Came tv single review Videos

+satostudiogear Ok thanks, I think I need to only use the lens I have with IS, the ones without aren't great. Be interested to know if you have any other lenses you can test that don't have IS?

+Lee Booth Not really, some shots were jittery because of me moving so fast but if I used it correctly I had no problems.

+turningkorean Hi, I have noticed these micro jitters on mine, I have used the A7s + 35mm FE 2.8 which seems to suffer really badly with this, I guess because it doesn't have any IS built in. I also have the 16-35mm which is better but I can still see a small shake, did you notice this in your footage?

+Jon Page  yeah, seriously! very serious I must say!

Thanks too much.. but i have see some pepole in youtube they use it with 5diii

+S.Mahmood Al-Wedaei No, too heavy of a camera to use with this gimbal.

+Passion Overdose Films Yes

+acreeo if the subject were wearing a (wireless lav), it would be better to record it externally to an audio recorder like the h4n or h5

+SWAF Jarrad . Thanks so much for your video posts regarding the CAME-TV Single. The link you have above //tinypic.com/r/s3lyec/8 for the GH4 settings; does that seem to stop the vibration? I tried using the 20mm prime on there with no success. I've also tried the 14-140 with a little more success. I'm apprehensive about making a lot of changes in the settings. The snapshot of the PID you posted seems to have everything including the motor config ramped up from my settings. I was wondering if you could share any other settings for the GH4 that CAME shared with you. Thanks so much!

+SWAF Jarrad Hi, Did their new PID really improved things? Mine just came and shift to the right (always) and the stabilisation is not that great (I Have the 12-35mm).

+AeroVideo Yea I am much more happy but still not quite there. I contacted CAME and they replied with some settings I could use for the GH4, basically saying that the stock PID settings are meant for full frame lenses (so more weight) which explains why my small lens didnt cope so well and this was an improvement. But the settings they sent are specific to the GH4 with this lens or the 12-35mm (link below). If you have a go at adjusting the PID settings that should be ok. But you'll just need to make sure the motor configuration remains the same as what they have specified, these are meant to be specific to the came singleI just havent had time to try it out yet.//tinypic.com/r/s3lyec/8

+Tyler Miranda Yea definitely cant touch the lens without it affecting the picture. I also tried it in low light the other day and it struggled with the focus unfortunately.

+Tyler Miranda Get yourself a DEC from Aputure! //www.amazon.co.uk/Aputure-Apt-DEC-EOS-MFT-PRO-Wireless-Remote-Adapter/dp/B00X097JSY/ref=sr_1_1?ie=UTF8&qid=1437505292&sr=8-1&keywords=aputure+dec+pro

Cheers Andrew, I will take ur advice and send CAME a msg and see what they think.

Mine has been delayed another week because they said in an email to myself that they have made a slight improvement to the second batch. Wonder what they have changed.

+SWAF Jarrad So long as you know how, you can try different PID settings. You can always change it back. Maybe later today i'll show how to change this. As long as you don't mess around with the other areas, you'll be fine.

+SWAF Jarrad Keep us updated, i would say something is def wrong, others are getting better results. I should have mine in a week as i pre-ordered, will let you know if i get similar results, thanks again for all the videos :-)

Yea more I look and compare to others the more I wonder what is going on :( balance seems perfect. Time to message CAME again and see what their suggestion is...

+Joe Taravella thanks too much.. but they told me its work good with Canon 5diii lens 1635mm f2.8

+S.Mahmood Al-Wedaei no too heavy.

+Otto Van De Steene I was thinking the same. I'm using a Sony a6000 and trying to do the wifi connect to record video and view it on my smart phone but it doesn't allow video control on the play memories app. @nextwavedv can you elaborate on how you are doing this?

+savedfaves Wasn't trying to be "mean," just save people 2 minutes. I'm glad these bros posted this because it looks pretty awesome and I haven't found anyone else reviewing it.

Pays to be nice, dude.

+Joe Taravella Well I have a Movi m10 system so I would say that I fully understand how to use, tune, and balance a gimbal. So yes, I know what I'm talking about when I say that every gimbal will need at some point depending on the load and demands some type of tuning. And came prohibits you from doing it. Maybe you should read in a bit more about the basics about gimbals before judging other people?

+AdmirSarajevo To each his own, I bought one and have used it numerous times with great results. Maybe you don't know how to balance it, in which case you shouldn't be giving recommendations on gear.

I hear good things about the Came. Dugdale and others certainly recommend it. Depends what weight you're talking.

+Zombie Clown I noticed the same thing when I got mine in however they say that the internal battery will last 20 hours which should be more than enough if true.

