@fe3lgud007 never mind I found it! Ive seen that paint job applied to
sheels quite a bit, Im personally not a fan of the paint but the car is
pretty sweet!
Steve and I(Patrick) have at it with our tuned and tested Countersteer Chassis. Dmax S15 is the R31-16FM and FT86 is the Sakura D3 R31 at 161% CS and SD3 ...
The linkages that come with the are the small ones that can't be adjusted
(completely plastic) I feel that those are too small. Then there are the
next size u that is adjustable but when I adjust them to be the smallest
they can be they are too big. The aluminum part in the middle of the
linkage is 5mm long and 4mm wide. The ones in you videos look smaller. And
it seems to me that you have them adjusted to the smallest or almost the
smallest they can . Did you have this issue?
Dude I need some help tho. I just bought the R31-16 fm the whole options
kit (the one that doesn't need the donor) well I got all the way to the
part were I have to install the linkages on the suspension. What attaches
to the little balls. I have the 13 degree castor kit and It seems to me
that with the linkages that comes with the kit won't be able to adjust the
suspension properly. I noticed u don't use the stock ones, do you?
For Eagle Racing R31-16fm, get the Slotted Pin Pulley. :) Here's a list for
possible safe combinations. you have to be careful when doing your own,
teeth and belt may not line up and start skipping. search up eagleracing
with this: /jp-net/jp-cont/on_new10/R31-16FM.html
Hey Man thanks a lot, for the safe counter-steer options I have (39-16)
(20-16) (23-32) 1.19 cs that's another safe one you could add to the list.
I wanted to have a cs option close to the d3, all my friends have them.
I prefer my r31-16fm broadtech online has a full hopped up version for
about 230. Plus they have many options for countersteer parts and plus it
comes in alloy blue or gold.
We have to meetup at a swd event. Since the track is at my friends place.
We need to observe people at an outside event to see if we all get along.
Its just the process :)
The only thing i really like from the sakura are the springs which u can
buy for about $6. On CS, id run those with orange in the front and white in
the rear