Playstation power supply Videos

• 1. YIHUA PS-3010D LAB POWER SUPPLY REVIEW AND REPAIR
• 2. Venom PS-2 Professional Tattoo Power Supply
• 3. ВОССТАНОВЛЕНРР• БЛОКА РџРРўРђРќРРЇ DAZHENG DC POWER SUPPLY PS-1502DD
• 4. PS-1502DD Bench Power Supply teardown and repaire
• 5. HP Model PS-3701-1 725w 60a Power supply 12v banana jack R/C Lipo charger conversion
• 6. Yankee PS-M2 Power Supply
• 7. PLAYSTATION 3 power supply fix

YIHUA PS-3010D LAB POWER SUPPLY REVIEW AND REPAIR

User Comments

Tomtech29 commented on 18 Oct 2015

Hi Hello, I would like to ask if you were able to find exactly such a scheme from this model (W E P 3010D) It is almost identical to your YIHUA. I have it completely in parts, An overview of what you get is not quite accurate and I'm not able to locate the damage, I wonder whether there were all hardware 4 transistors are NPN? Please let me know how you knew something about the schema Thanks.

electronupdate commented on 19 Oct 2015

+Tomtech29 no, sorry i have never seen the exact schematic for the 3010. if you search for the 5A version ("yihua 305d power supply schematic") it seems to have some similarity with this product.

mrsemifixit commented on 23 Sep 2015

What's the middle terminal used for? Yellow one out of box

electronupdate commented on 29 Oct 2015

+mrsemifixit chassis ground.

Murnel Babineaux commented on 04 Sep 2015

Rubycon is a very reputable capacitor company

Mtaalas commented on 23 Nov 2015

+Murnel Babineaux But 100% sure it's not genuine Rubycon cap, they're expensive.

Wes Dotson commented on 21 Jul 2015

CAN YOU PLEASE TELL ME WHERE TO GET A SCHEMATIC OF THE 0-30 VOLT, 0-10 AMP POWER SUPPLY I HAVE HAD MINE FOR ABOUT A YEAR AND THE OUTPUT DIED. I REPLACED THE 4 OUTPUT TRANSISTORS I CAN ADJUST THE VOLTAGE OUTPUT FROM 0 TO 30 VOLTS BUT HAVE NO CURRENT. THANK YOU FOR ANY HELP YOU CAN GIVE ME.

Wes Dotson commented on 23 Jul 2015

+Wes Dotson

thra5herxb12s commented on 23 Jun 2015

I have been wanting one of these "Yeehaaa" power supplies for a while, mostly because of the price. What I want it for is running laser diode modules and charging lipo batteries for my rc models, both very sensitive to voltage and ampage. Is this the one for me or should I pay a bit more for something else.

thra5herxb12s commented on 28 Jun 2015

Thanks I just got one of these. It's not named yeehaa in fact it has no name at all but they are all the same thing made in china, even the case is the same.  I will try the calibration mods before I fry any expensive laser equipment or worse blow a lipo battery through the ceiling.

electronupdate commented on 28 Jun 2015

+thra5herxb12s Buy a used HP power supply on ebay.

skilled hiko commented on 08 Mar 2015

Hello electronupdate, i have PS-1502DD+ 15V and i want modify it to increase output voltage to 24volts? thanks in advance/ pls advise

electronupdate commented on 08 Mar 2015

buy a different supply... you would need to rework so many components it would not be economic.

killer1479 commented on 04 Feb 2015

yihua ? did they call it that cos some poor chinese bastard electrocuted himself making the very first model ? :o

killer1479 commented on 21 Oct 2015

+SteelBlueVision lol

SteelBlueVision commented on 21 Oct 2015

+killer1479 No:Yihua - The sound you utter when you turn on this power supply, it sends 15 volts shooting into your connected 5 volt arduino and you see the magic smoke.

Venom PS-2 Professional Tattoo Power Supply

User Comments

Remo Barcellone commented on 06 Feb 2015

Interested if anyone has bought this and what their thoughts on it are? 

ВОССТАНОВЛЕНИЕ БЛОКА ПИТАНИЯ DAZHENG DC POWER SUPPLY PS-1502DD

User Comments

Валентин Вольский commented on 18 Jun 2015

Как подключен кулер, если напрямую, то не удивительно что сгорел.

Схематик commented on 19 Jun 2015

+Валентин Вольский Я перегрузил блок питания подгорел диодный мост и переменка шуранула на кулер.

Сергей Романовский commented on 08 May 2015

А можно ещё было вместо сплошного отверстия просто сверлить много малых для кулера. И жёсткость задней панели была бы выше. и т.д. Спасибо за идею.

