Enter your query, example: how not cry when slicing onion or how to enter an Free Italian Sex Webcams?
Home » Video » ...

China grove pier Videos

Fun Kooky Surfing at Cherry Grove Pier on September 1, 2014

We had a camera and a few of us were surfing. We had fun and even filmed some of it. Of course, we were unable to record our best surfing such as our 360's ...

User Comments

https://lh5.googleusercontent.com/-FcDc77_EhFc/AAAAAAAAAAI/AAAAAAAABv0/xj5MmC9M0j0/photo.jpg?sz=64
SenorPescador Johnson commented on 03 Sep 2014
nice little sets too much fun
https://lh6.googleusercontent.com/-Wnf4YFey_y4/AAAAAAAAAAI/AAAAAAAAAF8/ojrBrPkAQ00/photo.jpg?sz=64
CherryGrove BombSquad commented on 03 Sep 2014
Thanks for viewing!

OCEAN GROVE, NJ - BEACH VIEW FROM PIER - New Jersey Shore Travel

View of the beach at Ocean Grove, NJ (from the north side of the pier) on a hot and crowded day in August 2015. Filmed with my Sony HDR-PJ380 video camera ...

Firework gone wrong in Clearwater Beach pier 60 (19 shot cake Coconut Grove)

We underestimated this 19 shot cake-firework. It knocked itself over with the force of it's own blasts, with still about half the shots to go, it started shooting the ...

User Comments

https://lh5.googleusercontent.com/-HooQEy0Acqw/AAAAAAAAAAI/AAAAAAAAAFY/10mPkMn2IFI/photo.jpg?sz=64
hotsaucejd commented on 31 Jan 2014
that's awesome

Solarplate Etching Process

Here is the Solarplate Etching Process of a Tracey James photo of the Ocean Grove Pier during Hurricane Irene. The Pier is no longer standing and was ...

