Home » Video » ...

Ferrari dino tools Videos

The Marquis Dripper

A first look at The Marquis Dripper from Insignia Design. This was a collaboration project between myself (Dino Ferrari), Cisco from Avid Vaper and ...

User Comments

SUM1SLY83 commented on 07 Nov 2015

There's one problem I have with it that I would love if you could fix. Basically depending where your threads start and end depends which way your airflow points which means depending which way you hold your mod, so I vape right handed but if I hold my mod with my right hand the airflow faces down so juice runs out the airflow holes, I have to use my left hand to have the airflow facing up. It would be nice if you could work out a way to adjust your airflow to any direction you like once it's on the mod, maybe a way to adjust the 510 connection.

SUM1SLY83 commented on 07 Nov 2015

Oh and where do you get a new positive screw if you lose it ? Avid vaper doesn't even sell replacements.

Quinn O'Connor commented on 13 Jan 2015

This piece is worth every friggin dime. Thank you so much for makin this for me to be able to enjoy. There's a lot of $125 attys out there that ain't so great & for $20 more you get an unbelievably machined piece of art that performs like CHAMP! #0660 says thanks again. Ps-screw that ohm reader the vids about the Marquis! Hahaha

Strpr Swpr commented on 13 Jan 2015

Thanks Buddy.

Liza B. commented on 13 Jan 2015

yes rotating the crown post, field the vapor did a review saying that is adjustable but he didnt show how

Strpr Swpr commented on 13 Jan 2015

It's not meant to be adjustable. But you can rotate it from the bottom by taking out the copper pin and using a slotted screwdiver to turn the pin from the underside. Just turn it clockwise until you get it to the position you want. But it should be set in the correct place when we shipped it. The way Mike uses it is not the way it was intended.

Liza B. commented on 13 Jan 2015

where i can get the ground screws and the positive, i went to avid site and nothing

Strpr Swpr commented on 13 Jan 2015

Email Avid for parts please.

Liza B. commented on 13 Jan 2015

dino it is posible to adjust the center post crown, and if yes how? great rda!

Strpr Swpr commented on 13 Jan 2015

What way do you mean....rotating the crown post?

Samuraisahsah commented on 06 Jan 2015

You "leave it with a brushed finish" ,but you also leave it with an unbelievably high price tag. It's really unfortunate too, because I REALLY wanted this one, was very impressed with the design, but I just can't support that kind of pricing because we vote with our wallets and I'm not going to support a trend towards that kind of pricing...as much as I love the device. Seriously disappointing =\

Strpr Swpr commented on 07 Jan 2015

Too bad....you don't know what your missing.

Ryan Lowe commented on 05 Jan 2015

WOW!!! Way to much work!!

Strpr Swpr commented on 05 Jan 2015

Seriously? LOL....this is probably the easiest atty to build of any dripper out there.

Detailing a 1972 Ferrari - Part 3 Tools and Products

Chem-Tools präsentiert das Jochpass Memorial 2012

Chem-Tools finest automotive care & MB-Event proudly presents Jochpass Memorial 2012 Eine hervorragende Veranstaltung in Süddeutschland die man nicht ...

1/18 police diecast working tools

User Comments

dmstealth commented on 03 Oct 2009

Y'know when you said dremmel I was thinking "Jeez that must have a micro-sized motor" before you said it was hand-driven. Regarding your decal paper, are they from one of the online hobby sites or somewhere else? Thanks for sharing though!

badge764 commented on 29 Jul 2010

@NYPDunit28 lol....... its for filling in holes, holding items together--its a heavier glue. if you fill n a hole (small one) then let dry you may not have to sand it down and paint over.

MBenzSL65 commented on 03 Oct 2009

Hot glue guns help too :D I love my drummel. I also have a reamer which is good for making bigger holes in plastic...Cool video!!

badge764 commented on 03 Oct 2009

was thinking or it but want to try and keep a few withthe hubs like this..keeps them dated.

ellisfd4821son commented on 04 Oct 2009

i think i have some extra do you need any more surgical clamps?

CobraCustomDiecasts commented on 03 Oct 2009

Nice!!, yeah the right tools make everything much easier.

NYPDunit28 commented on 29 Jul 2010

sam can you explain me for what are you need cement

msacof commented on 12 Oct 2009

I hope that 'MOM' is feeling better!

badge764 commented on 04 Oct 2009

thnx, but i have a lot of them.

badge764 commented on 03 Oct 2009

lol..any scratches?

MBenzSL65 commented on 03 Oct 2009

Ahh ok, thanks!

Giving poor people on minecraft good tools

i have been doing this all day. i have made many friends now and i dont plan to stop. and the dino in the background is a Carcharadontasaurus. im a dino nerd.