Where to buy zkw headlights Videos

+Norbii Iy not really sure what your question is?

+Oida Hawi yes they are slightly smaller, it's a more recent design of reflector (Audi Q5 reflector), so more efficient. I would say it's equal to new (not burned) ZKW projectors in light output.

+Retrofitlab  I was looking at the price difference between the lenses and the projector you suggested, and it seems like getting the projectors is a better deal, even though I don't need them, it doesn't hurt having an extra pair haha.Got a couple questions though.1 - Is it a direct fit? I don't need shrouds, rings, none of that, right? Just take mine out and put that one in? Since I have BOSCH headlights and those are BOSCH style projectors it's probably a direct fit, but I'm not sure...2 - Do I need to do something in order to get Bi-Xenon functionality since mine doesn't have it from the factory? Mine currently only does low beam I would assume there has to be something I need in order to control the ''reflector''.Thanks in advance! ;)

+Pedro Then you need the ZKW lenses indeed :) Welcome!

+Retrofitlab what I'm really chasing is clarity.. gotta love those cutoffs though! haha thanks for the help! :)

+Pedro I guess you are lucky then :) You will only need the ZKW lenses then indeed to get a super sharp cutoff :)

+Retrofitlab Because of the "chrome" reflector, right? Surprisingly, mine are like new :o maybe somebody replaced them?

+Pedro Yes that's the thing, nobody would recognize it, and the light output is perfect so it will not give any problems.The ZKW lenses fit directly indeed, but I would recommend to take complete new E46 projectors, they have clear lenses installed already. https://www.retrofitlab.com/en/xenon-projectors-1/bosch-e46-bi-xenon-projectors-1.html

+Retrofitlab that's the thing though. even though it's legal if you have the ZKWs (my car has BOSCH) you can't legally retrofit ZKWs for example or make any mods to the existing lights so they work like ZKWs. It probably sounds a bit ridiculous.. Nobody would ever know I switched them though.. unless I got stopped by a BMW nerd cop haha thanks for the help anyways! I definitely plan on buying some stuff from you guys!Oh, btw, since we're already going back and forward.. can you tell me if the clear ZKW lenses you guys sell fit on the BOSCH projectors without modifying them?

+Pedro Since Portugal is EU, it's legal. If you have the ZKW headlights on your E46, it already works that way from factory :)

I'm from Portugal so it will probably work, but it's likely to be illegal, like everything else in this moronic country. My 7 series works like that though but I'm guessing the police aren't willing to stop a 7 series and moan about it having an extra high beam haha

+Pedro That depends on which country you are from. If your car is from USA or canada, it will not (not legal there). In European countries it will work that way indeed.

+Retrofitlab do the splitters work in a way so that you'll have two high beams? Xenon + halogen?

+Oscar Villalobos the link is in the description, but here you are: https://www.retrofitlab.com/bmw-3-e46-zkw-oem-md2s-1.html

Hey man, great video. I've been watching it step by step as I disassemble my lights. I have ZKW lights, but using your video to do the burnt bowl replacement... Anyway, I'm having a hell of a time getting the auto leveling arm popped out of the hinge (4:23 in your video)... Can you shoot me a message or reply with more detail on how hard it is? Did you pop it up to the top or bottom of the hinge? I don't want to break anything! Thanks in advance! Your video is great!

Question: Do your inner halogen's turn on with the brights? I have a the same set up as you. Halogen on the inside, Bi-xenon's on the outside. The only time my inner halogens turn on is when I pull my turn signal stalk toward me for the "flash to pass" mode. When I push it to bright light mode, only the bi-xenons go to bright. The inner halogens don't come on then. Seems like a waste of space and engineering to use them for "flash to pass" only. Thoughts?