User Comments

https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
lcireland7 commented on 14 Apr 2015
Thank you so much for the video. In the beginning you mentioned that you manipulated the photo to turn it into a drawing. Can you explain more about this process? Thanks again, Linda
https://lh3.googleusercontent.com/-AWKaOy6va-Q/AAAAAAAAAAI/AAAAAAAAAAw/8LyWBUf8M5E/photo.jpg?sz=64
alitlcrzyart commented on 20 Apr 2015
+lcireland7 You can edit the photo inside Adobe Photoshop. You can change it into a drawing and then alter it until you are happy with the appearance.
https://lh3.googleusercontent.com/-dTZGwLuZP9M/AAAAAAAAAAI/AAAAAAAAAFE/sBd1gynvtNQ/photo.jpg?sz=64
David Anon commented on 01 Apr 2015
I have a Chauvet DJ Shadow UV light, I think it's 12 watts..Will that be sufficient enough to expose the plate as you have done here? If not, what kind of light are you using?
https://lh3.googleusercontent.com/-dTZGwLuZP9M/AAAAAAAAAAI/AAAAAAAAAFE/sBd1gynvtNQ/photo.jpg?sz=64
David Anon commented on 20 Jul 2015
+alitlcrzyart Ohhhh. I totally thought you put the image transparency down on the plate again for the 5 minute final burn but now that I watch your video again you just burn the plate by itself! Gotttt it! & one final question (i promise last one this time!) There's another solar plate vid below yours by ExtraordinaryEugene who said the grooves are "hairline" thin. Is there a way u can manipulate the depth of the lines with the light? Like if you wanted a shallow or a deeper depth in your grooves? If so, how?
https://lh3.googleusercontent.com/-AWKaOy6va-Q/AAAAAAAAAAI/AAAAAAAAAAw/8LyWBUf8M5E/photo.jpg?sz=64
alitlcrzyart commented on 20 Jul 2015
You will burn the screen first on the plate without the image.  You remove the screen and then burn the image onto the plate. the screen and the image should not be burned at the same time.  I hope that helps.  
https://lh3.googleusercontent.com/-dTZGwLuZP9M/AAAAAAAAAAI/AAAAAAAAAFE/sBd1gynvtNQ/photo.jpg?sz=64
David Anon commented on 20 Jul 2015
+alitlcrzyart Hi again crzyart! Trying this for my first time soon but one other thing I don't understand is how does the image get burned properly aligned if you're exposing it two times? The 1st time for 1:30 & the 2nd time for 3-5 mins? No human could perfectly align the image sheet onto the plate exactly the same again the second time around, can they? Doesn't that affect the line grooves if the transparency is placed a tad bit off each time?
https://lh3.googleusercontent.com/-dTZGwLuZP9M/AAAAAAAAAAI/AAAAAAAAAFE/sBd1gynvtNQ/photo.jpg?sz=64
David Anon commented on 21 May 2015
+alitlcrzyart That does help, thanks so much for all your insights & quick replies! Keep up the great artwork!
https://lh3.googleusercontent.com/-AWKaOy6va-Q/AAAAAAAAAAI/AAAAAAAAAAw/8LyWBUf8M5E/photo.jpg?sz=64
alitlcrzyart commented on 20 May 2015
My setting is at 11.  I have two blankets on top of my plate.  One thin and one thicker.  I hope that helps.
https://lh3.googleusercontent.com/-dTZGwLuZP9M/AAAAAAAAAAI/AAAAAAAAAFE/sBd1gynvtNQ/photo.jpg?sz=64
David Anon commented on 18 May 2015
+alitlcrzyart one last question for you if that ok. I am wondering what setting you use on ur press when sliding plate through? on the side of mine, it goes from 0 to 30
https://lh3.googleusercontent.com/-AWKaOy6va-Q/AAAAAAAAAAI/AAAAAAAAAAw/8LyWBUf8M5E/photo.jpg?sz=64
alitlcrzyart commented on 22 Apr 2015
I have Nova T5 15 watt bulbs.You will have to test the exposure time with any of the bulbs.  
https://lh3.googleusercontent.com/-dTZGwLuZP9M/AAAAAAAAAAI/AAAAAAAAAFE/sBd1gynvtNQ/photo.jpg?sz=64
David Anon commented on 21 Apr 2015
+alitlcrzyart Ok great :) Do you know how many watts your face tanner light uses? I am wondering if higher wattage might do better job or not?
https://lh3.googleusercontent.com/-AWKaOy6va-Q/AAAAAAAAAAI/AAAAAAAAAAw/8LyWBUf8M5E/photo.jpg?sz=64
alitlcrzyart commented on 20 Apr 2015
+Corey Herron that should be ok. I am using a face tanner with face tanner bulbs that I found on eBay.
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Ronnie Larr commented on 30 Oct 2014
Thank you for taking the time to write back! Yes, I just got an order in from them of 8x10's. it's the only size they have available right now, until the new arrivals in December. Can't wait to start transferring some of my old drawings to plates!!! Take care....
https://lh3.googleusercontent.com/-AWKaOy6va-Q/AAAAAAAAAAI/AAAAAAAAAAw/8LyWBUf8M5E/photo.jpg?sz=64
alitlcrzyart commented on 30 Oct 2014
That's very exciting.  Good luck with everything!  
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Ronnie Larr commented on 28 Oct 2014
Nice work! Pulling out all my etching equipment from the attic and going to give this a try!!! I have what is probably a dumb question and need some advice with the light box configurations for the larger plate processing. Q. Is this process possible do to the special Solarplate orange coating? or can it also be done with zinc, copper and or aluminum plates? I do larger plates like 16x20 sometimes. I have one of those face tanning light boxes 75 watts. It is obvious that this small box will not cover those larger plates. So, I was thinking of building a box that will elevate the light box an additional 10"-12" and adding an additional wooden skirt in a widening angle underneath to cover more light area coverage and increasing the light exposure to the plate by 40% do to the new larger distance between the lamps and the plate. What do you think??? Thanks again for the tutorial!!!
https://lh3.googleusercontent.com/-AWKaOy6va-Q/AAAAAAAAAAI/AAAAAAAAAAw/8LyWBUf8M5E/photo.jpg?sz=64
alitlcrzyart commented on 29 Oct 2014
Hi RonnieI have only used the Orange plates with the light box.  These plates have been discontinued and the new ones are now being tested by Dan Welden. Here is his site with more info //www.solarplate.com.  You can hold the lighbox and slowly move it across the larger plate for an even exposure.  For anything really big you can try your idea. That may work out fine.  It can't hurt to try everything to see what works best.  Good luck!

