Refurbished iphone 4 wikipedia Videos

+Bruce Cheaney I really do like mine though...

+Darrel Wilson The Cowboy CB-3200 will do the job just fine and save you some $

Ok thank you I wasn't sure if needed to put additional full piece skirt on too where the filler material was sandwich between the two pieces I'm working on my first saddle I have been watching your videos on saddle making and spur making and have learned a bunch

+Chris Wagoner I have an older clip showing how to fit the skirts in a roping saddle. You can see where I formed the skirts around the bars of the saddle tree. You can easily make two patterns for each side that are 2" larger than the saddle skirts and go nearly to the bars and feather edge or shave them so they are smooth on the bottom side. Glue your skirt fillers inn and leave the excess sticking out until you sew your sheep skin in and then trim off the fillers and sheepskin. Bruce YouTube video clip on fitting skirts https://youtu.be/NZrth-wI-5s

+masinski kutak Thank You. B.C.

Thankyou for the info sir.

+Kenneth Halianto White 346 polyester I get it from Weaver Leather. Bruce

Thank you! You have such a nice sewing machine but..your skills are just..WOW!

+Ciobanu George 1/4" to 3/8"

+robert perrotta I must finally stress though that I meant the stitching pattern and never meant his work at all. I should refrain from using the word in future. My apologies. Stay cool.

I got ya, I didn't realize you were from another country. I read that comment to mean his work looked like garbage, that's what rubbish means, at least here in America. It just upset me. No worries.

+robert perrotta Nope. Not being in the US ( and having 11 official languages where I live :(  )  and leaving it up to the reader  to decipher the writings sometimes comes out seriously wrong. The last thing I would do/want would be to criticize anyone`s attempts. EVER. In the late sixties I would have been put off if someone had made other than tolerant remarks about what I was doing. I apologies profusely to the gent if it caused any badness as I was CERTAINLY referring to the stitch pattern and NOT the actual work at all. Sorry mate. We love you :) I referred to the NEEDLE FEED not as to how the work is fed through but the fact that the Needle With the thread is what creates the hole for the stitching to pass through to make the lock. I didnt say it right I guess. I understand the compound feed as I had the Ferdco and the Adler before as well. As far as prts go having had these for some 40 odd years I really haven`t found any problems with replacement parts from NYC or Youkam ( where CBMC is now situated) They have been able to help in all instances. Hope this irons out the creases somewhat. Im sorry for the input that came out bad on the other end of the line. I am always eager to speak with stitchers around the globe as I spent so much of my youth trying to find an answer. Take care. Lindsay

The Juki 441 and Adler machines aren't needle fed but are triple compound feed walking foot machines. I agree with you in that the old Randals, Landis and Unions make a beautiful stitch. But buying parts for them is next to impossible and unless you have a mechanic with a machine shop fixing broken parts just cant be done. I love those machines but I love my Juki clone as well. You would be suprised at the differnt stitches these machines are capable of making with the right needle. Anyway, it just came off like you were insulting his work and the craft.

+Lindsay Ross Hi. I think this got lost in translation somehow. I didnt mean to offend or criticize anyones craft. And "rubbish" referred to the stitch that Needle machines make. I was referring to the on going advertising about the Needle Feed Machines and also defending my soul against the ( what i took as abrupt personally aimed comment about my age........ which had nothing to do with the machines we were discussing) comment. The concern I had is that the needle feed machines just dont have the stitch p[attern the N/A machines do. making a hole with the thread attached and then dragging the bobinn thread up throught that hole means that you would need a needle of substance to be able to make a hole big enough to have all that happen. The needle awls dont do it that way and thats why the pattern is so much better. A very small hole which makes for a tight stitch without wet moulding needed. I think you are up the wrong tree here mate. Dont always judge what you are unsure of otherwise you could end up looking wrong! I have been doing this "professionally" since 1976 and have 3 Cambells and 3 Union Lockstitchers ( one from the Amish saddle makers and 2 from Randall when they were in NYC.) The Campbells all came from CBMC when they were in Fort lauderdale. I had a Ferdco Bull which I eventually gave away through frustration.The factory just couldnt get it right and changing the bobinn so often was not on. So at 65 and having had as much experience in this field as I can imagine ( learning how to retime Unions etc) I would say that your comments fall short. I know all about these through experience. No other stitchers will do that job. I have a life mate!

+robert perrotta

Lindsay Ross, I have seen you comment on other leatherworkers videos about the needle and awl machine, you referred to one gentleman's work as "rubbish". I am going to venture to say you know nothing about the leatherwork craft, nor very much about the old Landis and Union needle and awl machines. Those machines are wonderful, they make beautiful stitches, the thing is, they are no longer in production. Finding and maintaining one is VERY expensive. They are big, loud and in most cases just not practical. The newer Juki 441 clones or Adler clones are perfect for their intended jobs, they make a beautiful stitch and 90% of us who ACTUALLY work in this field and produce any volume of work, use these machines. No need to belittle anyone's work or act like you are an expert on the subject... it is irritating, your comment on the gentleman's page who made a cartridge belt slide really irked me, then I see you commenting here once more about a machine and field you know nothing about... get a life.

+Сева Карпенко HDMI

сорри, с pptp не сталкивался ни разу, у меня ip статический и белый (тобишь из инета до него можно достучаться) и всегда достаточно в конфиге или веб-интерфейсе прописать ip,шлюз, dns и тд, так что от себя кроме предложения пойти в google я сказать не могуP.S. Я на Raspberry Pi на втором пилю медиацентр с системой голосового оповещения с помощью Google TextToSpeech.

+Сергей Мельников Подскажи лучше по OpenWrt. Прошивку то я залил, а вот соединение по PPTP поднять не могу. Прописываю пароль, сервер, а соединения нет.

+ChinaLand Channel а если серьезно, скинь плз мануал доходчивый про Asterisk

+Сергей Мельников И то, и другое :)

ты сисадмин чтоли АТСки пилить? или из спортивного интереса?

На нём был установлен и настроен сервер Asterisk в качестве миниатюрной АТС с возможностью совершения GSM звонков. А теперь лежит у меня в шуфлядочке :)

+Просто Просто Кто согласен ставим лайк!

согласен!Прям в точку!Я на Windows XP сидел 4 года!Потому что она мне нравится !Самая лучшая у Майкрософт!Ну так вот я сидел на ней 4 года,не для таво что б сидеть на микрокомпьютер еще с такой установкой!НЕЕЕЕЕЕЕт!

нет, Линукс распространяется абсолютно бесплатно, на сайте Линукса (причём легально)

Спасибо за отзыв!

Это фокус,лол

У меня тоже

+Peppa Pig Я думаю, нажать на кнопки режима громкости , если они будут "щелкать" как сказали в видео , он скорее всего оригинальный.

А можно вопрос за сколько ты его купил ? Я хочу купить себе БУ за 7000

+Николай Костенко У нас в городе , чтобы посмотреть телефон его открывают и в руках показывают , что к чему.

В Связном или Эпп Стор

+Александр милушкин если гривен, то скорее всего стоит) Ты проверь всё равно :)

+Dmitry Smirnov 2800 грн

За 2800?Б/У?Китаец же 100%.