Volvo xc90 bcm repair Videos

Dear authorized person, I'm Serdar OKKALI. I am writing from Ankara,TURKEY. I have a few questions about my BCM and your system. I have a 2005 Volvo S60 car. ABS pump always works but i see some errors in my error screen. The errors are brake system error, ABS error and engine system error. I attached my BCM system's photos. My car has DSTC. If i send you my BCModule , can you repair it and send me as plug and play mode. How long does the fixing take? How much i have to pay? Best regards,

Thanks for the post. Very helpful. 

I have the same problem on my Volvo s80 the instrument cluster. Sometimes it starts running a series of numbers then sometimes works or goes on and off now it's completely off. But shows the service light on the left of the instrument cluster. Are you saying I should take it out and de-solder the voltage regulator and replace it? or should I de-solder the voltage stabilizer and replace it? Or should I just rub some flux around them and re-solder? or maybe replace bulbs? How do I know what needs to be fixed and what does not? Thank you

witam, skad zdobyc taki fajny mikrosokop?

Probably too late to tell you now but what you do is this, buy a another good working gauge cluster they are relatively cheap at junk yards, send both in to a company that will take the software from the bad one and put it on the good one. This costs $200

Is their other way to purchase a ETM i try using my bank but they wont drop my security 

Why is that people state you must take it to Volvo for coding or in XeMODex's case "clone" the ETM but many other people online buy used ETM and XeMODs and say they just slap them in and go? Is it because they got a unit for their exact model/year?