That was added recently, after most peoples had been posted out. Mine is faulty anyway, once i pan left won't pan back to the right. The guys from Came asked me change a bunch of settings and the problem is still there :-(

+Zombie Clown CAME-Single 3 Axis Gimbal Camera 32bit boards with Encoders//www.came-tv.com/camesingle-3-axis-gimbal-camera-32bit-boards-with-encoders-p-673.htmlWe have made changes to the CAME-SINGLE Battery. The original version required you to remove and recharge the batteries. The new version of the CAME-SINGLE has a internal rechargeable batteries built into the handle which allows for more power and stability to the system.

+Zombie Clown I'm going with the Pilotfly H1 now LOL

+Andrew Britton Thank you! Will do. I should have more up soon.

+rayrapphael bisnar got it. thanks.

+13 Stops Pocket Films hey, maybe about 5 hours in, maybe even less. The thing is that I'm not sure how much charge was on it prior to receiving it. When I charged it up to full and tested it, it felt even smoother for some reason. Maybe because the motors weren't so sensitive.

+rayrapphael bisnar how long did it take for the battery to get to that low point you mentioned? And are you using the built-in-battery model?

+Davidos Foto youre gonna love it! trying out some handle bars next paycheck. one thing i did notice was that if the battery gets really low, its pretty much unusable. so make sure you have it charged! once its fully charged its nice!

+Andrew Britton ever since i got it which was about 4 days ago, i haven't had to charge it :o I would say I've used it for about 4 hours tops since I got it. Im gonna try to see how long it'll last. The battery life was primarily why i chose it over the pilotfly!

+Ed Rakel Learn how to walk like a steadicam operator, google it. It's the only correct form.

+Ed Rakel Hopefully. :) Looking forward to seeing future uploads on this.

+huyked Your right, second time I used it. I need to acclimate myself with it more in that area. Practice makes.......

Olympus 12 mm f2.0 Just bought the Rokinon 7.5 / Can't wait to try it with the stabilizer. Will de-fish it with Premier Pro CC using the distort filter.

+AeroVideo Ya I'm getting a bit of vibration in a couple different positions.  Where are the settings to compensate vibration frequencies? I may have to make a couple adjustments to my PID. I think the jitter I'm getting is coming from the pitch as well.  Look forward to seeing some new footage :)

+mmmiked I went nuts:) Part of the problem I was having was vibration resonance throughout the gimbal. Turns out there are settings in the alexmos software that allow you to compensate for certain vibration frequencies. Once those are diminished I was able to tune the actual PID settings to higher values, especially pitch which is where I saw the most amount of jitter. I did play with motor power as well but I get best results when re-tuning the PID settings to my particular setup. My results since this test are way better now. Just haven't had any projects to post :(

+orange42 No, I've had other gimbals, thanks though, I really appreciate it. I was trying to walk as smooth as I could without looking too awkward :)

+Ed Smith I just got the A7sII, haven't tried it on the Single Gimbal yet. It's quite a bit heavier. Post some footage when you get your setup!

+Ed Smith Thanks Ed, I found I am more limited by adjustment range than by weight itself. My Sony A7s and 35mm 1.4 are right at the limit but I can't adjust the camera far enough back to balance. If I recall the 28-70 and A7s were well within the weight limits.

+Sandeep Chahal I think the weight limit is 1.2kg, I think I was around 1 kg with my camera lens combo. Since it's designed for one hand it does get a little tiring, but the gimbal holds the camera just fine. Hope that helps.

+AeroVideo а может быть я о чуваке с бородой и в очках )

+Stomatolog Moskov Спасибо i думают.

.... man i got another problem now. Once i pan all the way to the right with the joystick.... it won't pan to the left. But if i pan to the left after booting up its fine. Not impressed lol.

+Zombie Clown Maybe I have version 1.5 :) as mine will pan and tilt at the same time but I still have the removable batteries, which reminds me I need some spares.

The only positive i can notice is that the with the joystick you can pan and tilt at the same time, on V1 from what  understand you can only pan or tilt not both at the same time?

+Zombie Clown Wow, that's very unfortunate. I know it's difficult to know but are there any other changes?  I have the v1 version and have been playing around with notch filters in the software and getting better pitch tuning results. The default pitch tune had a PID of 15-.03-5 which is REALLY low. I've got it up to 30-.05-35 which seems to be performing much smoother for me. If you get a chance take a look at your PID settings.  Also the 2nd IMU was disabled in the software on mine. I had to enable it and did a 1 point calibration on it. Not sure if it has helped or not.