HOW TO INSTALL TRIANGLE-AWAY ON SUPPORTED ANDROID DEVICES
specially made for Ojus Rane...... DOWNLOAD LINK: //forum.xda-developers.com/showthread.php?t=1494114 if you want proof........just reboot your device ...
How to use Triangle Away app to reset the flash counter on the Galaxy S3
How to use Triangle Away app to reset the flash counter on the Samsung Galaxy S3 Requirements for the Verizon S3 Root Unlocked boot loader Link to XDA ...
+Rootjunky.com Good day! I'm currently planning to install a custom rom on my Galaxy Core GT-i8262.I've already installed the CWM and quickly wiped and factory reset as it says on a guide I've been following.Odin3 passed soo I've disconnected my device and turned off my phone. Now it only boots with CWM and I cannot install Triangle Away app. The triangle always shows up.I hope you guys can help me. Thank you!
Hey I just got the paid one and when I opened it up it said I don't have
magic head and I don't have root or a supported device I'm running android
4.4 using nexus 7 2013 WiFi model and I have root. What should I do?
Hello I need some help out there. I don't specifically understand the
meaning of Root and Unroot. Allow me to explain my problem:
- I Have a Samsung Galaxy S3 I-9300 - The Device Status says: Modified
- I want to do a Software update but it says: "Your Device has been
modified. No Software Updates available".
- The phone came from a foreign country and to use it, network unlock is a
must (I don't know if it is a helpful info)
- Concerning the phone status in Download mode (Odin mode), this is what
appears:
Product name: GT-I9300
Custom binary download: No
Current binary: Samsung Official
System status: Custom
I need to UPDATE MY ANDROID SOFTWARE. All my apps are up-to-date but the
phone is heating up too much and the phone freezes, lags,etc...each time i
use more than 3 apps...
Also there is this pop up that appears a lot of time saying: Shell has been
granted Superuser,etc....and then my phone just freeze and i have to remove
the battery to make it all ok...temporarily.
My android Version is 4.1.2
I am Open to any suggestions or tutorials...
I only know after watching so much tutorials that i should not Brick my
phone.
Please i'm asking for Help. You can contact me anytime.
Thanks beforehand.
Reset Flash Counter TriangleAway / Triangle Away Samsung Galaxy S4/S3/S2/Note/Note 2 This video will show you how to use the app TriangleAway to reset ...
HOW TO Root and Install Custom Recovery CWM on Samsung Galaxy S3
First off, before you do anything, read all you need to know about what you're about to do here on XDA Developers: ...
I'm using v7b (beta so its slightly different from the official v7 release)
The main changes are touch wiz (from SGS3) has 5x6 grid. so slightly
tighter for more icons on screen. S-Note isn't installed, so if you do a
clean install then you will lose it. But its possible to install it
yourself. (not that hard to do) and a transparent weather widget. There are
a few other changes but they are minor and you would probably not notice.
I've never come across that error. If it were me in that situation i'd
clear cache and D-cache and all user data/ factory reset, then flash
rocketROM v4 and then RRv7 overtop. Reason for the rr4 and then 7 overtop
is because of S-Note not being included on version 7. so you would have to
do a custom installation of note and its lib settings.
When you install this rom, does it appear how we are seeing it, or have you
added that clock and those tiny widgets to the homescreen? if not what are
those nice widgets. iam a newbie and iam rooted, iam on ICS 4.0.4 and ive
yet to flash a rom but i do like how this phone is set up. please let me
know when you can. ive subbed! cheers
just flashed v7 final, fast and stable, but anyone can tell me how to get
rid of that wake lock called l2_hsic? i tried the airplane mode method and
unplug the charge when turn the screen on, but still, it sometimes work,
sometimes this l2_hsic really prevent the phone from deep sleep, hope
someone can help me, thx!
i flashed the v6 to v7, but it was happened already on v4...this wake lock
just won't go away, tried search in XDA, some people got that but can't get
rid of it...and i did wipe everything to install the rom...and did it three
times already..this wakelock still here....
Hey... I use Apex launcher, and backup the 'Apex desktop' and 'Apex
settings' in the launcher itself. So when it boots if its not the same as
before, i do a restore and its good as new. (Only works if its not a clean
flash as your widgets and apps are removed)
No thats all after market widgets. first one is clockQ. you can modify it
to change the scale and rotation of the clock. next one is batery monitor,
has temperature/ battery level/ SD card space. Next is a google search and
the last one is itunes remote.
