2004 chrysler sebring turn signal Videos

pfff

Try the above solution by Susan Miller.

Hi Stephane,Did you fiwed the problem?, because i have the same problem for my jetta 01

That is what I thought too. I'll never know if that was the root cause bc I replaced them and cleaned the switch in one try. I had other electrical problems related to the key fab and it fixed those. 

Wait… if you were missing fuses where did they go? Wouldn't the turn signal not work at all -ever -without them?

+ballerina617 As it turns out I was missing a few fuses. Not that they were blown, but just not there. I replaced all the missing ones. I then took out the hazard switch and cleaned it. It looked like someone spilled Coke on it. It was a sticky black gel. Probably put their Coke on the dash and then it spilled down the whole instrument panel. It worked after that. 

Yess dude i used to hit the molding and it would start working too!

+Drayton Kittel My 99 jetta is doing the same thing, buzzing when I use turn signal (and no signal). I replaced the hazard switch but it is still doing it so It is not the hazard switch (waste of money on a new switch) what I figured out was that if I press on the molding just above the switch the turn signal works! It's bizarre but I think if I take it apart and pack something in there to make a tighter fit for the plastic molding then it will work. It is a ridiculous fix but I just have to shim the hazard switch in tighter. Shrug. The Jetta is a whacky car but has 219k on it!

i just punched it and it started working, id recommend taking it out and cleaning the metal parts in the back and if that doesnt work go to the junk yark and pull one out its really cheap, around 20$ i think it might even be 20 for a new one

I have the same problem. '03 jetta. No turn signal but the hazards work. When I try and turn the turn signal I get a buzzing sound from around the hazard button . Did you ever find a fix?