Enter your query, example: how not cry when slicing onion or how to enter an Free Italian Sex Webcams?

Dayton ohio sears Videos

Whirlpool, Maytag,KitchenAid,Kenmore,Roper & Sears- Refrigerator Repair- Not cooling

Repair your own Maytag Refrigerator which has these following symptoms: Not cooling Visit us at //www.appliancevideo.com To finish this repair we had to ...

User Comments

https://lh5.googleusercontent.com/-BwyD2dX2Urw/AAAAAAAAAAI/AAAAAAAAABc/I-i-rPCoE2o/photo.jpg?sz=64
A few days ago, the bottom freezer door was left ajar for some time before we noticed it. Will this cause a frost build-up problem that may not self correct even if the control panel is OK? I ran a diagnostic check of the control board: Test 1 for Defrost displayed a 0 then quickly displayed 5. Can you just replace the control board without going through the manual defrosting procedure?
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
+Whydo Uask                    All of our technicians are now answering questionsdaily at our //www.appliancevideo.com/ website under the Repair Help section.  We also have over 1600 common questions andanswers that you can easily search through by your model number, appliancemake, problem or error code and it’s absolutely FREE. You also have the optionto email a factory service technician with a question on your appliance at//www.appliancevideo.com/repair-help/ . If you’re looking for a repair video, youcan also search our library of over 2600 free repair videos. ApplianceVideo.comspecializes in quality DO-IT-YOURSELF appliance repair videos and we get over800,000 views per MONTH to our videos worldwide and growing. If you need ofparts for your major appliance, we have over 5-million parts in stock at //savemoreonparts.com/ .  Thanksfor your support. Matt Ace Appliance factory service technician.
https://lh6.googleusercontent.com/-igR_y_i3ibs/AAAAAAAAAAI/AAAAAAAAABE/L9OhDIaYmk4/photo.jpg?sz=64
Ditto what Randy A said ... EXCELLENT how-to video!! I'd figured out on my own that the defrost cycle wasn't working but had thought it was a bad defrost heater. I ran the on-board diagnostics and everything else was OK. I had not considered that the control board could go bad until I saw your video. Nevertheless, I wondered why you did not check the defrost heater? After viewing your video, I did more research and discovered that the control board frequently failed and that the defrost heater rarely failed (a fact that the appliance parts guy later confirmed). So, your depth of experience showed well here. Viewing your video made removing the control board housing easy. I probably could have figured it out but probably would have broken one or more of the mounting tabs. Your video saved me a lot of potential grief. Thanks.
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
+val jue  Thanks for the positive comment. Hopefully we savedyou some money. Please help us provide more videos to our site by posting ApplianceVideo.comon your YouTube, Facebook or Twitter account or add us to your circles. If you are in need of any parts please supportour parts department on line at //savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Easterntime. Thanks again your support.  Matt, Ace Appliance service technician.     
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Thank you for this Great Video! Could 12 be used as a panel code for MFF22558VEM model? Thanks 
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
Hussein         All of our technicians are now answering questions daily on the ApplianceVideo.com website for anyone needing help. Just copy and paste this this question under REPAIR HELP, and one of our  factory authorized technicians  will answer any technical questions at absolutely no charge on your appliance issues. We also have over 2600 free repair videos to help with your appliance repair issues. Thanks for your support. Matt Ace Appliance factory service technician.
https://lh6.googleusercontent.com/-cKCHle16FFg/AAAAAAAAAAI/AAAAAAAAAG4/4BZapTF_e0Y/photo.jpg?sz=64
Thank you! very helpful video! I just fix my refrigerator!
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
Guadalupe                  Thanks for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. Please help us provide more videos to our site by subscribing to our YouTube page or posting ApplianceVideo.com site on your Facebook or Twitter account. We also have our factory authorized technician’s email daily free professional advice to people like you to help solve their appliance problems. Thanks in advance for supporting us. Matt, Ace Appliance service technician.     
https://lh3.googleusercontent.com/-8Gzp3hdySgw/AAAAAAAAAAI/AAAAAAAAB_I/_9mlogRO_Yg/photo.jpg?sz=64
Excellent video!! Thanks for taking the time to make!
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
Randy          Thank you for your positive comment.  Please help us provide more quality videos  by subscribing to our YouTube page or posting our ApplianceVideo.com site on your Facebook or Twitter account. We also have our authorized technician’s daily emailing professional advice daily to people like you that have appliance problems. We have helped thousands of people save hundreds of dollars. Thanks in advance for your help.    
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
RandyThank you for your positive comment.  Please help our ranking by subscribing to our YouTube page or posting our ApplianceVideo.com site on your Facebook or Twitter account. This will help us to continue to make new professional videos from our factory trained technicians. We also have our authorized technician’s daily emailing professional advice daily to people like you that have appliance problems. We have helped thousands of people save hundreds of dollars. Thanks in advance for your help.              
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
my issue is the opposite the freezer stays at 27 degrees the alarm does not come on and the condenser does not heat almost as if it is stuck in defrost mode. the evaporator is room temp . but everything else kicks on and off like it should. any suggestion 
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
Livinghighandwise                 All of our technicians are now answering questions daily on the ApplianceVideo.com website. You can search completely FREE in our Repair Help section. Or you can get unlimited technical advice and video links emailed to you by our 14 factory certified technicians at //www.appliancevideo.com/premium-membership/.  If you are in need of any parts please support our parts department on line at //savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks for your support. Matt Ace Appliance factory service technician.              
https://lh5.googleusercontent.com/-1v4JKi0un-E/AAAAAAAAAAI/AAAAAAAAACk/4ua34SmTuSw/photo.jpg?sz=64
Mine is doing the same thing. How did you fix?

