Home » Video » ...

2013 vw jetta 2.5 se performance parts Videos

2005.5 Jetta 2.5 custom Magnaflow exhaust

Factory non-resonated exhaust with Magnaflow 11375 in place of mid muffler (and rear suitcase delete from previous vid).

User Comments

Robby Brand commented on 15 Feb 2015

Awesome sound. I have a 2007 2.5. What would I have to do to have this exact sound?

JazzAlto09 commented on 18 Feb 2015

No prob! Glad to help.

Robby Brand commented on 18 Feb 2015

+JazzAlto09 awesome thanks a lot man appreciate it

JazzAlto09 commented on 18 Feb 2015

Probably… if you read the other comments, I mentioned fitting a larger #14211 with a couple of mandrel bends, and I'd also recommend a 10-12" glass pack/resonator if your car didn't come with one.It's not loud enough to disrupt conversation or music, but it does drone a bit without the res.

Robby Brand commented on 17 Feb 2015

thanks! is this louder than the AWE tuning exhausts?

JazzAlto09 commented on 16 Feb 2015

Thanks! Replaced the mid muffler with Magnaflow #11375, deleted the rear muffler, and finished off with OBX T60a tip. No intake of software upgrades done in this clip.

Alejandro Vergara commented on 17 Jan 2015

is it like loud loud in person like can you hear from the inside or it not really

JazzAlto09 commented on 18 Jan 2015

I can't promise it will sound the same, but definitely similar. Inside the car, even with windows up, the exhaust note is very noticeable, but not to the point of being annoying. The drone can pretty well be covered by music at a comfortable volume, and doesn't interrupt conversation.I'd recommend a 5x8x14 offset in/center out muffler for rear mounted setups.

Alejandro Vergara commented on 08 Jan 2015

hey i have a 2006 jetta 2.5 and im tryna get the same sound as yours can you tell me exactly what ypu did so when i go to the muffler shop tell them the magnaflow exhaust

JazzAlto09 commented on 10 Jan 2015

I had the mid muffler replaced with Magnaflow #11375, and the rear muffler had been removed. If your shop can do mandrel bends (or just buy a couple 120° and 90° 1-1.5x radius bends) it will be easier to fit (maybe even able to use the slightly larger #14211). As long as you're using a single mid mounted Magnaflow, it should sound like this.