Enter your query, example: how not cry when slicing onion or how to enter an Free Italian Sex Webcams?
2002 honda civic roll cage Videos
- 1. Project Import: Custom S2000 Roll Cage SCCA Approved TIG welds
- 2. Building my First Roll Cage Update 2 - Jacob Herzog - Bmw E36
- 3. Subaru Impreza Roll Cage Fabrication
- 4. RAW 2013 Pikes Peak Run with Toshiki Yoshioka SUBARU BRZ (ROLL CAGE CAM)
- 5. Installing a roll cage in the Neon
- 6. Honda Civic Mosport crash October 14, 2013
- 7. MY99 WRX Rollcage Install Part 2 - Rollcage installed and priming
Project Import: Custom S2000 Roll Cage SCCA Approved TIG welds
Custom roll cage we just finished up in another s2000. 8 point cage all tig welded. from firewall to trunk design. used roughly 80 feet of 1.75 x .120 chromoly ...
Building my First Roll Cage Update 2 - Jacob Herzog - Bmw E36
Second update on my e36. Got the floor plates welded in and the main hoop bent. the down bars are cut to size, and the door bars are bent up. I also fixed the ...
User Comments
Nick Bayati
commented
on 21 Jan 2015
Cool project dude. I would look into serious sanctioned body tech
requirements for cages before you attempt the cage. The spot you pointed
out for the rear downbar mounting location looks like nothing more than a
firewall. You need a solid location which is usually the shock tower. I
know GGD allows the rear down bar to be mounted to the wheel well but I
would aim for the shock tower if I were you. I'm pretty sure your current
mount location won't allow you to pass tech since it has no real structural
rigidity.
Jacob Herzog
commented
on 22 Jan 2015
Tanks! Ya thats what I thought too but Julian DuMays cage is going to that spot and he call cortex at Sonoma and asked if it was ok to go there. And they said ya, and he passed teck. I guess it holds the back seat in and is considered a structural part of the car. On E36's you cant go to the shock tower because its in the wheel well. but ya I already cut the tubing for it. Honestly it just a wednesday night car so ya.
Logan C
commented
on 21 Jan 2015
Would love to see a walk around of the e28. Always liked that body style.
Jacob Herzog
commented
on 21 Jan 2015
Ya I meant to film a vid of that today but i ran out of time. I should have one up in a couple days. I love that body style as well!
Subaru Impreza Roll Cage Fabrication
A little clip I made of a few hours of TIG welding the roll cage and cage feet in my 96 Subaru Impreza rally car. All notching, bending and welding done by me.
User Comments
Mark Pikas
commented
on 17 Nov 2014
What are the 2 light sources that you're using? I usually find it helpful
to have good light when welding and I don't have an arc lit, but often
something bright enough to work well is bulky enough to be in the way a
lot.
Boostin4urMom
commented
on 18 Nov 2014
I used a large drop light above everything as you see but for up close I used a magnetic LED light that was small and didnt get in the way. Being able to see what youre doing as well as watching the puddle Absolutely necessary for a good weld
damiandrifts
commented
on 27 Oct 2014
Did you cut holes in the floor pan so you could drop the cage down to weld
the top of it? Im planning to build a cage myself and would rather use
chromoly tubing and tig weld it but couldn't figure out how I was going to
weld the top portion in the car
damiandrifts
commented
on 27 Oct 2014
Thank you. It will mostly be a street car with spirited mountain driving and some track use. I wanted chromoly for the weight savings, but safety and quality are far more important to me than weight. Not sure what you meant about the boxes but I'm definitely taking a look at the build thread
Boostin4urMom
commented
on 27 Oct 2014
yup that how I did it. I did it that way because I didn't want to remove the windshields and roof skin. You have to make boxes on the floors to mock up the bars to raise them off the floor so you have room to cut the holes. when its all mocked up you tack it together and drop through the floors. If you are building a cage for rally I wouldn't use chromoly. First of all it is illegal in most sanctioning bodies and second it isn't as safe as DOM steel against tree strikesheres my build thread if you want to check it out//www.dirtyimpreza.com/forums/showthread.php?31083-Flat4Rallys-RA-spec-cage-build
ItsaRikkityRak
commented
on 02 Apr 2014
Looks like it's gonna be a nice cage. Nice music choice too.
Boostin4urMom
commented
on 02 Apr 2014
thanks man I appreciate that
RAW 2013 Pikes Peak Run with Toshiki Yoshioka SUBARU BRZ (ROLL CAGE CAM)
The HANDICAM DIARIES is a short in-house documentary video following Toshiki Yoshioka as he challenges the 2013 Formula D and Pikes Peak season in his ...
Installing a roll cage in the Neon
Rice, rice, rice. Also super loud music and awful narrating. The music I couldn't stop from being really loud. Also I had the volume up for the narrating all the way ...
Honda Civic Mosport crash October 14, 2013
Skip to 0:55 The Civic driver had no injuries. I was passenger in my neighbour's 2001 Acura Integra Type R (B18) The Integra is completely race prepped and ...
User Comments
judges69
commented
on 20 Dec 2015
Hey bro, did anyone tighten the lug nuts? Ya I think so.
judges69
commented
on 03 Jan 2016
Hey was just joking, glad it was not worse or the guy behind you getting caught up in it as well.Glad your OK.
AustinF12
commented
on 25 Dec 2015
+judges69 I can assure you all 4 lugs were still on the wheel when it came off. The whole axle or wheel assembly came off along with the brake rotor still attached to the wheel.
MY99 WRX Rollcage Install Part 2 - Rollcage installed and priming
Photos of my wrx buildup.
Sign up for free
to join this conversation on fsaved.com.
Already have an account? Sign in to comment
Already have an account? Sign in to comment