Washer Repair - Not Advancing -Repair & Diagnostic -Kenmore, Whirlpool, Sears, Maytag 110.238121

Repair your Kenmore Top Load Washer suffering from these following issues: Will Not Advance Past Rinse Cycle Visit us at //www.appliancevideo.com ...

User Comments

https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
can you help me with a problem with my Kenmore 800 series washer it started to leave all my clothes stretched out what could be the problem
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
+C LosAll of our technicians are now answering questions daily at our //www.appliancevideo.com/ website under the Repair Help section.  We also have over 1600 common questions andanswers that you can easily search through by your model number, appliancemake, problem or error code and it’s absolutely FREE. You also have the optionto email a factory service technician with a question on your appliance at//www.appliancevideo.com/repair-help/ . If you’re looking for a repair video, youcan also search our library of over 2600 free repair videos. ApplianceVideo.comspecializes in quality DO-IT-YOURSELF appliance repair videos and we get over800,000 views per MONTH to our videos worldwide and growing. If you need ofparts for your major appliance, we have over 5-million parts in stock at //savemoreonparts.com/ .  Thanksfor your support. Matt Ace Appliance factory service technician.
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
My top loading Kenmore stopped after filling and agitating and won't advance past agitating cycle, water is not pumping out and won't advance past agitating after trying a couple of different settings. The agitator stops when I lift lid. I need help
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
+Ed Mignery                    All of our technicians are now answering questionsdaily at our //www.appliancevideo.com/ website under the Repair Help section.  We also have over 1600 common questions andanswers that you can easily search through by your model number, appliancemake, problem or error code and it’s absolutely FREE. You also have the optionto email a factory service technician with a question on your appliance at//www.appliancevideo.com/repair-help/ . If you’re looking for a repair video, youcan also search our library of over 2600 free repair videos. ApplianceVideo.comspecializes in quality DO-IT-YOURSELF appliance repair videos and we get over800,000 views per MONTH to our videos worldwide and growing. If you need ofparts for your major appliance, we have over 5-million parts in stock at //savemoreonparts.com/ .  Thanksfor your support. Matt Ace Appliance factory service technician.
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Thanks for making this video.
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
+jbiggernu Thanks for your positive comment. We are glad wecould help resolve your issue and hopefully saved you money. Please help usprovide more videos to our site by subscribing to our YouTube page or posting our//www.appliancevideo.com/ website on your Facebook or Twitter account. Ourfactory authorized technician’s also daily provide free professional RepairHelp to people like you to help solve their appliance problems. You also have the option to email a factoryservice technician with a question at //www.appliancevideo.com/repair-help/ .  Ifyou need of parts for your major appliance, we have over 5-million parts instock at //savemoreonparts.com/ . Thanksin advance for supporting us. So email us if you have any other questions ourvideos cannot resolve. Thanks for your support in advance.   Matt, Ace Appliance service technician.
https://lh3.googleusercontent.com/-vfAC7KqdudY/AAAAAAAAAAI/AAAAAAAAACY/3TOn98YInzY/photo.jpg?sz=64
I like these, good info and pace. Suggest MUCH less distracting wipe for scene change. Lasts too long, visually disturbing.
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
+DUKEofWAIL Thanks for your positive comment. On our new videos we have made the scene transitions shorter, other people have had the same suggestion. Please help usprovide more videos to our site by subscribing to our YouTube page or postingApplianceVideo.com site on your Facebook or Twitter account. Our factory authorizedtechnician’s also daily provide free professional Repair Help to people likeyou to help solve their appliance problems. Thanks in advance for supportingus. So email us if you have any other questions our videos cannot resolve.Thanks for your support in advance.   Matt,Ace Appliance service technician.
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
I have a kitchen-aid heavy duty plus top loading it's about 10-12 years old now. Every time I change the setting from cotton/towels to any other type of cycle say hand wash or perm press the problem begins but not during that load, the problems begins during the next load. It washes fine but after it fills for the rinse cycle it freezes for 2-4 hours then it works. This will happen for the next 2-3 weeks then straightens out as long as no one changes the type of load washing. This has gone on since 6 months of purchase. When I called the manufacturer they told me I could call a repair man all at my expense. I did it was going to cost more than the machine. What should I be looking for? Thank you.
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
Jane   All of our technicians are now answering questions daily on the ApplianceVideo.com website. You can search completely FREE in our Repair Help section with over 1000 questions & answers. Or you can get unlimited technical advice and video links emailed to you by our 14 factory certified technicians at //www.appliancevideo.com/premium-membership/.  If you are in need of any parts please support our parts department on line at //savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks for your support. Matt Ace Appliance factory service technician.           
https://lh4.googleusercontent.com/-NX5ChWovoeQ/AAAAAAAAAAI/AAAAAAAAAB4/Di50xMA7arM/photo.jpg?sz=64
Thank you for the awesome video! It was very informative, precise, and easy to follow. You saved me at least $100 by not having to call a repair man. The washer is working great!
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
Pamela      Thanks for the positive comment. Glad we could save you some money. Please help us provide more videos to our site by posting ApplianceVideo.com on your YouTube, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support our parts department on line at //savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks again your support.  Matt, Ace Appliance service technician.         