Kiln Pier Shot

Demolition of Cement Kiln and Piers.

GROVE STREET AL PODER!! | GTA V ONLINE RACE | Flow

Juegos baratos: https://www.instant-gaming.com/es/?igr=Flowstreet Canal secundario: https://www.youtube.com/channel/UCLQ-OlX6EiyRcxVFDqklddA Gana ...

User Comments

https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Carlos 777 commented on 07 Sep 2015
Das asco flow nö tires Ninas ni C4 supnormal hijo de puta
https://lh5.googleusercontent.com/-KHKO2K39OKs/AAAAAAAAAAI/AAAAAAAAACA/ypnZ8tVbgCQ/photo.jpg?sz=64
tristan castillo commented on 10 Sep 2015
+Carlos 777 se dice subnormal estimado usuario de youtube
https://lh6.googleusercontent.com/-C5BvhVkYekw/AAAAAAAAAAI/AAAAAAAAACM/PCALOnNJpLQ/photo.jpg?sz=64
PoLLo149 commented on 01 Sep 2015
Al parecer alguien no se ha dado cuenta que el Turn down for what no se usa en cualquier """"chiste"""" sin sentido que se diga xD ah y encima hacer mal el sonido :'v
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
TheManu1160 commented on 17 Jan 2016
+ELMATADERO PRO tu mami? :v
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Mauro Centurion commented on 15 Jan 2016
+ELMATADERO PRO por que no llamas mejor a tu mami
https://lh6.googleusercontent.com/-wDUgaJ3Z_3M/AAAAAAAAAAI/AAAAAAAAAeo/MQ1MGNmbV34/photo.jpg?sz=64
Danny Raimondi™ commented on 02 Sep 2015
yo a mi mami
https://lh4.googleusercontent.com/-chw1SIqSplM/AAAAAAAAAAI/AAAAAAAAABg/XW0BmgDRa5o/photo.jpg?sz=64
ELMATADERO PRO commented on 02 Sep 2015
dejenme en paz o llamo a la mafia
https://lh4.googleusercontent.com/-chw1SIqSplM/AAAAAAAAAAI/AAAAAAAAABg/XW0BmgDRa5o/photo.jpg?sz=64
ELMATADERO PRO commented on 02 Sep 2015
+PoLLo149 lo que eres tu
https://lh4.googleusercontent.com/-chw1SIqSplM/AAAAAAAAAAI/AAAAAAAAABg/XW0BmgDRa5o/photo.jpg?sz=64
ELMATADERO PRO commented on 02 Sep 2015
en el que sale
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
joel muiño commented on 02 Sep 2015
En que minuto ?
https://lh6.googleusercontent.com/-wDUgaJ3Z_3M/AAAAAAAAAAI/AAAAAAAAAeo/MQ1MGNmbV34/photo.jpg?sz=64
Danny Raimondi™ commented on 02 Sep 2015
+PoLLo149 tur doun for wat xD
https://lh6.googleusercontent.com/-C5BvhVkYekw/AAAAAAAAAAI/AAAAAAAAACM/PCALOnNJpLQ/photo.jpg?sz=64
PoLLo149 commented on 02 Sep 2015
+ELMATADERO PRO Déjame adivinar, no, no adivinar, lo puedo aclarar perfectamente, eres de esos que para todo dicen "niño rata" "fanboy" pero lo PEOR es que me lo dice alguien que tiene la palabra "pro" en su nombre y una foto de MINECRAFT.Ve y haz algo interesante de tu vida.
https://lh4.googleusercontent.com/-chw1SIqSplM/AAAAAAAAAAI/AAAAAAAAABg/XW0BmgDRa5o/photo.jpg?sz=64
ELMATADERO PRO commented on 02 Sep 2015
Rata
https://lh6.googleusercontent.com/-2gJk-ukSGbo/AAAAAAAAAAI/AAAAAAAAABc/3T9S4MP-tsY/photo.jpg?sz=64
Salvador Rancho commented on 01 Sep 2015
esa carrera la subió ayer dani rep
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Damian Alexis Jara Castro commented on 30 Sep 2015
mal porti que bes a ese king of rata
https://lh4.googleusercontent.com/-D5kNG9X6dS8/AAAAAAAAAAI/AAAAAAAAACE/bikTMNqFhXU/photo.jpg?sz=64
Sr. pringles :3 commented on 02 Sep 2015
+Xxx Xxx Marion yo? claro si lo que tu digas (por si sos bruto es SARCASMO)
https://lh4.googleusercontent.com/-X4mIyQYsOV8/AAAAAAAAAAI/AAAAAAAAAJ8/ja1cRkXT0YY/photo.jpg?sz=64
Ckarlos CkA0S commented on 02 Sep 2015
+Stay Here entonces tu eres un fideo crudo, sin ofender
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Xxx Xxx commented on 02 Sep 2015
callate maricon
https://lh4.googleusercontent.com/-D5kNG9X6dS8/AAAAAAAAAAI/AAAAAAAAACE/bikTMNqFhXU/photo.jpg?sz=64
Sr. pringles :3 commented on 02 Sep 2015
yo preferiría ser gordo a flaco... auque estoy bien para mi edad (/x.x*)
https://lh6.googleusercontent.com/-2gJk-ukSGbo/AAAAAAAAAAI/AAAAAAAAABc/3T9S4MP-tsY/photo.jpg?sz=64
Salvador Rancho commented on 01 Sep 2015
+Stay Here que no pienso seguirte el royo
https://lh6.googleusercontent.com/-2gJk-ukSGbo/AAAAAAAAAAI/AAAAAAAAABc/3T9S4MP-tsY/photo.jpg?sz=64
Salvador Rancho commented on 01 Sep 2015
+Stay Here no pienso seguirte el royo ok?
https://lh4.googleusercontent.com/-D5kNG9X6dS8/AAAAAAAAAAI/AAAAAAAAACE/bikTMNqFhXU/photo.jpg?sz=64
Sr. pringles :3 commented on 01 Sep 2015
+Stay Here porque insultas que te hizo el?
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Saad Eddine Jouahri commented on 01 Sep 2015
es verdad

