Hello friend I really liked your video.
But I'd get me out of a doubt.
I remove the two lines of my 1971 Volkswagen Bus plastic covers to change
the bearing on each axis, and once clean and put a new fat, disarmament but
after the four roles for alrmarlos cost me a lot when I put again the two
axes went well but then I realized that only one axis gives normal and
smooth turns the other no way to turn, the gearbox while still in neutral
only spins one not the other, I wonder if it was that arme evil axis, Or
maybe is something else is wrong.
Maybe you can help me, thanks.
Hello Alex. It sounds like your brake is dragging on one side. If the transmission was working good you will still be good. The spider gears inside the tranny work like you said. When both wheels are on the ground power only goes to one wheel. I think you are OK but having trouble with your language. Good luck my friend and just be easy when you go for the first test drive.