Toyota cressida head gasket problems Videos

• 1. 1986 Toyota MR2 head gasket repair
• 2. 1989 Toyota Cressida 7mge
• 3. Loud Powerful Explosion!!! Head Gasket Failure on a Rotax 4-7-2013 OVRP
• 4. Head gasket and clean toyota supra mk3 1986.5 PART 2/3
• 5. Cressida 86 head gasket broke middle cylinder 5 and 6 (via YouTube Capture.)
• 6. 1987 Toyota Supra 1st start after head gasket repair
• 7. Blown head gasket or bad coil?
• 8. BURNOUT LANE-Death of the General (WATCH TILL THE END-AMAZING!)
• 9. Cressida problem

1986 Toyota MR2 head gasket repair

User Comments

itshotinhouston commented on 01 Oct 2012

It is September 2012. I have a 1985 with a blown head gasket. It will start, but doesn't stay running. Everything else seems to be ok and the car looks so good, I am thinking of having this done at a garage. Problem is, they tell me when they get in there, I should replace the timing belt, water pump, etc. etc. and they want to charge a lot for the repairs. I think I have to give them permission to do anything they want. Scary to not know the price.

Eva Gedarevich commented on 29 Aug 2011

dang, i usually go by the cheat sheet if its older then 2000 if the engine is in the back and its not a Ferrari, Lamborghini or Porsche if the head gasket is busted then junk the ride. but good job for saving this one from the bone yard. though emissions wise should it be saved? about the video- no info on how you actually did this, just showing off that you did, so that is not really helpful at all.

blytheluv commented on 03 Apr 2010

@Dustmuffins Yes, it seems to be ok. At first I thought it had not because the exhaust was loulder, and I bought a used supposedly "good" manifold on ebay. It turned out to be in poor condition with the same crack at #4 cylinder. I ended up keeping the repaired manifold after removing it and seeing it was ok. Some exhaust bolts needed tightening, and the noise quited down. It's running great.

blytheluv commented on 10 Jan 2010

I am sorry this is pretty much all the video I have of this job. I recommend the Toyota shop manual (green cover). Also, type in "Lovehorsepower"s head gasket removal" in the youtube search, he has made some very detailed videos for his 91 MR2. There is a lot of similarily and helpful hints. Let me know how it goes or if there is anything else I can help with.

blytheluv commented on 31 Aug 2011

@eva0392 I would have liked to have documented it better, but I was working in a friend's garage and felt time constrained/stressed/happy just to do the job. It was the biggest job I had attempted on a car, and I wanted to encourage others that it could be done. I could not have afforded to pay for the job, so it was fix it myself or adios to the car.

Dustmuffins commented on 05 Apr 2010

@blytheluv Thanks for the reply. That's good to hear it's running well. I've recently had a crack in my snowmobile pipe repaired and was wondering how a similar repair would hold up on a car. Granted, the snowmobile pipe is significantly thinner, and the engine runs significantly hotter, but it's nice to hear about a similar repair working out.

Corey White commented on 01 Jan 2010

Hi, I am doing this right now on a 85 mr2 and i was wondering if this was all the video you have of it or maybe you recorded more and just couldnt post it. If you do have more of it then maybe i could get you to email it to me. Thanks

DiabloDrift commented on 06 Jul 2011

O.M.G. don't work on it with the C pillar trim unprotected LOL. I like to take my major engine jobs to the car wash to pressure wash/clean prior to working on them, I'm a picky s.o.b. that doesn't like to get dirty too quickly.

Shitel Pundit commented on 28 Jun 2010

where do you live? Im thinking about getting an mr2 with a blown head gasket and need help replacing it. If you could help me that would be awesome! I dont mind compensating you either. I live in Ontario canada

blytheluv commented on 11 Apr 2010

@clube20 The engine is amazing. I was amazed the car started and ran with the blown head gasket. On the drive to my friend's garage where we did the work, water was spurting out the tail pipe!

clube20 commented on 05 Apr 2010

its not that they blow the head gasket, its that the gasket just rots away almost always on the last piston. even like that these engines keep going and going, amazing.

chase gibbins commented on 11 Nov 2012

how did you get the valve covers off, i am having trouble with mine, thanks if you reply, or if anyone tells me how to take the valve cover's off of a 1986 toyota Mr2,

blytheluv commented on 27 Jun 2013

It only cost about $150, but it was really helpful having my friend's help/garage to work in. If I had to do it again, it would probably go faster and be easier.

1989 Toyota Cressida 7mge

User Comments

ThePaperBoyMilton commented on 02 Mar 2015

What size tires and rims do you have on it?

Loud Powerful Explosion!!! Head Gasket Failure on a Rotax 4-7-2013 OVRP

head gasket and clean toyota supra mk3 1986.5 PART 2/3

User Comments

joshuae777 commented on 01 Jun 2013

this song makes me wanto vomit my own fescec thats french poor cliff burton have thoses cuntz no shame this makes me not ever wanto listen to rock shit just chicks on violin may be a cover of some santa jerked off a rain deer and misses clause aborted some elf fetuses nom iwent to alot of metallicunt shows and this was nearly as disturbing as that lars gays snre drum you must been high on glue that choice was so selfish and you cant danse lars froum genoius on one video geniuoas to asswholle

BOS357 - MIB666 commented on 20 Mar 2009

yeah elle est vraiment magnifique en noir. tu as changé la boite de vitesse aussi?? Une très belle restauration bravo

ktm84FR commented on 22 Oct 2014

je voudrais savoir qu'elle peinture vous utiliser pour vos pièce ex : boite de vitesse ect

ZiggyzWurld357 commented on 13 Mar 2011

All that, and you didn't even take the front cover off and replace timing belt?

penzoil18 commented on 19 Aug 2010

@1993TMAXX metallica - wiskey in the jar

darky savard commented on 20 Apr 2009

trop fort en plain mon char de reve :)

Alex Villeneuve commented on 19 Aug 2010

@penzoil18 thanks, and nice car eh!

N commented on 27 Apr 2011

swap gte ou 2j est l'avenir

hostess635 commented on 28 Aug 2013

Its in terrible condition

Alex Villeneuve commented on 14 Aug 2010

whats the song?

Cressida 86 head gasket broke middle cylinder 5 and 6 (via YouTube Capture.)

1987 Toyota Supra 1st start after head gasket repair

User Comments

Jason Fellon commented on 02 Feb 2015

1987 Toyota Supra Head Gasket Repair

Blown head gasket or bad coil?

BURNOUT LANE-Death of the General (WATCH TILL THE END-AMAZING!)

Cressida problem

User Comments

‫عالمنا غيير‬‎ commented on 15 Jul 2014

the engen is broplem