NVX Sound System Install For Tesla Model S "D" (dual motor)
For more, please visit: //evannex.com/products/nvx-b-o-o-s-t-powered-loaded-enclosure-package This is our second installation video for the NVX B.O.O.S.T ...
+G Sebron The kit was engineered by the President of the company (at NVX, who also owns a Tesla Model S). He was careful to design the system to pull sufficient power for more robust bass in the vehicle, however - not so much that it would have impact on range. From our experience, having owned and tested the system in our own 2012 Model S... we have found the impact on range to be negligible -- even if we have the system cranked for long periods of time. Although we have not tested this using any instrumentation, it has been installed in hundreds of Model S vehicles who have never (thus far) had any issues and/or complaints re: range. It's so popular partly because it was designed specifically for the Model S. We have a lot more specifics on the product at://evannex.com/products/nvx-b-o-o-s-t-powered-loaded-enclosure-package
Hello
First of all I want to say that both this and your previous video is a very
good instructional video. This will make it so much easyer for me on my
P85D project.
Thanks a lot for sharing this video!
Just one question: Why are you tapping into the high level side from the
factory amp? Isnt it possible to tie in to the low level side? I plan to do
this since I'm going to mount my 6to8 mosconi DSP. I'm hoping there is a
full range low level signal that isnt run through a crossover ( I want to
do all my adjustments myself)
+EVannex You are welcome :) ( Edit: reposting my last post, used wife's account :p )Did you see my question below my last comment? I see that youtube hid it. Will it be possible to tap directly into the low level side of the factory amp?
+Heidi Christin Fallsen Not sure on that one, please visit this page and inquiry through the contact form -- they'll forward it to the tech on-site to make sure they get you the right info://evannex.com/pages/contact-us
+Trustno179 Thanks for the kudos, much appreciated :)
How-To Add Lights to HO scale vehicles - Model Railroad
I'll show you how to install the Woodland Scenics Nano LED's into a HO scale vehicle. I'll also demonstrate how I add a driver inside the car and a neat way of ...
+Terry Markowski lol, I got this one from Germany,//www.modellbahnshop-lippe.com/produkt/Busch/44-4-000-229155-013001-0-0-0-0-0-0-0-gb-h-0/produkt.htmlIt's sometimes difficult to navigate the site but the service was good and the vehicle arrived in under 10 days from the time I ordered it which I thought was good considering how far it traveled!You can find them on ebay as well.Hope that helpsCheersLuke.
Hi Luke,great vid,these lights are great ,I just bought a pair of white
nano's to see how they go without the hubs,turned out you don't need the
hubs or power supply,I just snipped of the plug bared the wire and conected
straight to the track bus,they work great but no dimmer,meh?
+Jon Blakeney yeah I thought about that too, I really like the dimmer though. I looked at Jaycar for a dimmer circuit a while back but it was quite expensive. I'm starting another lighting video at the moment where I make a small modification to the lights. Should be good I hope.CheersLuke
+Leonardo Pano I plan to do quite a number of videos but I'm not sure yet about RC in HO scale. It seems quite expensive but you never know. It would be very cool!CheersLuke.