Схематик commented on 09 May 2015

+Сергей Романовский С жоскостью нормально много отверстий можно сделать НО уменьшится забор воздуха и увеличим шум)

SAGe NeMoguNET commented on 08 May 2015

Посоветуйте БП с Али или любого кит. магазина, который вы бы с удовольствием купили вместо теперешнего, если бы на это были свободные деньги и желание - такой чтобы не супер дорогой, но чтобы хватало на все случаи ремонта комп и моб техники. Спасибо!

Rostik Chvarkov commented on 12 Dec 2015

+SAGe NeMoguNET GOPHER CPS-3205E

Сергей Романовский commented on 08 May 2015

Присоединяюсь к Вашей просьбе и СПС автору.

FunySmileXa commented on 03 May 2015

Скажите пожалуйста для чего нужны сопротивления которые Вы вынесли на радиатор, в данном блоки питания

Схематик commented on 03 May 2015

+FunySmileXa Для измерения тока потребления из за этого они греються.

Кирилл Никонов commented on 02 May 2015

Что с камерой?

Схематик commented on 02 May 2015

+Кирилл Никонов Снимал с рук потом решил ютубом стабилизировать) убрал стабилизацию снимаю я на iPad mini

PS-1502DD Bench Power Supply teardown and repaire

User Comments

mohamed lameche commented on 08 Feb 2015

macha allah rabi yahefdek

HP Model PS-3701-1 725w 60a Power supply 12v banana jack R/C Lipo charger conversion

User Comments

amadzack666 commented on 21 Aug 2015

i had the exactly the same psu..but my problem is the power relay keep turn on,off under load,,can you help me with my problem?

amadzack666 commented on 12 Nov 2015

you welcome :)

SHLOMO AMAR commented on 12 Nov 2015

+amadzack666 Thx

amadzack666 commented on 12 Nov 2015

basically you just need connect pin7 to ground..

SHLOMO AMAR commented on 10 Nov 2015

+amadzack666 Thanks. found that both pins must be connected to ground.//static.rcgroups.net/forums/attachments/6/9/1/2/6/a4104500-96-Modifying%20PS%20for%20Ham%20Radio%20use%20P2.jpg

SHLOMO AMAR commented on 10 Nov 2015

+amadzack666 Hi can you please tell us what pin did you shorted to ground?

isaac schofield commented on 24 Aug 2015

+amadzack666 that's whats up man yeah its a beast for sure.  don't know why that light flickers in the video but its solid green when I use it.  I have it running about 27 amps when im racing and it runs like a champ barely warm at all.

amadzack666 commented on 23 Aug 2015

+amadzack666 nvm i solve it myself,all i did is just jump one of the short pin to ground,and then green led glow bright instead glow dimmer and blinking like in the video..this thing is beast pulling about 30amps using 2x car amplifier still doesn't drop even 0.5v,cheers.

Yankee PS-M2 Power Supply

User Comments

Euphoriaman commented on 02 Jan 2011

@scoobydooku With a daisy chain you have 1 current of electricity so each pedal when turned on will be pulling power from the same current. So sometimes power will fail or can fail or cause a buzz or hiss, even if no pedals are on. With power supplys like this, each current is isolated (isolated power for each pedal) so every pedals gets exactly what it needs and there's no hum or buzz so the guitar's signal is usually a tone better!

DemolitionColorScheme commented on 02 Nov 2010

@Burgerman666 Yeah, exactly. I wouldn't need it, but I can see this thing to be a success when it hits the U.S. market, among others. I can spot a winner when I see one. ;) Regarding the hum: is it audible in the signal chain, through the amp / recording device or did you mean physical humming (which would be strange, but just checking!)

trebleboostboy commented on 03 Nov 2010

@Burgerman666 well i hope a 120V version comes out, being of POL background, this would be rad. I had my eye on the SIX for sometime, but will keep this guys products in mind. An AC outlet would also be awesome for us hardwired DMM users and Tube pedal pushers !!!

DemolitionColorScheme commented on 02 Nov 2010

Man, this thing is brilliant! Never seen so much power outputs out of such a small box. How well is it isolated? Have you tried putting a pedal next to it?

David Fisher commented on 02 Nov 2010

Do want. I'm looking have having to buy another PP2+ since I've got around 14 pedals now. I'd rather save space and have just one unit. I'm sold!

Chris Schoonover commented on 02 Nov 2010

Guess that means I shouldn't jump on selling my power supply to get one of these. Sounds great though. Been looking for one this adaptive.

scoobydooku commented on 02 Nov 2010

Pedal power supply VS Daisy chain, what's the difference? What's the advantage of using a power supply since it costs more?

