Tesla coil bracelet Videos

• 1. Making Music with Tesla Coils: ArcAttack
• 2. Portable Lakhovsky MWO Tesla Coil w' Argon bulbs
• 3. MSI Tesla Coil
• 4. Tesla Bracelet Infomercial
• 5. BI POLAR TESLA COIL(STEAMPUNK) ABRAMS LaB /HV-ART
• 6. Tesla Coil Maker Faire 2009
• 7. Adjusting the Spark Gap on the Tesla Lakhovsky Coil.
• 8. LED Coil Bracelets

Making Music with Tesla Coils: ArcAttack

User Comments

Jared Lopesz commented on 04 May 2013

love the tesla coil music

Nicholas Barry commented on 12 May 2013

777th view YAY

Portable Lakhovsky MWO Tesla Coil w' Argon bulbs

User Comments

Æternal Alchemy commented on 20 Sep 2013

what do you think about morgellons? if that "disease" is real, then adding electrons could feed the micro-organisms. the solution would be to use a magnetic pulser regularly, to ensure the morgellons organisms stay dead, so they don't feed off the electrons.

ROCKOLA79 commented on 20 Sep 2013

Hey i hav'nt seen the cat lately he did'nt get to close with his tail or something to the Lakhovsky did he? RIP Mr putin...

ROCKOLA79 commented on 20 Sep 2013

Are you sure? proofs in the putin...hahahahahahahaha

syyenergy7 commented on 20 Sep 2013

He's fine :)

MSI Tesla Coil

Tesla Bracelet Infomercial

BI POLAR TESLA COIL(STEAMPUNK) ABRAMS LaB /HV-ART

Tesla Coil Maker Faire 2009

Adjusting the Spark Gap on the Tesla Lakhovsky Coil.

User Comments

Michael Huang commented on 14 Oct 2015

What's the name of the instrument you are using for adjusting the spark gap?

Michael Huang commented on 16 Oct 2015

Glad to hear its still in good working order for you. Its a very cool machine.

syyenergy7 commented on 15 Oct 2015

+Michael Huang Mine still works.

Michael Huang commented on 15 Oct 2015

Problem fixed, by flipping the tungs around. The tungs wear out fast. How often do you change the tungs and is your unit still in good working condition?

Michael Huang commented on 15 Oct 2015

Everything seem new and clean enough, Have to ask supplier. what screw plier did you use to unscrew the snug?

syyenergy7 commented on 15 Oct 2015

+Michael Huang The electrodes could be dirty or the set screws are not making good contact. Not sure what it could be.

Michael Huang commented on 15 Oct 2015

My new portable mwo shut down, flickering only after a week of use. I measure with tape, the tungstens are about 3mm apart. Did the tungsten actually move inward? I have to loosen the screw snug and move the tungs farther apart? What else did i miss..There's not much info in manual for maintenance. Thank you for the help.

Michael Huang commented on 15 Oct 2015

Thank you for the clarifying. what tool do you use for unscrewing the screw snug.? And does the tungsten need replacement, Cleaning?

syyenergy7 commented on 15 Oct 2015

+Michael Huang Just leave the set screw snug, not tight, while adjusting.

Michael Huang commented on 15 Oct 2015

Thanks for the response. The tool seem to use only for measuring.how do you adjust the tungsten, in step by step mode?

syyenergy7 commented on 14 Oct 2015

+Michael Huang Vernier caliper

LED Coil Bracelets