Whirlpool Washer Repair & Diagnostic - Off Balance load in spin cycle - Sears WTW5600SQ0

Fix a Whirlpool Top Load Washer that has this following problems: Off Balance Visit us at //www.appliancevideo.com To do this repair you'll need a Tub ...

User Comments

https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Why is my washer using only hot water? Is this a plumbing problem or something that has to do with the washing machine? Any input would help.....
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
+The Final Step          We would like to help you answer yourquestion. With our videos now getting over 900,000 views per month and hundredsof questions from people like you, our technicians are now answeringquestions  at our website //www.appliancevideo.com/repair-help/ .  We also have over 2200 common questionsand answers that you can easily search through by your model number, appliancemake, problem or error code and it’s absolutely FREE. You also have the optionto email a factory service technician with a question on your appliance at //www.appliancevideo.com/repair-help/ . If you’re looking for a repair video, you canalso search our library of over 2600 free repair videos. ApplianceVideo.comspecializes in quality DO-IT-YOURSELF appliance repair videos and we get over800,000 views per MONTH to our videos worldwide and growing. If you need ofparts for your major appliance, we have over 5-million parts in stock at //savemoreonparts.com/ .  Thanks for your support. Matt AceAppliance factory service technician.
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Whirlpool washer lsc9000pw2 we replaced 3 small springs and 1 large spring but tub still leans to left
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
+Kathy Steinbach                    All of our technicians are now answering questionsdaily at our //www.appliancevideo.com/ website under the Repair Help section.  We also have over 1600 common questions andanswers that you can easily search through by your model number, appliancemake, problem or error code and it’s absolutely FREE. You also have the optionto email a factory service technician with a question on your appliance at//www.appliancevideo.com/repair-help/ . If you’re looking for a repair video, youcan also search our library of over 2600 free repair videos. ApplianceVideo.comspecializes in quality DO-IT-YOURSELF appliance repair videos and we get over800,000 views per MONTH to our videos worldwide and growing. If you need ofparts for your major appliance, we have over 5-million parts in stock at //savemoreonparts.com/ .  Thanksfor your support. Matt Ace Appliance factory service technician.
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
My whirlpool cabrio washer bangs around loudly when in spin cycle. Iv'e balanced it adn loaded it with clothes correctly and it still bangs around. What's wrong ?
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
+marshall mcneil All of our technicians are now answering questions daily at our //www.appliancevideo.com/ website under the Repair Help section.  We also have over 1600 common questions andanswers that you can easily search through by your model number, appliancemake, problem or error code and it’s absolutely FREE. You also have the optionto email a factory service technician with a question on your appliance at//www.appliancevideo.com/repair-help/ . If you’re looking for a repair video, youcan also search our library of over 2600 free repair videos. ApplianceVideo.comspecializes in quality DO-IT-YOURSELF appliance repair videos and we get over800,000 views per MONTH to our videos worldwide and growing. If you need ofparts for your major appliance, we have over 5-million parts in stock at //savemoreonparts.com/ .  Thanksfor your support. Matt Ace Appliance factory service technician.
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Is this guy on crack!? Very reckless tech, seems to have no concern for the home owners property. Throwing tools on dryer and overall just sloppy and reckless. I enjoy watching your videos to compare to my service techniques, but a lot of your techs seem in a hurry and overlook basic common sense service practices with regard to neatness and respect to the property. Your guys are sharp and no intention to insult, just maybe a reminder of neatness and professional services
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
It's a demonstration lol. And yes he is on crack
https://lh5.googleusercontent.com/-6Jlzfx2WYZM/AAAAAAAAAAI/AAAAAAAAAHc/xnjzsDQx07I/photo.jpg?sz=64
Nice tattoo! Go Wings! very helpful!
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
Tom           Thanks for the positive comment. Hopefully we saved you some money.  Please help us provide more videos to our site by posting ApplianceVideo.com on your YouTube, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support our parts department on line at //savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks again your support.  Matt, Ace Appliance service technician.     
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
my washer is not coming out of the spin cicle. 
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
helena        All of our technicians are now answering questions daily on the ApplianceVideo.com website. You can search completely FREE in our Repair Help section. Or you can get unlimited technical advice and video links emailed to you by our 14 factory certified technicians at //www.appliancevideo.com/premium-membership/.  If you are in need of any parts please support our parts department on line at //savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks for your support. Matt Ace Appliance factory service technician.           

