Home » Video » ...

Milwaukee bucks bed set Videos

Milwaukee Bucks Rim Rockers (Rim Rockers Video 1.)

User Comments

djmilx commented on 21 Feb 2013

Ayyyyye!! That was too smooth!!

TJ Cross commented on 22 Feb 2013

THAT SHI DOPE BRO BRO

Drill Hog drill bit review, drilling bed frame angle iron,

1_2_2016, Drill Hog, drill bit review, drilling bed frame angle iron, Drill Hog replaces broken bits for free, drilled 50x 1/8" holes thru angle iron, used motor oil for ...

User Comments

Avalanche2 commented on 16 Feb 2016

The HF titanium nitride bits are trash, they might be OK for wood, but they don't work at all on metal and actually ben easily.

Harvey Spooner commented on 19 Feb 2016

I tend to be sloppy when drilling holes, I don't use enough oil, I use the wrong kind of oil, and I tend to put lateral forces on the bits, breaking them. The 1/8" drill hog bit I've been using on nasty bed frame metal, must have drilled 100holes and still works like it is new. I recommend them completely...They drill the hardest metal like soft pine.

Avalanche2 commented on 19 Feb 2016

Interesting, I just ordered a pack of drill hog 1/8" bits - good to hear I made the right choice!

Harvey Spooner commented on 19 Feb 2016

+Avalanche2 , I start by drilling a hole with the 1/8 drill hog, then I go to the 1/4 drill hog, and use the HF drills to drill the final size hole... Thanks for your thoughts, watching, and commenting!!!!

sim6699 commented on 03 Jan 2016

I'm surprised you brake drill bits so easily. I use old drill bits from an engineering that closed, using the pillar drill hand held drill at a slow speed not applying to much for, especially for small diameter drills and centre punch before drilling.

Harvey Spooner commented on 06 Jan 2016

+sim6699 , Most of the drill bit breakage is my own fault, I spin them too fast, I do not oil them enough, I lean on them too hard, and I frequently put lateral pressure on them... That is Y for my standard testing, I used a drill press and plenty of oil. The way U use Ur bits, they should last almost forever, the way I use them, I should keep an eye doctor on speed dial... I appreciate your input, it reminds me how to do things right! Thanks also for watching and taking the time to comment Bud!!!

EvendimataE commented on 03 Jan 2016

the 29 pcs hf are in 64th of an inch increment which is too small...not necessary unless you are doing precision work.....id rather buy the 14pc dewalt, 1/16n - 1/2, from amazon for $15

Harvey Spooner commented on 06 Jan 2016

+EvendimataE , , When it comes to putting most things together, I seem to need just a few bits, 1/8, 1/4. 3/8, and 1/2" I bought 1/8 and 1/4 from Drill Hog, I think they will fit most of my uses... I rarely buy from Amazon, I should start checking with them before I make my eBay purchases... Thanks for the good info, watching, and taking the time to comment!!!!

ZIGgassedUP commented on 03 Jan 2016

No body wants to have a drill bit snap off in a 1/2 drilled hole...especially if it snaps off way down in a hole.

Harvey Spooner commented on 06 Jan 2016

+ZIGgassedUP , Mostly, I break 1/8" bits because I run them too fast, I don't oil enough, I push too hard, and I apply lateral pressure. I have not broken off a 1/2 inch drill bit yet, I don't think my cordless drills and drill press have enough strength to do that, but, I have had diagonal cutter handles snap off in my hand, so, one never knows what the future will hold... Sounds like U have had to get a broken 1/2" bit out of a recessed hole... I think that would be painful... Thanks for your thoughts, watching, and commenting!!!

Rusty “rustyglovebox” Glovebox commented on 03 Jan 2016

I've heard good things about the Drill Hog bits. Yep wear safety shield and or glasses. Good advise.

