Magnet car question Videos

Thank you for the support

I think red is just used as a common example because it's flashy. I can honestly say any bright colored car red, yellow, orange, bright green... These cars draw my attention if I catch a glimpse of one while white, black, grey, or duller colors I just don't notice as much.

+brentd86 Exactly haha. Great major by the way! 

I was a criminal justice major and while not in Pennsylvania this sounds pretty suspect. They need probable cause or you have to break a law but I am sure if a cop follows you for 2 miles then you punch it up to 90 that the flashers are going on lol.

Very true

Thanks

That's a great deal!

Amazon

+bugaljuice Apparently you haven't used one of these.  The beauty is in the simplicity and versatility of them.  I've been using this one under my desk for over a year now.  I've taken the gun off and back on to it.  It just a firm rubber so it doesn't affect the finish.  My holster puts far more wear on the gun than this ever would.  And what support do you need to hold the gun?  That's why there is a crazy strong magnet.  The gun isn't going anywhere. 

just a bad design. useless with no support to hold the gun properly and can scratch the surface.

How so?

The minute you used the magnet spell all I could imagine was the Katamari Damacy theme.

Pretty sure shes the one doing hand to hand combat with the giant crab

"Have you seen my mother?" Pretty sure she's SOMEWHERE in that mess.

Step one: create ball of murder. Step two: walk away like a boss.

hahaha, awesome. Ball of murder. Classic

Maybe he is cravin' my mcnuggiz

dos this work with dragons

lol, that frostbite spider

Dude what the fuck!?!?!?

would be cool to see

Great comments.

the buggy is supposed to go between 30-40 mph

+nitrorcx i have asked you before..and forgot..i have a stock blaze..i did upgrade the batt pack to 1500..it did nothing for speed...what brushless set up works best for the blaze and magnet..thanks..i see u have 4 different options.

1) Top speed is about 15-20mph2) Yes the item is ready to run out of the box, the only thing it needs batteries for the transmitter30 The truck is $99.95 before shipping4) The truck drive pretty well and is quite durable but will break if you crash it hard enough5) The transmitter looks like this //site.hobbypartz.com/pimages/51C853-SavaYellow-24-Ghz/700/51C853-SavaYellow-24-Ghz-20.jpg

+WTF BBQ I got to admit, that would be good. Although I have seen a video where a guy charges 10 flat car batteries in serial without any drain on the source with a radiant energy machine, that also improves the charge capacity of the batteries. I believe he has a schematic so you can make one too out of DIY parts. But yes, it is time for a live demo, at least on a small scale

+WTF BBQLENR possibly wiped the twin towers.Nothing is perfect. Also, guy, LENR is not a 'device' man. It was an example of a technology that exists and you don't understand it so it' not good enough to you. Cmon bro read what i wrote again, pretty plz.

+RIOT LENR is an imperfect technology.  They can barely make it work with inconsistent results.  I wouldn't consider it as a successful device,  but at least,  they do have a working prototype that we can see.This guy on the video.... all talk,  no device. Like I said,  it's all hot air.

+WTF BBQ bro there are like... hundreds of working designs on the net. for real ;pU cant build one at home because you don't understand it, that's why we have the theory: to learn. Check out Low Energy Nuclear Reactions (used to be 'conpiracy fiction' just a little while ago) from the MIT and tell me if ure qualified to start building ;p Know what i mean? :P

+Hugo Mendoza You have to build a prototype so you can test it and prove your theory.  You can't just make up one in your head and claim that it works.  So,  he must have a working prototype... We need to see it working, otherwise he's just talking hot air.

+WTF BBQ it takes sources/funding to build such devices... HAVEN't we learn enough??? who is funding a ""free"" world????

+GrandadIsAnOldMan ok thank you very much even thought q contained servomotors card which is driven by pwm, now everything is clearer thanks

Hi Hermann, the two hand controllers came from cheap electric toy cars that I have used for other projects. They contain 2 AA batteries. Press one button and the current flows in one direction down the wires, press the other button and the current flows in the opposite direction. That meant the original cars would go forwards or backwards, but no steering option. I used one to drive the car forwards and backwards. I used the other controller to drive the servo forwards or backwards.The servo was modified by removing the circuit board from inside (That normally decodes the signal from the rc receiver), so the hand controller wires were soldered directly to the servo motor. There are several videos on YouTube showing how to modify servos, just search for 'modify a servo'.On the side of one of the controllers I simply hot glued an on/off switch to operate the electromagnet.

You are welcome, I actually sat down to make something completely different, I found these parts whilst looking for other stuff and remembered your request. I would have done a full build video but didn't think about it until I had nearly finished. Winding the wire round the ferrite core took the longest and I probably didn't use the right gauge of wire as I needed two 9v batteries to get enough power.Here is another video I have just found on YouTube //youtu.be/Ddpm-lOOzis

Happens all the time, but I usually edit those bits out :-)