Refrigerator Repair & Diagnostic - Leaking water - Maytag, Whirlpool, Sears MF12569VEQ2

Service your trusty Maytag Refrigerator which has these following dilemmas: Leaking water Visit us at //www.appliancevideo.com To do the repair you need ...

User Comments

https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
I love the video. I have had a repair man here two time to fix my leaking freezer in the last 6 months. I always watch the repair man to see what they do. they never got it fixed. So I thought that I could do in myself, I saw your video it looked so easy. The one thing that the repair person did not do was the plug in the back and didn't declog the drain. So I did it took me 3 hour because of all of the ice to melt. It's been 3 months and no water on the floor. thanks keep up with these great video
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
+pat corwin Thanks for your positive comment. We are glad wecould help resolve your issue and hopefully saved you money. We have helpedmillions of people repair their own appliances so please help us produce morevideos to our site by subscribing to our YouTube page, or posting our //www.appliancevideo.com/ website on your Facebook or Twitter account. Ourfactory authorized technician’s also daily provide free professional RepairHelp to people like you to help solve their appliance problems. You also havethe option to email a factory service technician with a question at //www.appliancevideo.com/repair-help/ .  If you need of parts for your majorappliance, we have over 5-million parts in stock at //savemoreonparts.com/ . Thanks in advance for supporting us. So emailus if you have any other questions our videos cannot resolve. Thanks for yoursupport in advance.   Matt, Ace Appliance service technician.
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Thank you so much, although much drain hole was much more solid ice i ended up using a hair dryer to unclog the drain then used the hot water to clear the rest. For those of you with different shelving - here is a great video that i needed to remove mine: https://www.youtube.com/watch?v=6UB7jPvwUrw
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
+Thomas Murnane Thanks for your positive comment. We are glad wecould help resolve your issue and hopefully saved you money. Please help usprovide more videos to our site by subscribing to our YouTube page or posting our//www.appliancevideo.com/ website on your Facebook or Twitter account. Ourfactory authorized technician’s also daily provide free professional RepairHelp to people like you to help solve their appliance problems. You also have the option to email a factoryservice technician with a question at //www.appliancevideo.com/repair-help/ .  Ifyou need of parts for your major appliance, we have over 5-million parts instock at //savemoreonparts.com/ . Thanksin advance for supporting us. So email us if you have any other questions ourvideos cannot resolve. Thanks for your support in advance.   Matt, Ace Appliance service technician.
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
I called Maytag Regarding the leak on MFI2269VEM model. They agree there is a recall and there is a package to be replaced ( a new piece of 1.5 white tube or so ) but they want me to pay for the service man charge of around $200. I guess not been punished enough to listen to the wife and buy a crappy fridge from Maytag, now I have to pay for their acknowledged mistake in design as well. Good job mfs
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
+mhairiba1 I would buy it myself and install it. It will save you $150.00. Just follow our video and save yourself some money. Please help us provide more videos to our site bysubscribing to our YouTube page or posting our //www.appliancevideo.com/ website on your Facebook or Twitter account. Ourfactory authorized technician’s also daily provide free professional RepairHelp to people like you to help solve their appliance problems. You also have the option to email a factoryservice technician with a question at //www.appliancevideo.com/repair-help/ .  Ifyou need of parts for your major appliance, we have over 5-million parts instock at //savemoreonparts.com/ . Thanksin advance for supporting us. So email us if you have any other questions ourvideos cannot resolve. Thanks for your support in advance.   Matt, Ace Appliance service technician.
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
The directions in the video were perfect! The only thing I would add is that to possibly make this fix a little more permanent is to use a 12- or 14-gauge copper or alumimum wire that hooks around the coil and then extends inside the drain hole until it is about 1 inch below the opening of the drain behind the fridge. The plumber was able to wrap around the coil once and then pass it through the drain where I could feel it. We then cut the wire until it was 1 inch or so below the rubber cup that covers the drain behind the fridge. From what I have read, when the coil heats up as part of the defrosting process, the heat will help melt the ice in the drain so that it does not freeze up again. I don't know much about the new kit that is available through appliance video, but I would think it would have a similar effect as described above. I just did this today. If it doesn't work, then I will be back to post here. 
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
Florida          Great information, they do make a conductor kit that is exactly what you are talking about. That is only for problem drains that plug up more than once . Thank you for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. Please help us provide more videos to our site by posting ApplianceVideo.com on your YouTube, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support our parts department on line at //savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks again your support.  Matt, Ace Appliance service technician
https://lh3.googleusercontent.com/-xOj6GIdBkTI/AAAAAAAAAAI/AAAAAAAAA-M/FoDS6fABGGs/photo.jpg?sz=64
Great complete explanation of getting the job done ..... love it! I'll go to Appliance Video FIRST next time...... I'll be looking into getttng the repair kit so it doesn't happen again. I'll call first to see if it fits my Maytag MFI2569VEQ Model.
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
Bobby          Thank you for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. Please help us provide more videos to our site by posting ApplianceVideo.com on your YouTube, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support our parts department on line at //savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks again your support.  Matt, Ace Appliance service technician.     
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
okay so i see a patch up job here but want to know how it got like this in the first place? tonight i will do this repair but really want to know what i have to do to fix it for good. thanks. if this is explained in the video then let me know, where i am watching right now i cannot use the sound. 
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
the comment below seems to have answered this. thanks. wish me luck. i hope i dont need to call in the maytag repairman. 

