JAGUAR XK150 "S" 1959 IN MEXICO CITY, STUNNING RIDE!! (ORGULLOSO DE.)
2012 Jetta mk6 retrofitted with OEM LED Taillights for RHD/UK
2012 Jetta mk6 retrofitted with OEM LED Taillights. No error codes. Previously byte 18 in CECM was set to 8C but would receive two check bulb errors for right ...
Hello, I'm guessing you have a north american/south american mk6 Jetta
where the brake lights are also used as turn signals? My Jetta is a euro
spec and comes with 4 pin non led tails. The LED tails came with a 4 wire
adapter to to work with the stock connector on the car. Meaning both the
stock connector on car and LED tails had 4 pins. My Jetta also has a rear
fog light. This might also explain why 4 pins are used vs 3 pins possibly
because you don't have rear foglight?
Hello, I have already get these lights to my jetta. I realize there's just
3 pins on the outer current tails meanwhile LEDs needs a 4 pins input.
Besides the changes you mention, it is necessary to change the wires in the
tails? Most of the videos loaded in YT does not show the yellow turn around
light. Thanks in advance for answering my questions.
Thanks! I bought the lights from carsystems.pl If you go there and check
under taillights for VW you will see the led tails as well as another
listing for led adapters. I can't post the link directly in youtube
comments apparently.
I finally have my LED tail lights installed!!! I build the adapters and now
are done. I wonder if you could share the VCOM sequence you made for the
yellow turn around lights. Thanks
Thanks a lot! I realized that I need the 4 wire adapters since I got the
led tails without them. I am searching for them. Your car look awesome with
that lights!
Clientes Satisfechos | Toyota Pachuca | Toyota Hiace Ventanas 2015 Blanca
Entrega de unidades en la agencia de Toyota Pachuca de un Toyota Hiace Ventanas 2015 Blanca Visita nuestra página, sé parte de nuestra Familia Toyota ...