The seals on the valvetronic motors looks like its leaking a fair bit which
if bad enough can be a vacum leak which will cause these motors to misfire.
As well as your oil cap seal.
The ccv valve diaphragms also fail which causes rough idle and
stalling...easy fix.
And for god sakes clean your engine bay all that dust is horrible. And all
the leaves
good eye, I actually just replaced the valvetronic motor o-rings (motor to base and base to valve cover) and the CCV a couple days ago. It was still misfiring so I'm thinking(hoping) it might just be a coil. The plugs are new, so I ordered a new coil to swap around and see if I can locate the bad one.
2015 Chrysler 200 rough start
This is an issue that I have since I got the car. Randomly the car won't start properly.
2015 Dodge Dart 2.4L Automatic Review
2015 Dodge Dart 2.4L Automatic The 2.4-liter four springs to life with an adenoidal exhaust note. The tone improves with rpm, but burdened by the Dart's 3244 ...
Top Speed Run (0-120mph) | 2011 Chrysler 200 Touring
2011 Chrysler 200 Touring Sedan. 3.6L, Pentastar V6 Engine. Traction Control off. (See bananaboy81's video with traction control on.) 0-60: ~ 7.0 - 7.1s 0-100: ...