Jay Chauhan commented on 31 Mar 2012

overall found it to be an unreliable power supply (very heavy too)....my PS-M2 crashed out twice halfway through gigs.

Euphoriaman commented on 02 Jan 2011

yes please do let everyone know when the 120 volt version comes out!!! this is just what i need!

cosmogang commented on 02 Nov 2010

this puts out SERIOUS juice! 2 amps! You could power a Damage Control pedal with that thing!

markky212 commented on 15 Aug 2012

Yes it will! What will happen, is that you'll have a little less voltage that 9V output.

trebleboostboy commented on 02 Nov 2010

POOOOOOOOOOOOOOOOOOOOOOOOOOOLSKA POOOOOOOOOOOWWWWWWWWWWWEEEEEEEEERRRRRRR !!!!!!!!!! : )

chuenx commented on 15 Nov 2010

hi~In my country, it is 220V, 50 Hz~ will this power supply works?

Euphoriaman commented on 02 Jan 2011

@scoobydooku ..the guitars signal is usually *a lot* better.

PLAYSTATION 3 power supply fix

User Comments

Multiman369 commented on 11 Nov 2010

@zubatzu If the cables you used from the power supply are of the same voltage as the ps3 requires it should work.When you try to power up and it does not, but the red light remain blinking and nothing else happens,you should then be looking at the motherboard reflow fix for ps3.In my experience of ps3 power failure i never got any light showing,hope this helps.

2paxyou commented on 03 Mar 2011

not clear. pinouts in this video are wrong? this is a 20 pin ATX connector. ATX version 1 and not AT in the video: red cable on +12V pin 10 black cable on com pin 5 other cable on ps_on# pin 14 and com pin 15 not clear the voltage on red cable connected to 3 cable connector. not clear other 2 cable connections on the same connector not good.

Multiman369 commented on 05 Mar 2011

you have a +5v pin and the -5v pin the 3rd is the on off pin of the ps3, and does not make a difference whether you connect it or not.these are connected to the molex connector of the power supply.if not clear about the 24 pin plug look up in you tube jump start power supply, there are lots of videos on this , good luck.

Multiman369 commented on 10 Nov 2010

@garretts228 The only way i could recomend is getting a working bluray drive which matches yours and start changing parts until u figure out which one works ,find a friend or a relative from whom u can borrow the drive,if you start buying parts you might end up throwing your money away,i am sorry if this is not much help.

Multiman369 commented on 03 Mar 2011

In the description it says ATX power supply and NOT AT as u claim , its also a 24 pin connector and NOT 20 pin like u also claim to be, you only have to count the pins , please dont confuse people,if u need to know something just ask.

Multiman369 commented on 18 Jul 2011

you actually need a volt meter to test that cables from the outlet, there are very cheap voltmetres around that would do the job, on the continuity setting to check if any cables are broken which i would think its unlikely.

todoinsano commented on 28 Dec 2010

thank you... i was in doubt with the 5v 3 wired ( pson, GND, 5v ) if does or not make a difference if connected or not. but reading the comments became cleary ! nice video. ( sorry for a bad english - engrish :P )

0000DaRkAnGeL0000 commented on 02 Dec 2010

Does anybody know which cable or where is the cable connected to that you need to switch the ps3 on. I have everything connected and have a red light, just need this step to turn on or get the green light.Thank you

2paxyou commented on 04 Mar 2011

ok sorry. ATX with 24 pins. i see: pin 16 PS_ON# and 17 COM self connected pin 11 12V red cable and pin 7 COM black cable. is it right? can you explain the pinouts of 3 pins connector? thank you

Multiman369 commented on 08 Nov 2010

In this video the bluray drive is powered up by the motherboard which is powered up by the atx power supply.It should be possible to also power up the bluray drive with the atx power supply.

Multiman369 commented on 09 Nov 2010

@garretts228 To be able to help you i would need all the info on what u have done up to now, but if u have fried something already i dont really think there might be a chance of repair.

Kurt Pugsley commented on 06 Apr 2012

my ps3 turns on for about 2-3 minutes then it beeps and the ylod shows up for like 2 seconds then it goes flashin red. anyone had this problem or knows how to fix it? please tell me.

homokinetikuscsuklo commented on 17 Nov 2010

thanks for the video, helped for me, though I tested the psu succesfully, turned out, that the ylod has to be caused by something else, maybe the gpu(means it needs reballing)

Penny Mathews commented on 09 Mar 2011

I tested my power supply and it is only holding a 2volt charge I heard that there was a way to jump start the pos back up if it is holding some charge. Any ideas?