Maytag, Whirlpool, Sears & Kenmore Washer Repair & Diagnostic - Timer Is Not Advancing

Repair your own Maytag Top Load Washer with some of the following dilemmas: Timer Is Not Advancing Only at //www.appliancevideo.com MAV3855AWW ...

User Comments

https://lh4.googleusercontent.com/-RVaQNlxJ7Qg/AAAAAAAAAAI/AAAAAAAAACY/AqNP6tgj3Rg/photo.jpg?sz=64
Awesome
https://lh6.googleusercontent.com/-FcB247HVeWg/AAAAAAAAAAI/AAAAAAAAABE/-_9FyEWnl1g/photo.jpg?sz=64
On my maytag washer I replace the timer but it keeps moving once the cycle ends. Also the cycles are really shorts. 
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
Bryan      If you go to our FREE repair help website at ApplianceVideo.com and post this question under REPAIR HELP, we have factory authorized technicians that will answer any technical questions at absolutely no charge on your appliance issues. This is the only website on the web that you can get questions answered by certified appliance and HVAC technicians along with over 2600 free repair videos.  Matt Ace Appliance factory service technician
https://lh3.googleusercontent.com/-Q5ZxoPYVVSM/AAAAAAAAAAI/AAAAAAAAAH4/ihzLAxshG-A/photo.jpg?sz=64
+ApplianceVideo.com I have a Whirlpool from the early 80's. My timer is hot advancing. I want to know how to repair the original timer since Whirlpool does not make the part any more. Or I wonder if there is a universal timer switch that will have the same power connections and mounting brackets? Either way let me know, we have been tapping on the dial for years now to get the dial to more to the next cycle.   
https://lh6.googleusercontent.com/-9zhipQDFSYU/AAAAAAAAAAI/AAAAAAAAAMw/FS9GsABEW-g/photo.jpg?sz=64
Humberto             So you replaced the timer with a new timer you one you ordered by the model number listed on the washer correct .
Sign up for free to join this conversation on fsaved.com.
Already have an account? Sign in to comment