Yeah... i tried speedmod with the previous version, and found it not quite
as stable. (especially with internet searching and force closes) plus, you
get a better score on quadrant and Antutu... almost 1000 points better!...
stick with this one
very nice review, but i keep the original kernel, the speedmod kernel give
me lag , the original one give me much smoothness, but i have to admit the
speedmod kernel give a bit more battery life
- Flash Abyss - Reboot into recovery - Three wipes: - Go to mounts and
storage: - Format /cache: - Format /System - Format /Data - go back and
clear battery counters - Flash RR V7 -Reboot
Please note... This will delete everytthing off your note, and you will no
longer have S-Note or any other premium app. (I can walk you through step
by step to install these back on)
Just a quick video on how to root the Galaxy S3. 1. Download the required files 2. Unzip 3. Open up Odin3 v1.85 4. Add CF root file in the PDA box 5. Put your S3 ...
Please i need hel for my galaxy s3 I was rooting my mobile but i found a
problem and i saw this message "firmware upgrade encountered an issue.
please select recovery mode in Kies & try again" How to fix it ? please help
bro i have some problem after updating to 4.0.4 , the indian frimware , am
not getting the restart option in my phone , actually when we press the
power button , we get 4 options 1.switch off 2.restart 3.mobile data on/off
4.silent/vibration/sound am not getting any option tab while i press the
power button , and if i hold the power button for 4-5 seconds , the phone
turns off , i have degraded from jelly bean to ice-cream sandwich 4.0.3 ,
any suggestions ?
Hey man!! Please help me out here.. !! I'm in India and I have Samsung
Galaxy S2 GT-I9100 (OS Version: 4.0.3), Baseband Version: I9100UHLPG Kernel
Version: 3.0.15-I9100XXLPQ-CL223505 I have rooted my phone and now i need
to unroot it. I could not be able to connect my phone to PC KIES. It just
says "Unable to connect.Failed to retrieve" So i could not update my
android version. Can you please help me out!!
hey man i need need ur help , I have galaxy s2 shw m250s , once i'd
converted it to gti9100 and then installed jelly bean from gingerbread. i
found that its imei was corrupt now so i tries many things but nothing
worked. while flashing it one day the phone got unplugged and now its not
even starting .. no sign of power in it ... not loading even in recovery
mode.. Please help me ... thanx in advance
TechFanBoy97 i tryed rooting it back to stock by following your steps it
started to do the process then it stopped and i was left with the firmware
message. firmware upgrade encountered an issue. Please select recovery mode
in kies & try again. My samsung galaxy s2 is on THREE network but is open
to any network and it is I9100XWLPY and running 4.0.4 ice cream PLEASE HELP
TechFanBoy97.
i tryed rooted my s2 using odin came up pass but when it was meant to
reboot it got stuck on the screen with the yellow triangle I9100XWLPY 4.0.4
Can you show or tell me step by step how to solve this problem and then
tell me step by step how to root my samsung s2 I9100XWLPY cos you sound
like you know your stuff mate even when you are not well keep up the good
looking out homie !
Hey thanks a lot for this simple guide to unroot. Do i have to do the
factory reset even though i didn't have any issue after putting back the
custom ROM. For me everything went on well and phone booted without getting
stuck at samsung logo screen. How do i remove SuperSU from apps? Because
the phone won't let me remove as it says its a system app! How do i
remove/uninstall it?
hey, i would like to unroot my galaxy s2 to stock as my screen is dying and
i would like to send it to three for warranty... what firmware do i use? im
a noob at this xd my galaxy s2 is GT-I9100 Baseband Version-I9100XXLPH
Kernel version- 3.0.15-I9100XXLPH-CL118559 se.infra@SEI-45 #3 My network
provider is THREE United Kingdom
Would you know why my Galaxy is not starting up? My kids were playing on it
then must have pressed the buttons to do a hard restore to factory settings
then my son took the batterie out and now only the Galaxy logo comes on it
want go past that Ive tried restore factory settings then rebooting and it
still won't start up!
please ,, i had anderois 4.0.1 and i really wish to get it back ... but i
updated my s2 with kies ... and now its the last version ok anderios ics
please is there any way to go back to the 4.0,1 again ??? because i dont
like this new version at all:( hope you can explain to me what to do please
While upgrading through ODIN, the process stuck at "NAND Write" so I
switched off the phone. Then, I got stuck at "firmware etc..", basically is
bricked. I tried to unbricked through various forums, but not successful at
the moment. Please help me.. (Phone: Samsung Galaxy S2 i9100G on ICS)
After trying to upgrade to Jelly Bean my phone is stuck with this message:
"Firmware upgrade encountered an issue. Please select recovery mode in kies
and try again." My phone is SAMSUNG S2 GT-I9100G. Please help. I did it
with odin and my phone was not rooted.