Hi Xion, please help me a bit. I bought a car that had an accident and my xenon headlight casing have almost all the clips broken. The headlights are fit with screws and metal clips so they work but I would like to have my car neat so the question is is is possible to buy cheap second hand normal headlights and replace the interior with my stuff, are the xenon and normal headlight casings the same?

goodshit bro. this helped me out lol but when putting taking the motor off, i noticed it was easier to do it BEFORE you twist the headlight knob. less tension on the motor rod. then to put it back i just took out that cover, and popped the white clip off, and clipped it back in. took no longer then 5 seconds.

i have a 2003 330i with out a projector light in the headlight compartment, its just your basic two light bulbs. my question is can i just swap it out with original BMW headlight that come with the projectors, is there any harness needed to be swapped or is it just plug and play? thanks

@dmirocha Whats up. The high beam lights are only on if the DRL feature if on from factory. I have mine disabled, but when I pull back on the stalk they work as flash to pass. If I press forward I have my bi-xenon high beam.

I still can't figure out if mine is AL or ZKW. I am fairly certain it is AL but it is also NON bixenon its single xenon with no little motor below the projector and divider. under the shroud.

Well yea that's what I was getting at. Oh btw I just did this and I think I blew up my adjuster motors when I disengaged them from the bowl, now they make a clicking noise. Think I broke them?

is vht nightshades safe to spray inside the headlamp? i know it is flammable but dont know if it would combust after dried. thanks in advance knowledge bearing viewers.

I have one pair mint condition zkw projector bowls for sale.you can replace your burnt bowls without any modification.please contact me if you are interesting!

Thanks a whole lot for this, i changed my hid igniter using this video. would not have been able to do it otherwise. Awesome work and great effort!

Look at ecs tuning, they should sell a headlight clip repair kit. If not get a set of used halogen lights and transfer over the xenon parts

ZKW projectors bowls burn out no matter what. There was never an update for them. Only thing you can do to stay OEM is get AL projectors.

+Beko Yes we sure have, it's the EvoX-R that will easily replace the original Hella projector. You will not even need to open your headlight. https://www.retrofitlab.com/en/xenon-projectors/hella-evox-r-bi-xenon-projectors-1.html

+Jey Galiza do you have the halogen headlights? Then we recommend our E46 MH1 kit. If you have already xenon headlights, it depends on if you have AL (single xenon or bi-xenon) or ZKW headlights!

+龙飞 sorry, not interested.

that really did help, will you make a product review about led or car cameras, if you like doing this, i can ship you the product for free, or money as payback.

+Disphonic x that's right, but new shrouds do not exist with the Word xenon, as far as I know of. The little tabs on the back of the shrouds are different, that's why the only way is to glue them. You could use JB weld for example. That's strong enough but will still alow you to remove it without cracking it.

+Retrofitlab Thank you but it doesn't have the words "Xenon" printed on them. My projector is 3" also. Do you know where I can find them? Also another question, mine don't glue on like these? I can snap on them on with my xenon ones and they stay via little notch on top of projector. Why can't I snap this one on and have to use superglue? I won't be able to ever remove it if I put super glue on therefore I can never replace my actual projector (without removing the without the entire reflector), unless I crack this shroud off. Just doesn't make sense to me.

+龙飞 check out the link in the description :)

that is real good,  where did you got this , i am very interest in this  

+ayman ismail Thanks! The angel eyes we have them seperate, here's the video: https://youtu.be/ppwku27DT1ghttps://www.retrofitlab.com/en/accessories/bmw-3-e46-led-angel-eyes-1.htmlThese can be mounted on this AL Bi-xenon headlights.

@HmoobNatural A guy who was selling them online after a dealership in china (where they sell the 2006-2008 TL with these headlights) was a victim to hail damage. I lucked out :)

Please excuse me sir Mr Gerzand but I would like to purchase these for 1000 American doll hairs. Please contact me on AIM. VERY NICE

CDMs bring that cut off or r they ZKW projectors? wow if its CDM... lookin sik tho bro

I'm looking for clear Acura tl headlights. Where did u get urs?

where'd you get them head lights?