Hurricane-battered New Jersey pier goes up in flames

A stretch of boardwalk in New Jersey was destroyed by a massive blaze on Thursday, nearly a year after the area was devastated by Hurricane Sandy.Duration: ...

Didn't Just Die Died and Rose Lyrics Video

My first time I did a video of 2 seperate songs for 1 Video. ApologetiX parody of "Live and Let Die (By Sir Paul McCaryney) and China Grove (By The Doobie ...

User Comments

https://gp4.googleusercontent.com/-z4BjY20p-jE/AAAAAAAAAAI/AAAAAAAAAAA/FH17QQ2svC4/s48-c-k-no/photo.jpg?sz=64
luispachon007 commented on 08 Oct 2009
Didn't just die, almost convinced me to be back to christianism. Good adaptation of the classical Bond theme.
https://gp6.googleusercontent.com/-p7nBvqIpqzg/AAAAAAAAAAI/AAAAAAAAAAA/SuzSeAmhUT0/s48-c-k-no/photo.jpg?sz=64
PrinceJedimaster commented on 09 Oct 2009
I hope you do not mind if I pray for you.
https://gp6.googleusercontent.com/-p7nBvqIpqzg/AAAAAAAAAAI/AAAAAAAAAAA/SuzSeAmhUT0/s48-c-k-no/photo.jpg?sz=64
PrinceJedimaster commented on 14 Apr 2009
I agree. Perfect for the Easter Season.
https://i1.ytimg.com/i/LO6SsrWKSwGLy5rHqUFs4w/1.jpg?sz=64
spechymogul commented on 10 Nov 2009
IT'S A REALLY GOOD SONG
https://i1.ytimg.com/i/1KdMKVIrJKtL4uhABg_img/1.jpg?sz=64
Miahjames488 commented on 14 Apr 2009
2 gooooood songs!

PIER VILLAGE BOARDWALK AND BEACH AT NIGHT - NJ New Jersey Shore Ocean View Travel Tour Guide

Pier Village boardwalk and beach scene at night. Thanks for watching. beach ocean New Jersey NJ shore front view views scene surf surfing sand water wave ...
Sign up for free to join this conversation on fsaved.com.
Already have an account? Sign in to comment