I was running Resurrection Remix but it made problems for one of my apps,
and it was recommended that I install Cyanogenmod instead. I flashed CM9
(stable), but then on reboot, I only get the cyanogen flash screen, and
cannot boot into recovery mode. Any ideas?
hey @TechFanBoy97 i have open my s2 in donwloading mode and after that is
remove the cable and swtich off my phone. So tell me how i can get into
"recovery mode via kies" because my phone is saying to do that and And Its
Stuck there. Plz help me out plzzz
What do i do if i cant find the correct formware for my contry?....i can
only see Denmark "three" (not my provider, i need an unbranded for warranty
issue).........cant i just use for exampel the one for Sweden and just
change the language when booting?
Hello... I updated my GT-I9100G to ICS 4.0.4 and my boot screen popup
several times and then come home screen normaly. So Is there a solutions to
that or should I downgrade to 2.3.6. But I cant go to download mode or
recovery mode.. Please Help me
@TechFanBoy97 the same thing that happened to @TikianaMinecraft happened to
me, i did everything you did but now it keeps rebooting and I can't even
get it into recovery mode to factory reset/wipe data.....i have the samsung
s2 LTE btw
How to root after I unrooted it like in the video ? I unrooted with: Galaxy
S 2 GT-I9100 SWC I9100BULPG 4.0.4 13.09.2012 1056084 Now my Kernel is:
3.0.15-1056084 dpi@DELL131 #3 SMP PREEMPT Thu Sep 13 10:45:25 KST 2012
Please help me :D
They're basically all the same, except for countries/carriers with specific
apps/layout :) But your phone will not brick or anything ;) Which country
do you live in? If you tell me I might be able to help you find the right
firmware ;)
seriously man love you for your help you saved my life they gonna charge me
40£ to recover my pictures and everything because my phone was not working
at all but thanks to you i have lost my apps but saved my pics and videos
love you
Thank you very much for the video, really helped me. Only one improvement
tip: while flashing, cut the video so we dont have to skip forward in the
video and maybe miss something interesting/important you say while its
flashing ;)
I live in Denmark too and my phone is from Telia, I've checked another
Galaxy S2's from other providers and they all have the same firmware. Email
me at [email protected] and I will send you the right firmware file :)
That list is not helpful. I typed in my baseband version and downloaded
what appeared to be the correct version, yet somehow It's now displaying a
3 mobile network splash screen (when Im on o2) and does not work. At all.
i m having samsung galaxy s2 with android 4.1.2(unrooted ) and it drains my
phones battery just in 2 hours without any usage and now i want to
downgrade it to 4.0.4 can i use the same method for that also
Why stock ICS? The latest version is Android Lollipop and the stock is
Jelly Bean. You should try Android L and Jelly Bean. It's great but, thanks
anyway. You saved my SII.
GUYS PLEASE HELP in my phone , it says baseband version : I9100XXLPX kernal
version : I9100XXLPW which firmware should I choose to unroot ?
Easy Zippered Box Pouch Tutorial
Subscribe for more great tutorials! //bit.ly/MelanieHam More simple sewing tutorials here! //bit.ly/simplesewingtutorials This is an easy, beginner friendly ...
LOVE your instructions. Very easy to understand and I love how my tote
turned out!! I added some embroidery to mine, and as soon as I get home
after work today, I have two more ready to stitch together!!
+Melanie Ham I'm not able to with the machine I have at the moment. Completely forgot that little detail but it makes a big difference. So sorry about that and thanks so much for answering me your bag looks awesome.
