Henry ford my chart Videos

+Peter Chiavaro most people don't comment on songs because there's usually nothing to really comment on, its a good song so they either like it or add to their playlist

+Peter Chiavaro The people just hear this great song :´D

Yes, it is! Thanks for remembering.Richard

+Hotrodelectric i agree. great tunes

+Joshua Cudyker God, yes. I was getting ready for my senior year in high school.

+Eric Corse listen better

+Eric Corse Listened too it again now I'm confused.

+Johans60Thank you ever so much!

+Stev Rex no it will not

+Go Mad Because v8s have much more parts available than sixes.

+Larz DOHC Ferarri v12 level power out of a v12 made in a guys garage in an old school pushrod and carburatted style, but that guy thinks it doesn't make a lot of power...WUT. Also it's a smaller package than a OHC setup, more tuning and it'll probably be 750-780 area. Be awesome if he got down on an EFI system for it. People doing stuff like this really makes me wish I had a shop and unlimited time and decent funds to make ridiculous motors and cars. Speaking of cars I'm very interested as to what he wants to put this in, they mentioned he wanted a le mans style engine, maybe he'll build a crazy mkII style thing.

I know what you're saying but you figure that's about right considering a big inch v8 from ford dodge or Chevy using iron heads and pump gas is going to be that ballpark or even a little less depending on cam carb and head porting.

Okay, relatively little power. There are naturally aspirated V8s making more HP. It has already been stated however that this engine is making great torque. Torque is very often overlooked.

700hp naturally aspirated pump gas is not little power

+Shane Richardson Also he probably built this to have some fun and play around with and it be reliable since its a 1 off, I would imagine he used mostly modified stock parts and didn't build it to the max for that reason.

+Shane Richardson horsepower is a function of rpm

+Shane Richardson because of torque

+R GM is shit. Go to a j/y look how much newer the cars in the GM section are. 10-12 years and done. Rotting in half at the rockers, taking brake and fuel lines out. That's if your lifters didn't fail, or connecting rod didn't pop your oil pan, or your ignition switch didn't kill you. Leaky intake mani- you may as well just assume every fluid will leak. Or, you bought a Corvette and you have valve guide failure. Generally Manure.

+gatti 500 Yes shame on them for using canted valve heads when they could have used inline Chevy heads that don't move as much air but at least they are Chevy. Don't you guys ever give up. All you do is copy Ford and then claim you invent it. Like Y Blocks, cross bolted mains. Non Siamese intake and exhaust ports shaft mounted rockers all old Ford ideas. Chevy finally mover the dist out front just before everybody did away with them.

+MICHAEL SACCO i struggle on a daily basis with the things ford makes and made.albeit the european branch....

+gatti 500   YOU MUST BE A GM GUY........TRY A HISTORY LESSON ON ALL THE THINKGS FORD DID BRFORE YOU MAKE A COMMENT LIKE THAT.

so agree

+Bama MoonDog You're welcome!

+Patricia Lozano You're welcome!