Explain bts configuration 4 2 2 Videos

• 1. Real Feedback - Ease of Use part 1 (2 of 15) - Yamaha TF Series
• 2. BTS configuration ,setup and installation video
• 3. Explain WE GBBR M4 BTS How it works
• 4. Tutorial: AlexMos HiFly 5kg Gimbal full Setup and Electronic explained (Movi M10, Defy G5)
• 5. Xtreme Outfitters Faceplate Video Contest Submission #2
• 6. GoPro Mounts Tips & Tricks part 1 of 3 HD

Real Feedback - Ease of Use part 1 (2 of 15) - Yamaha TF Series

BTS configuration ,setup and installation video

User Comments

Van ISAMPANI commented on 10 Oct 2013

la valeur de l'homme se défini que par sa capacité scientifique!

Adnan Raza Khan commented on 01 May 2013

is this installation fuck yew man t0 vast my time

McInnocent Madzima commented on 23 Nov 2014

Add a voice explanation to you video

Explain WE GBBR M4 BTS How it works

User Comments

shboo na commented on 11 Feb 2012

you should get 01 steel or 4041 Steel or polish steel

NSWtury commented on 08 Feb 2012

thank you very much :D

Tutorial: AlexMos HiFly 5kg Gimbal full Setup and Electronic explained (Movi M10, Defy G5)

User Comments

Dmitriy Gorelikov commented on 02 May 2015

Is this the same gimbal controller model? //goo.gl/EdWzqT Looks good. 3 axis and nice price.

Timo Rucks commented on 04 May 2015

+Dmitriy Gorelikov It is very similar to my old 8-bit board.

fiskejournalen commented on 25 Mar 2015

Hi Timo! I'm not 100% sure but I think my board is broken to. I can get roll/Pitch work perfectly but i cannot get a smooth yaw axis. It feels like the motor stick to it's poles when I'm using yaw. Then my yaw is not following the gimbals motions. Sometimes i can "wake it Up" and it follow but it's still shaking. What do you think. Could it be broken? 

Timo Rucks commented on 19 Jun 2015

+fiskejournalen It is hard to say. Could you find out if it is broken? Many people have problems with the yaw axis like myself. I changed the board and solved the problems. But sometimes the yaw problems just disappear. The alexmos board is not always the best.

vishal chan commented on 23 Feb 2015

any idea how long battery life is giving? thank you!

Timo Rucks commented on 25 Feb 2015

With my 3S 10400mAh battery many hours. But I never counted

Bill Patton commented on 23 Dec 2014

Mr. Timo, I was wondering if you ever had problems with yaw drifting but the other two axies stayed perfectly still? I have the dys 3 axis controller along with 4 position joystick. Could this be some type of interference? Maybe just a software problem? Please when you have some time could you tell me what's the problem maybe? Thank you in advance for any information you may have. Sincerely, Bill Patton

Timo Rucks commented on 26 Dec 2014

I remember that I had to disable all my RC settings before I could manage to tune my 32-bit board. Find my settings here: //hannaundtimo.ch/steadycam/

Bill Patton commented on 25 Dec 2014

Oh okay. I have the 32 bit unit. It was from Foxtech, the one that has a cover over the board. Thank you for you're reply. It maybe PID settings but have not found the correct setting yet.I built my own design to fit my needs. I wonder if my board is bad.

Timo Rucks commented on 25 Dec 2014

Hello Bill,yes I had problems with my yaw motor, it was drifting all the time. The electronic board was broken and I got a new one. It was the old 8-bit board you see in the video. Now I changed to a 32-bit board and never had any problems with yaw drifting.Regards,Timo Rucks

Xtreme Outfitters Faceplate Video Contest Submission #2

GoPro Mounts Tips & Tricks part 1 of 3 HD