Hoping someone can help me. I finally tackled this and it looks pretty good
for a total beginner, however not sure what I did wrong, inside you can see
all my seams and they look bad!! LOL
+Ingrid Holmberg I hate seeing the seams too. you did not do it wrong. the are suppose to be exposed. the zig zag stitch covers it and helps prevent from unraveling. There is another way to make the box bag where the inside is completely free from exposed seams (it's just twice as much work) //www.pinkxstitches.blogspot.ca/2014/01/boxy-pouch-tutorial.html?m=1
+Jillian Vest the same thing happened to me! I followed along very carefully! I ended up covering up the bottom seam with some binding sew-on by hand. I HATED seeing the seams! Boo!
How to install CyanogenMod 10.1 Android 4.2.2 Jelly Bean on the Transformer Prime
PLEASE CLICK "SHOW MORE" --------- Please Subscribe: //tinyurl.com/wwjoshdew If you Subscribe, you won't miss any new videos! XDA Thread: ...
Great video as always! Question... Have you ever experienced an issue where
the dalvik rebuilds itself on each boot up after flashing something like a
kernel or mod? I've had major issues with that in the past and that is the
ONLY reason why I also back up my cache along with the system, data, and
boot so that way I can restore my cache in case that issue occurs after
wiping it in order to flash whatever it is I'm trying to flash.
Hey Josh..... your videos are great, but I'm having issues at the point
where i try to flash a rom (really actuall any ROM...not just CM10.1 ) with
TWRP 2.5. I've managed to update to the stock JB 4.1.1. currently with
build JRO03C.US_epad-10.4.2.15-20120917. Kernel is 3.1.10 SMP Preempt.
Basically when I flash in TWRP, I get the message "E:Unable to open zip
file". Any ideas what I might be doing wrong?
Hey, Josh, you said you would do a vid on Official 4.2 when it came out. I
realize now you are on the Prime and not on the Infinity so no worries. I
need to follow your NVFLash video on my TF700 so I can get my unbrick/out
of jail card and then I will load Official 4.2 and perhaps try my hand at a
video as I can't find any reviews on stock ASUS 4.2 for the TF700/Infinity.
and then when I don't talk and I just do things, people bitch at me for not
explaining anything. I will NEVER win this battle. Like I should do two
versions of every video. One where I fly through things really fast without
talking (for people like you) and one where I slowly do things, explaining
each step (for everybody else).
TF300T's, TF201's and TF700's all come with android 4.0.4. so i guess he
updated it automatically on his own. i don't understand why people upgraded
their transformers from 4.0.4 to 4.2.1. if it ain't broken don't "fix"
it... and oh what a fix 4.2.1 is, it is a transformer killer god damn -.-'
Lots! Backing up your progress in a game like Angry Birds, Need for Speed
Most Wanted, Asphault, and etc.... and then restoring that data on another
rooted android device and picking up RIGHT where you left off. Installing
roms that make your phone faster and etc.
Hey josh what phone is your Daily driver and do you use any other phone
besides that one also. I ask because I have a galaxy note 2 on at&t that is
my daily driver and I was think of getting the nexus 4 also to use. Is this
a good idea?
Cool vid josh, wish it was official cm, or at least an official nightly,
have you heard anything about 4.2 on the tf201? I have androwook hairy bean
1.51 with clemsyn elite 1.7ghz its really good. So much better than stock
Ya know what, I'm on Stock 4.1 Jelly Bean from Asus. I HATED having to deal
with things just not working or running like crap. I'm waiting for OFFICIAL
4.2 from Asus. I'll have a video the MOMENT they release that! :)
I am really looking forward to the 4.2 update for my prime :S just wish it
will be like 4.2.1 at least :D omgomgomg :D you are awesome Josh :D doing a
good job providing us with all this techical stuff
well, MOST things work. I haven't tried it in a long time and the biggest
thing I missed is ethernet. I have a video on how to connect your prime to
an ethernet cable, and this rom doesn't support it.
Not sure. And the latest update puts you on the newest bootloader, so I
would be VERY careful with that. If you don't have your NVFlash backed up,
I HIGHLY recommend that you don't do it!
@wwjoshdew what do you think about the Google Nexus 10? will you get it?
can you please make a video explaining what's the risks on rooting locked
boatloader? and how can i do it safely?
2:54 haha happens to me every time. that batch icon is so strange. why cant
they just put the word BATCH there instead if they can already put the word
MENU next to it...
You can NOT downgrade bootloaders UNLESS you ran NVFLash before upgrading
to Jelly Bean. (which would be impossible if yours came with Jelly Bean,
and that just sucks...)