Ford bronco vin lookup Videos

• 1. Bruiser Playing On Day Two After 4x4 Conversion Completion - Can You Guess What Engine?
• 2. 2014 Ford Super Duty F-350 DRW Chassis Cab 4WD Reg Cab 165" WB 84" CA XL
• 3. 2003 FORD F-150 SuperCrew 139" XLT 4WD
• 4. 1991 FORD F-150 Styleside 117" WB 4WD
• 5. 1995 Ford Mustang Shoreline WA Seattle, WA #20993
• 6. 2013 FORD Focus 4dr Sdn S

Bruiser Playing On Day Two After 4x4 Conversion Completion - Can You Guess What Engine?

User Comments

jonesd5o commented on 04 Aug 2011

@thanatos103 cool thanks been wanting to do this same thing to my 2wd reg cab short bed for awhile think itll make a better trail rig than my ranger i got a healthy 302 in mine though same trans you got well except the output shaft is shorter cause of the 2wd probably gonna have to swipe the rear drive line as weel should be shorter due to t case

thanatos103 commented on 01 Feb 2009

Yep, she was 2WD when I got her. The cheb will be a lot harder to convert. For my old Ford, all I had to do was get a 4x4 tranny and t-case, the front driveshaft, and the front 4x4 IFS and swap them in. Might want to get onto some truck specific forums online and see what all you would need to do to convert.

CHRISTOPHER TURNER commented on 27 Apr 2014

MY BROTHER I HAVE A 1994 CREW CAB F-350 4X2 BROUGHT FOR GREAT PRICE WHAT WILL I NEED TO CONVERT IT TO A 4X4 EMAIL ME WITH ANSWERS OR WEB SITE TO GET PARTS THANKS KEEP UP THE COOL VIDEOS OOOORRRAAHHHH!!!!!!! [email protected]

joshpaulette commented on 31 Jan 2009

so was this truck 2wd and u converted it to 4wd if so please tell me how and about what the cost was because i just got my 2wd chevy stuck and i am gone to convert it or sale it would rather convert it please right back thanks

thanatos103 commented on 12 Jan 2009

Yep, it's a 300-6. She's got about 279K miles on her and later in the day that the video was taken she pulled a 60' trees that was about 8" in diameter right off idle, then the tree broke.

jonesd5o commented on 03 Aug 2011

@thanatos103 so on a ford you just take the ttbs t case and drive shaft and trans and its a bolt in deal? sweet cause i wanna do this with my f150

thanatos103 commented on 04 Aug 2011

@jonesd5o - That's why I grabbed the rear driveshaft from my donor truck. And my 300 inliner has roled over 310K and it still pulling strong :D

jonesd5o commented on 05 Aug 2011

@thanatos103 cool my 302 doesnt have the mileage but the rest of the truck has 270,000 on it

jetman26 commented on 06 Jan 2009

sounds like a diesel but is the front setup custom or is it a bolt in from another truck

thanatos103 commented on 03 Aug 2011

@jonesd5o - Yes. Transmission, transfer case, driveshafts and TTB arms.

justinchaffin1013 commented on 31 Dec 2012

did you have to do anything to the frame to get the new axel to fit?

thanatos103 commented on 31 Dec 2012

No. Frames were the same on F-Series trucks from 1980 thru 1996.

rherbach1 commented on 13 Jan 2009

that sound about right. 300-6 is pretty much indestructible.

thanatos103 commented on 31 Dec 2012

Yes, but the process will be slightly different.

justinchaffin1013 commented on 29 Dec 2012

so can i do that for a 2000 f150 too?

Catamountfootball99 commented on 24 Aug 2011

sounds like the 300ci

rherbach1 commented on 11 Jan 2009

Does it have a 300 I6?

2014 Ford Super Duty F-350 DRW Chassis Cab 4WD Reg Cab 165" WB 84" CA XL

2003 FORD F-150 SuperCrew 139" XLT 4WD

1991 FORD F-150 Styleside 117" WB 4WD

1995 Ford Mustang Shoreline WA Seattle, WA #20993

2013 FORD Focus 4dr Sdn S