

RDAllen commented on 12 Jul 2015

+highcountrytimber I hadn't thought of that, I'll have to remember that for the future.

Sergiu 09 commented on 01 Jul 2015

I dont like what i am seeing here, you just broke the key on the flywheel, you will need a new flywheel, and the clucth doesnt come off that way its a reverse thread so to loosen the clucth you will need to go clockwise

RDAllen commented on 02 Jul 2015

+Sergiu 09 I'm not sure the flywheel actually broke at this point, I think it might have actually broke at an earlier date, I looked closer at the shaft after the video and it had score lines on it, like the flywheel had spun on it.

Chainsaw flywheel removal on a old chainsaw without a flywheel puller..

User Comments

ray sylvester commented on 25 Feb 2015

Cheers mate. Been prying and pulling on that flywheel for half an hour. A bit of penetrating oil and one whack on the shaft and it popped right off.

Rat Sleds (Ratsleds) commented on 16 Oct 2015

+ray sylvester Glad that helped

Log Splitta commented on 19 Dec 2014

On the Stihl 028 the nut loosens counter-clockwise. 

Rat Sleds (Ratsleds) commented on 16 Oct 2015

+Log Splitta thanks for the advise good to remeber@!

Nerf which should I get flywheel comparison 1

How to Fix a Garbage Disposal: Stuck Flywheel

User Comments

My Duncan and Me commented on 05 Jan 2015

Whatever is lodged is pretty big and won't come out. What's the next step?

Miister Josh commented on 21 Feb 2015

I ended up taking a wooden rod and prying it loose. It worked. 

My Duncan and Me commented on 18 Feb 2015

I just kept turning, the piece that was lodged didn't come out for a while but the disposal worked anyways with it under the plate anyways. I think it's gone now though, I don't hear anything making a noise anymore. I really needed that piece though :( was a plastic tab for my vent hood above my stove that was used to hold the filter on. :(

Miister Josh commented on 18 Feb 2015

+Elizabeth Pritchett What was the next step lol. I cant feel anything jammed but its stuck and won't turn.

My Duncan and Me commented on 05 Jan 2015

Never mind, got it

thomas dunnavant commented on 23 Dec 2014

I watched the video and found you have some critical issues other than the disposal to check. The romex connector that will protect the wire that enters the disposal is missing and this is a common cause for house fires and shocks. The connector is less than $2 but more importantly, the load center you show in the video is an old Federal Pacific Stab Lok panel that is known to have dis-similar metals inside the breakers and there are MANY warnings out there concerning these panels. Please do your self a favor and check into these issues. 

Jeanes Hopper1 commented on 24 Jan 2015

Read full Reviews about Waste King Garbage Disposal and get the best price here amzn.to/1L5PtuA Click to view now !!! Discount 59% when buy it here !!!

Chris Zinger commented on 28 Dec 2014

Really.... this video is showing what is necessary

WordPress Weekly Episode 118 - Hey Get Flywheel

Review: Full Metal Nerf Flywheel Cage

User Comments

Joe Chen commented on 01 Dec 2015

Do you have to use lipos and powerful motors? Couldn't you use something like Rm2s and ultrafires？

Joe Chen commented on 05 Dec 2015

Rhinos do require shell modification in a rapidstrike, I didn't say other blasters. Don't believe me watch MTB's rapidstrike mod tutorial. They use falcons but the are nearly the same.

Mina Darsh commented on 01 Dec 2015

Rhino's don't require shell modification, and really, it costs more, but Li-Po's are worth it, performance will be better and generally more reliable.

Joe Chen commented on 01 Dec 2015

I also don't like lipo's only because of the initial investment like you mentioned in your battery guide.

Joe Chen commented on 01 Dec 2015

Thanks guys but Mina they DO require shell modification in a rapidstrike.

Mina Darsh commented on 01 Dec 2015

+Joe Chen Like Bobololo said, Li-Po's, they deliver the Amps you need! Also, you might want to check into the MTB Rhino's which are a project that is running succesfully by Make Test Battle. They actually managed to bring a good performing 3S 130 size motor on the market that's well distributed. A major plus I find is that they don't require shell cutting since they're 130 size.

IAmBobololo commented on 01 Dec 2015

+Joe Chen If you are using RM2s, please stop doing so. They're very fragile motors and not good for this hobby. Carbon brushed stock motors are a better choice than RM2s.They also don't have the torque for use in this flywheel cage. Ultrafires can work... but not well. For best performance, LiPo is the way to go with this.

DEATH04066 commented on 16 Nov 2015

Will this fit in a Rayven?

Mina Darsh commented on 01 Dec 2015

+DEATH04066 You can order them for a Stryfe and Rapidstrike, DrSnikkas also said in a mail to me that he is working on a version for the Rayven.

DEATH04066 commented on 17 Nov 2015

+IAmBobololo ok, thanks! :)

IAmBobololo commented on 17 Nov 2015

+DEATH04066 This one only fits the Rapidstrike.

megaman616 commented on 13 Nov 2015

If you put some texture on the stock flywheels, would they work better?, like a rough sanding

Dapstart Animations commented on 03 Dec 2015

+megaman616 Yes. An even better alternative is the resin people use for violin bows.

Meep255 commented on 07 Nov 2015

Im newer to nerf modding whats better for a rapidstrike Falcon Motors or 180s?

IAmBobololo commented on 07 Nov 2015

+Meep255 Depends on what battery you're using and whether or not you mind cutting the shell to accommodate the motors.Falcons/MTB Rhinos perform optimally on a 3S LiPo while 180s do well with a 2S.180s will an opening in the shell around the motor cage so they will fit.

billna billy commented on 18 Oct 2015

can someone link to a guide to installing a lipo into a stryfe?

billna billy commented on 19 Oct 2015

+IAmBobololo Thanks! Your super helpful!

IAmBobololo commented on 19 Oct 2015

+billna billy MakeTestBattle has a video.

How To Remove Honda XL100 XR100 Flywheel - XL100S Dirtbike

User Comments

DaGingaNinja commented on 10 Nov 2014

What was the tool that you used to take off the stator with called?

SamCycleNS commented on 16 Nov 2014

+DaGingaNinja I think you might be thinking of the impact driver

Get Your Flywheel Moving!