Harvey Spooner commented on 06 Jan 2016

+Rusty “rustyglovebox” Glovebox , I hope this comment goes thru, could not post it on the Honda 125cc clone video as a reply to Ur comment... " +Rusty “rustyglovebox” Glovebox, I look forward to see what U build... I have been trolling a Cushman Minute Mizer 3 wheeled scooter to put my engine on... I just need to make the Cushman purchase happen... Thanks for asking, watching, and commenting... I look forward to Ur comments and videos, Look live the Lister!!!! "

Josh Kilen commented on 03 Jan 2016

good review and nice to know the infomation

Josh Kilen commented on 06 Jan 2016

one more year in front of me, i am studying machining

Harvey Spooner commented on 06 Jan 2016

+Josh Kilen , How much more college do U have in front of U, what R U studying??? Thanks for the encouragement, watching, and commenting!!!!

59chevt commented on 03 Jan 2016

Harvey, nice review. thanks tom

Harvey Spooner commented on 06 Jan 2016

+59chevt , I was surprised how well the bits lasted when they were oiled and when they were not spun too fast. I was also surprised how bad the Harbor Freight, Warrior, Cobalt drill bits were... Thanks for the encouragement, watching, and commenting!!!! Happy New Year, may 2016 be great for you and everyone U care about!!!

ShawnMrFixitlee commented on 03 Jan 2016

Drill Hog all the way , HF won't send you a new bit .. I broke a drill hog and never even sent it back.. just contacted the guy and it was in my mail box ..

ShawnMrFixitlee commented on 06 Jan 2016

For sure Harvey . They say 90 day money back .. Let us know how it goes man !!

Harvey Spooner commented on 06 Jan 2016

+ShawnMrFixit , I am going to bring the cobalt bits back tomorrow, we will see what happens, Harbor Freight may end up on my list... Thanks for the good idea, watching, and commenting!!!

ShawnMrFixitlee commented on 03 Jan 2016

If they were true COLBALT they would be great bits , But there not . They are a mix of alloy and a cobalt coating ..But from what I hear 90 day money back fro HF .. Give it a try man .. !!

Harvey Spooner commented on 03 Jan 2016

+ShawnMrFixit , Yea, it seems that the Drill Hog guy is a stand up person and his drills are the real deal... I wonder if I can bring back the Harbor Freight Cobalt bits, they are just plain lousy.... Thanks for your thoughts, watching, and commenting!!!!

Adam Levine Shops Melrose Boulevard

Trying on some new sunglasses, Maroon 5 lead singer Adam Levine shops Melrose Boulevard with his model girlfriend, Anne Vyalitsyna. The couple had been ...

User Comments

AdamLevineLuv commented on 06 Jan 2012

They are celebs but they need there privacy can't they just have some romantic time together

Melissa Ciri commented on 01 Aug 2012

ohhh so thats how he looks without make up on. he looks the same but paler

MJandJohnnyDepp commented on 18 Sep 2011

LEAVE THEM ALONE, OMG JUST STOP FOLLOWING THEM AROUND, ugh

Sandra shark commented on 21 Jan 2013

"Would you do a kiss for the camera" Adam:"yeah, yeah" :D

Kathy commented on 09 Sep 2012

what are you talking about? he's always looking good c:

editha Parmeley commented on 28 Jun 2012

i'm jealous and i wanna punch her in the middle.

arvabenlikesham commented on 21 Aug 2012

I WANNA FUCKING DATE HIM

Sandra shark commented on 21 Jan 2013

Oh ANNE V !

Bon Jovi Milwaukee Bradley Center 2/21/08 Concert Part 1

For my photos from the concert see: //flickr.com/photos/epcot/sets/72157603964113884/ Footage of Lost Highway, Raise Your Hands, You Give Love a Bad ...

User Comments

All Around Orlando commented on 26 Feb 2008

I was behind you...I was in 209 ROW A. I wish I was closer...being that far back proved to be difficult on my zoom. I have some decent quality video from the later part of the show, as I pretty much just took it from the huge clear video screen. I'll be posting later this week.

lorioberg commented on 26 Feb 2008

Your videos came out WAY better than mine though because (being on the floor) I didn't have the elevation to get over people's heads :( I had a hard time getting good zoom with mine too being so far back. Can't wait to see more videos from you! :)

lorioberg commented on 26 Feb 2008

Great job!! I had trouble getting good video because I'm short & people's heads were in my way... lol!! I was on the floor row CCC section 11. Thanks for adding this! :)